Skanska is using work schedules that are specifically designed for employees in the production. These work schedules are called best practice. These are guides containing technical descriptions, design references, capabilities, etc. for work activities. This support function facilitates the work preparation and planning of future work.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input Data, and insufficient experience of workingwith LCC calculations.

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test Data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test Data compression method based on a modified facsimile code.

I ett företag finns Data utspridd i olika Datasystem. För att lättare och snabbare komma åt Data bör Data finnas samlad på ett ställe d.v.s. ett Datalager. Om Datalagret ska fungera som ett beslutsstöd för företagsledningen är det viktigt att Data håller en hög Datakvalitetsnivå så att beslut fattas som gynnar företaget. För att kontrollera Datakvalitet kan Datakvalitetsverktyg användas.

 Extra high requirements are made on all systems in health care that they are functional and usable,´something, however, that is not always the case. At Emergency Admissions at Sahlgrenska University´Hospital many systems are in use at the same time and it happens that much overhead is caused by having to fill in the same information in different places. In addition, Data that is gathered is to a large extent saved in free text format, which means that it cannot be used in a larger context such as research, quality control or for decision support. Data is saved in the patient file only for the treatment process of the individual patient.A Data collecting system with decision support functionality could be a first step towards reducing Emergency Admissions? costs and patients? waiting times by providing a structured method of Data collection.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input Data, and insufficient experience of workingwith LCC calculations.

Syftet med denna uppsats var att ta reda på om ett tidslinjegränssnitt är ett lämpligt sätt att visualisera personlig Data på för vidare utveckling inom projektet A4Cloud. Uppsatsens målgrupp är huvudsakligen medlemmar i A4Cloud men är även intressant för personer med intresse för personlig Data eller tidslinjegränssnitt.För att uppnå detta syfte skapades en prototyp över detta användargränssnitt med begränsad funktionalitet för att utföra tester på, för denna studie testades användargränssnittet på datorskärmar. Användningstester med observation gjordes på prototypen med åtta testpersoner för att få fram information om hur användare uppfattade prototypen.Enligt resultaten kan tidslinjekonceptet bli väldigt omtyckt och enkelt att använda. Det finns definitivt skäl till vidareutveckling av detta koncept. Även vissa brister i konceptet och prototypen hittades.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel Data set of 50 companies over 5 years (2008-2012). The Data used is yearly Data obtained from the Swedish district heating association.

IP-adresserna under IPv4 är inte tillräckliga och har på många delar i världen redan tagit slut. IPv6 erbjuder många fler tillgängliga adresser och övergången till protokollet har redan börjat. Det Gävlebaserade företaget Interlan erbjuder en tjänst som kontrollerar om kommuner och myndigheter i de nordiska länderna är nåbara via IPv6 samt om de är säkrade med DNSSEC. Denna rapport beskriver jobbet med att förbättra och göra deras tjänst anpassningsbar för flera länder. Processen som beskrivs är parametriseringen av skripten som samlar Data, skapandet av en Databas att lagra Data i, och ändringar till hur Data presenteras så att det går att lägga till flera länder..

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on Data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of Data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available Data.

Volvo Construction Equipment i Braås är världsledande inom tillverkning av ramstyrda dumprar. I Braås utförs därför en mängd olika testfall där man kartlägger utfallen genom insamling av Data från CAN-bussar i dumpern. Om ett test går fel beskrivs det i en felrapport med tillhörande beskrivning av händelseförloppet. Idag finns det inget enhetligt sätt att visa händelse ihop med position.För att analysera insamlad Data används idag CANalyzer. Fördelen är att det går att visa insamlad Data på ett strukturerat grafiskt sätt.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to Data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

Datorspelsbranschen är en relativt ung bransch, både jämfört med andra delarav mjukvaruindustrin och nöjesbranschen. En av de stora utmaningarnaspelutvecklare står inför är planeringen av den långsiktiga kompetensförsörjningen.Dock saknas sammanställda historiska Data och applicerbararesursestimeringsmetoder, vilket gör detta arbete näst intill omöjligt. Det förstadelmålet med den här studien är att samla in historiska Data angående strukturenoch storleken på utvecklingsteam som utvecklat AAA-spel (professionelltutvecklade spel med en hög budget) för pc-datorer. Datan samlas in frånkreditlistor hämtade via webbsidan Mobygames.com. Det andra delmålet beståri att utreda huruvida den insamlade Datan kan appliceras på modeller förestimering av framtida personalbehov.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a Data analysis software for the Opcon Powerbox has been developed in which measurement Data is retrieved and handled from the Opcon Powerbox.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser Data against the reference instrument Data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement Data was also used for the swiveling laser Data.