The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

This Bachelor thesis examines the possibility of replacing an outdated, analog video recording system to a digital counterpart. It is key that the video and audio signals remain synchronized, generator locked and time stamped. It is up to nine different video sources and a number of audio sources to be recorded and treated in such a manner which enables synchronized playback. The  different video sources do not always follow a universal standard, and differ from format as well as resolution. This thesis aims to compare a number of state of the art commercial of the shelf solutions with proprietary hardware.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

In autumn 2010, the Division of Civil Engineering at the Swedish building contractorPEAB made a campaign to increase the number of reported incidents. Informationwas sent to the branch manager who was responsible to enlighten the employees onthe establishment. The goal of PEAB Division of Civil Engineering is to have at least 10reported incidents per accident that generate more than 8 hours absence. Therefore,it is important that the employees understand how the report system for incidentsworks. The number of reported incidents differs between regions.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

The purpose of this thesis is to analyse and propose improvements to the cost accounting system in use at an airline operating on the Swedish market. The choice of study object is based on the airline?s desire to have its cost accounting system evaluated. During the analysis we have identified a number of points where the current cost accounting system does not correspond to its intended purpose. These points include significant groups of costs not being considered in the current system, potential over capacity is not visible and logic connections between distribution keys and the use of resources are sometimes lacking.

In the present thesis, we have studied the management control system in Enskede-Årsta-Vantör, one of Stockholm?s municipal districts, with focus on theories about New Public Management (NPM). When NPM was introduced, a number of complications arose. Some of these, along with the district?s solutions of the complications, are described and analyzed using e.g.

Swedish libraries are currently discussing andimplementing the classification system Dewey (DDC).Most libraries in Sweden have used the Swedishclassification system SAB until recently. In 2008 TheRoyal Library of Sweden (KB) decided to switch fromSAB to DDC. Many academic libraries chose to followKB?s example and by January 2011 a switch was made atKB and at many academic libraries.The aim of this master thesis is to examine and analysethe library sector?s discussion that occurred before andduring the Swedish switch from SAB to DDC. The mainquestion asked is; What is being discussed about Dewey2010-2011 and in what manner? To organize and anlysethis discussion discourse analysis is used.

The intention has been to look at the school system in South Africa and specifically at arts and culture in grade 10 to 12. I have visited a number of classes and interviewed the teachers working at the art centre PJ Olivier in Stellenbosch. By doing this I wanted to get to know the system and to understand the intentions that the curriculum describes.I have all through the study related the areas I?ve looked at to the curriculum to see how well the intentions are implemented. I have also compared everything with the Swedish school system.The curriculum has good intentions but the country has a lot to do before they reach the goals with a school system where everybody is included and where there is ?ubuntu? (Zulu word for humanity or I am what I am because of what we all are).

In the haulage business customers are constantly requesting new features. Hence thedevelopment department must constantly update their system which ultimatelyresults in a variety of versions of the system. The large number of versions creates acomplexity which often reduces product quality and extends the developmentlifecycle time.The work on the following thesis has taken place at Scania?s Fleet Managementdepartment, which develops tools for hauliers to track their vehicle fleet in real time.The purpose of this thesis was to examine how Scania can handle an increasedamount of versions of the Fleet Management System which Scania expect will be seenin the future. The investigation was conducted by preparing a number of differentscenarios that formed the basis for a discussion of what these different scenarioswould mean for different parts of Scania?s business.

The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.

This report describes a system for verification of fingerprints against a previous created template. It describes how and why a fingerprint image must be processed before it can be used to either identify or verify a person. The method is based on special features of a fingerprint, called minutiae points. The whole process from image to matching is described, every step in the process with image enhancement, binarization, thinning and how to find the minutiae points. Also what false minutiae points are, how they arise, why they deteriorate the result, and how to handle them, is discussed.