The main purpose of this study was to determine the impact of bedding material on the faecal microflora of horses. Another objective was to investigate the hygienic and physical qualities of the bedding materials used and how these may change in the course of the trial period. The bedding materials used were sphagnum peat and wood shavings. Six horses had each material as bedding for a three week period in a change?over experiment.

The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

Stronger demand has been put on forestry to show environmental considerations during harvesting. This is especially for crossings of brooks with sensitive elements and great care should be observed when they are to be crossed during harvesting by logging machines. For that reason Hultdins has constructed a portable bridge that can be used for those occasions. The bridge has been developed in accordance with wishes from SCA forest, since they have a great deal of brooks in their forests and in private forests from where they buy part of their wood supply. The aim for this report is to investigate if this portable bridge can be of interest for the forestry market. The research has been made at SCA skog in Medelpad and Norrskog in Medelpad.

This study was conducted in the "Kåtaberget" forest reserve in Västerbotten in the summer of 1999. In the summer of 1995, a prescribed burning was performed in the reserve. In some places where coarse dry woody debris (logs and stumps) was present, the fire consumed the wood, as well as parts of the humus layer, creating deep-burned patches. The low intensity ground fire also created Dead woody debris by burning off living trees with open fire scars, as well as standing dead trees. In this study, the post-fire tree seedling establishment was examined, with special attention given to the former presence of woody debris. The study also includes a survey of the areal extent of deep-burned patches, as well as an examination of tree seedling establishment in these patches, compared to other burnt ground.

?Development of Norway spruce, Douglas fir beech and Scots pine with a larch shelter wood? is a report written by Per-Olof Magnusson. The thesis is a compulsory part of forest engineer program at ?Skogsmästarskolan?, SLU, Skinnskatteberg, Sweden. The purpose of this report is to describe and evaluate an experiment with hybrid larch (Larix x eurolepis) as shelter wood, and different tree species growth and survival depending on the density of the shelter wood. The experiment is conducted by southern Swedish forest research centre, faculty of forestry, SLU in Alnarp. The hybrid larch ought to be an interesting alternative to birch (Betula sp.) as shelterwood on suitable sites in southern Sweden.

I dag råder det brist på död ved i Sveriges skogar. Detta på grund av det intensiva skogsbruket där man kalhugger och plockar bort all liggande ved. Dock är det viktigt med många döda träd i olika nedbrytningsstadier för många skogslevande arter. Svenska skogar har få urskogar där naturliga avdödningsprocesser av träd får ske och därför minskar den biologiska mångfalden i skogen. Tre arter som endast trivs i naturskog är tickorna ullticka, Phellinus ferrugineofuscus, gränsticka, Phellinus nigrolimitatus och vedticka, Phellinus viticola.

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.

Plagionotus detritus is a threatend longhorn beetle that only exists at one site in Sweden. It is saproxylic and depending on recently dead coarse oak wood for its larval development. Trees at Djurgården, Stockholm that have been colonized by Plagionotus detritus has been studied to find out the habitat preferences of the species and to see what affects the density of beetles in a tree. The bark of some trees and wood from the breeding project at Nordens Ark has also been studied to find out what affects the species reproductive success. The reproductive success was measured in two ways, the larval mortality and the size of the hatching holes.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

In 1994 a new Forestry Act was accepted in Sweden. One of its aims was to raise the consideration for preservation of biodiversity. Since this happened over 15 years ago there is now an interest in analyzing if the law has been effective in its purpose. In this study methods suitable for analysis are being investigated. The study contents a pilot study of methods for five parameters that can validate if the law has been followed.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

The main purpose of this study is to investigate how to reduce the high, and every decade raising, pre-clearance cost. The pre-clearance is today carried out with a brush saw and paid per labour hour. All small trees not suitable for pulpwood are removed to simplify the later work of the harvester. The study compares the economic results from thinning of four parcels each treated differently regarding harsh or light pre-clearance and extraction of only pulpwood, or both pulpwood and fuel wood. In this type of spruce stand the study indicates that a lighter pre-clearance, followed up with both pulpwood and a fuel wood extraction, has a much better economy than the traditional method of hard pre-clearance and only pulpwood extraction..

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.