The Church of Sweden has in recent years offered activities such as Christian deep medita-tion, mindfulness and health days. This may be a way for the Church of Sweden to reach the modern man who would not otherwise have come to the church, but there are critics who argue that new spirituality has made its entry in the Church of Sweden. The phenomenon of Christian deep meditation has become increasingly common in the Church of Sweden. In order to satisfy my curiosity about what a Christian deep meditation is, I decided to write an essay about this. My question is as follows: How important is Christian deep meditation as a religious practice in the Church of Sweden? This essay is a qualitative study and I have cho-sen to perform eight pieces of interviews, two of them are recorded.

En studie i hur man kan arrangera, spela in och mixa slagverk i rollen som trumset. Artisten Nasimiyu Murumbas andra album Dig Deep innehåller en låt med trumset, Raise Your Arrow. Övriga har slagverk som täcker upp funktioner som trumsetet har. Processen beskrivs ur producentperspektiv med redovisning av arrangemang och analys av Raise Your Arrow samt tre av albumets övriga låtar, Free Ones, Dig Deep samt The Biggest Drum. Dessa analyseras från tre utgångspunkter: arrangemangmässig, konstnärlig och teknisk.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

The report aim to increase awareness of factors that have a major role whenremodelling an apartment building from the 1950s to offices.The thesis can be used for future projects when remodelling apartments to offices.The report can provide ideas and inspirations on how this can be done in aneffective way, ie . A way that does not require rebuilding the supporting structure,but only non bearing walls. The thesis also gives insight on the parts that will needto be supplemented from Boverket?s requirements in terms of accessibility,acoustic and fire requirements.The methods used in this thesis are literature studies, case study and sketch work.In the literature studies, the primary sources were Boverkets byggregler BBR, andArbetsmiljöverkets föreskrift AFS 2009:2 but other literature were also used. Theprimary items were chosen from the literature studies and they were furtheranalysed in the sketch work.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

This study was conducted in the "Kåtaberget" forest reserve in Västerbotten in the summer of 1999. In the summer of 1995, a prescribed burning was performed in the reserve. In some places where coarse dry woody debris (logs and stumps) was present, the fire consumed the wood, as well as parts of the humus layer, creating deep-burned patches. The low intensity ground fire also created dead woody debris by burning off living trees with open fire scars, as well as standing dead trees. In this study, the post-fire tree seedling establishment was examined, with special attention given to the former presence of woody debris. The study also includes a survey of the areal extent of deep-burned patches, as well as an examination of tree seedling establishment in these patches, compared to other burnt ground.

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

AimThe aim of this study was to develop and perform a reliability test of a questionnaire regarding side dominance in order to identify the dominant/non-dominant side in students at the Swedish alpine ski high school.MethodA questionnaire of side dominance of the upper and lower extremity was developed, and its reliability was tested according to the test-retest design. A total of 121 subjects answered the questionnaire twice. The questionnaire included five questions about side dominance, i.e. what hand/arm or foot/leg (left /right) that one prefers to use as a first choice when writing, throwing, kicking a ball, jumping over a fence and stair climbing. Furthermore, there was a question whether the responder has a safer/better ski turn to the left or to the right.

Do our imaginations of real landscapes get affected by works of art such as paintings, myths and literature? They often give very colourful descriptions in words as well as pictures. Do they actually change our feelings for the landscapes we are in and carry around as images inside? Close your eyes and take a few deep breaths. Imagine that you are leaning against a wooden fence a mild summer evening.

A great number of empirical researches show that hedging is associated with higher firm value, particularly hedging interest rate and exchange rate. However, there is no clear support for value-added risk management hypothesis in the case of producers of commodities. Moreover, according to Shrand and Unal (1997), there are two types of risks, core business risks (or core risk) and homogeneous risks (or non core risks), which are based on a firm's comparative advantages with respects to the source of risk. Firm can earn economic profits for bearing core risks in which it has a comparative information advantage. Firm earn a zero economic rents for bearing non-core risks, where it has no advantage information than its competitors.

A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.

AbstractObjectivePatients with Parkinson?s disease often have symptoms of dysphagia. These swallowingproblems have consequences for quality of life as well for the physical wellbeing of thepatients. AimThe aim of this study was to describe and correlate Swallowing Quality of Life (SWAL-QOL)scores, self-assessment of swallowing function using a visual analogue scale and the resultsfrom a fiber endoscopic evaluation of swallowing function in patients who had been selectedfor Deep Brain Stimulation in caudal zona incerta. A secondary aim was to correlate diseaseduration with results from SWAL-QOL and the fiber endoscopic evaluation of swallowingfunction.MethodTen male Parkinson?s patients (age 45-69 yrs, median 61.5 yrs) who were selected for DeepBrain Stimulation completing the Swallowing Quality of life form, as well as rating theirswallowing function using a visual analogue scale and undergoing a fiber endoscopicevaluation of their swallowing function.    ResultsThe median total SWAL-QOL score was 94% while the mean was 91%.