When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

We have carried out a study of a classification system for the Swedish collection at The Royal Library in Stockholm from 1887. It was printed in 50 copies. The constructor, Bernhard Lundstedt, and his colleagues used it as guidance in lack of a catalogue. We regard it a local classification system. Little research has been done on old classification systems, but Francis Miksa points out the importance of examining them.

This thesis reports on the methodology and results of a study with one retailers 73 units to investigate factors of the store managers leadership that influence productivity performance in store. The study determine the impact of ten independent variables in terms of the store managers leadership on four performance measures: (3) three productivity measures: Sales Over Labor (SALOL), Sales Over Inventory (SALOI) and Sales Over Square-metre (SALOS) and (1) one profit measure: Contribution Income Over Square-metre (CIOS). The result shows that the leadership factors give no more explanation to the economic results after factors of local market condition and the store attributes are taking in to account. The store manager's leadership can though influence his or her decision-making in-store. The store manager's decision to staff the store more intense (higher service-intensity) can increase the level of contribution income over square metre in-store..

This degree project deals with the creation of a business system for Gamersneed Sweden. The system is divided into two parts, one windows appliction and one websolution..

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

The purpose with this essay is to examine different roles of leadership in the working environment by interviewing ex-students that have taken their degree from Halmstad Högskola and its construction program. How do these ex-students handle to be in a position of power in their everday life and how do they handle decision making? Do they find that the education they have recieved in any way has helped them in regard for leadership or do they rather conclude that further education in the area of leadership would be beneficial? These are the questions that I set out to shed some light over in this essay. This study consists of one part theory and one empirical part. The empirical part was accomplished by interviewing ex-students from Halmstad Högskola and this part was later compiled with relevant theories on the subject which were obtained from books , internet and various databases.The results from the interviews show that the general point of view is that the subjects containing leadership in their education hasn't really helped them.

The purpose of this paper is to get a conception how prioritization and decision making works in technologically advanced companies. We wanted to understand how to administrate models and how to prioritize the best ideas and relate these to technologically advanced companies. How does the company make these decisions and who is responsible?We have chosen to observe TranSiC, a Swedish technologically advanced company that manufacture silicon carbide transistors. They currently have nine employees and mange 10-20 projects simultaneously, but are aiming to expand their business.

This thesis purpose is to investigate the sociopolitical factors and causes that led to why KB chose not to use the criteria and guidelines for their digitization activities are described in DIGSAM. To do this I focused on three research questions;- What factors (internal / external) led to the decision not to use the criteria guidelines for digitization, which is described in the policy document DIGSAM and what arguments and opinions formed the basis for the decision.- What is the Library's digitization activities, the factors, criteria and guidelines governing activity in the current situation? - Will KB's choice not to use DIGSAM as a whole in their digitization activities affect national library's role as a beacon for the Swedish libraries digital work? In what way and why? In order to answer these questions I interviewed three of KB:s librarians who had extensive knowledge of digitization and DIGSAM. I chose to also use a pilotstudy that was conducted at KB in the of spring 2010. The idea was to use this material as a basis to build on.As a theoretical framework, I chose to use a socio-political theory of Ingrid Mason.

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

In January 2005 the emission allowance system was introduced within the European Union and the first period ends at the end of 2007. The system was introduced in order to decrease the wastes of carbon dioxide and the system is a part of ratifying the Kyoto ?protocol which first period runs between 2008-2012.The idea of the system is to reduce the wastes of carbon dioxide where it costs less to do so and the expenses for the society therefore are as diminutive as possible. Different theories explain that companies can benefit from environment legislation and can depending on the company?s attitude gain competitive advantages improve its productivity and thereby increase its profitability.With this in mind, the study aims at examining how the introduction of the emission trade system has influenced Swedish smaller companies in the distant heating industry, with focus on the factors attitude, innovation, competition and profitability.

A power system will inevitably be subjected to transient overvoltages, most often produced by switching operations and lightning strikes. These transient overvoltages may harm sensitive equipment without sufficient protection, but it is not an easy task to predict what transients may occur or how they affect the system. A fault occurred in a low voltage system at Forsmark 2012 and overvoltages from lightning were concluded as the probable cause. The three aims with this thesis are to develop and test a model of the power system at Forsmark 3, analyse the transient behaviour of the system when subjected to lightning surges and identify critical parameters, and lastly to provide a tool for investigating the protection of the system. The modelling and simulations were performed in the freely available simulation program LT Spice.