AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

Within the ambulance care in Uppsala County a vacuum splint is used to immobilize fractures on extremities. The research available on which method of immobilizing to prefer during pre-hospital treatment is limited. The purpose of this pilot study was to examine the perceptions of the ambulance personal in Uppsala County on the issue of usability of SAM-splint and vacuum splint when immobilizing extremities. The project was also aimed at researching if SAM-splint could be seen as an alternative or a complement to vacuum splint, and to get an apprehension on any evident differences in patients? perceived pain when treated with the two different approaches. A descriptive comparative study was carried out. All patients, regardless of age and sex, with the need of immobilizing supposed fractures, were included.  Patients with suspected femur fracture, collum fracture, or where pre-hospital care was not possible or in question, was excluded.

This essay deals with the rationale and aims for doing cultural or aesthetic activities and projects in schools, and gives special focus to a specific group of students, attending schools provided at special residential homes for young people (sa?rskilda ungdomshem). These homes receive young people with psychosocial and substance misuse problems and who show tendencies towards criminal behavior. The essay investigates how working with a cultural project in schools at these residential homes is justified and also elucidates how this specific group of students and their problems are constructed in the documents surrounding the project. The essay will further ponder over possible educational and pedagogical consequences of these constructions.The investigation has its theoretical frame work in curriculum theory.

Semantiska webben är ett begrepp som handlar om att göra data tillgängligt på ett sätt som gör att datorer kan söka, tolka och sätta data i ett sammanhang. Då mycket av datalagring idag sker i relationsdatabaser behövs nya sätt att omvandla och lagra data för att det ska vara tillgängligt för den semantiska webben.Forskning som genomförts har visat att transformering av data från relationsdatabaser till RDF som är det format som gör data sökbart på semantiska webben är möjlig men det finns idag ingen standardisering för hur detta ska ske.För att data som transformeras ska få rätt betydelse i RDF så krävs ontologier som beskriver olika begrepps relationer. Nationella vägdatabasen (NVDB) är en relationsdatabas som hantera geospatiala data som används i olika geografiska informationssystem (GIS). För samarbetspartnern Triona var det intressant att beskriva hur denna typ av data kan omvandlas för att passa den semantiska webben.Syftet var att analysera hur man överför geospatiala data från en relationsdatabas till den semantiska webben. Målet med studien var att skapa en modell för hur man överför geospatiala data till i en relationsdatabas till en RDF-lagring och hur man skapar en ontologi som passar för NVDB?s data och datastruktur.En fallstudie genomfördes med dokumentstudier utifrån en inledande litteraturstudie.En ontologi skapades för det specifika fallet och utifrån detta skapades en modell för hur man överför geospatiala data från NVDB till RDF via programvaran TripleGeo.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

My work has been to create a magazine for iPad to explore this format, whichthere are mixed feelings about. Instead of seeing the digital format as an enemy ofthe printed magazine, I have chosen to see it as an opportunity.I have given myself the task of designing a magazine that can justify the useof the digital magazine. I have looked at the identity of the magazine, but mainlyexplored the format and its prerequisites.I was triggered to do the project when I saw people who are just making a pdfof the printed magazine and publish it digitally. I have during my work discoveredhow near or far away you can be from the printed magazine.The format of the iPad has multiple aspects to look upon; one that turned outto be clear in my project was navigation. Working with a spread has its problemsand opportunities; the same applies to an article that is larger than a screen.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

We are getting smarter. Our knowledge of the world around us is increasing rapidly and our population spend a big portion of their time in school studying it. But art and craft are moving out to give room for more theoretical subjects. Today many of us can not even fix a torn shirt without help. We buy new ones, they are cheap enough.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

Ett datalager är ett beslutstödssystem som integrerar stora mängder data från interna och externa källor. Dessutom är datalagret subjektorienterat, vilket innebär att det är organsierat kring ett antal betydelsefulla affärsdomäner som företaget lagrar data om. Många menar att det börjar bli allt viktigare för företag att söka information utanför verksamheten. Detta kan göras genom att de externa affärsdomänerna skannas av på information.Syftet med detta arbete är att ta reda på i vilken utsträckning i nuläget som organisationer lagrar data om affärsdomäner i sitt datalager. För att ta reda på detta har företag som använder datalager kontaktats och intervjuats.Resultatet visar att företag lagrar data om externa affärsdomäner, fast i ganska liten utsträckning.

This thesis aims to examine how the quality of data that is entered into and retrieved from a corporate group's ERP and Data Warehouse systems can be improved. The corporate group has already taken several measures that will improve the quality of data. For instance the corporate group has updated and merged the previous ERP systems into one. At the same time the corporate group adjusted the settings in the updated ERP system, so that it will be harder to register incorrect data in the ERP system. With regards to the processes and routines, the studied department has efficient written routines and processes.