The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

IP-adresserna under IPv4 är inte tillräckliga och har på många delar i världen redan tagit slut. IPv6 erbjuder många fler tillgängliga adresser och övergången till protokollet har redan börjat. Det Gävlebaserade företaget Interlan erbjuder en tjänst som kontrollerar om kommuner och myndigheter i de nordiska länderna är nåbara via IPv6 samt om de är säkrade med DNSSEC. Denna rapport beskriver jobbet med att förbättra och göra deras tjänst anpassningsbar för flera länder. Processen som beskrivs är parametriseringen av skripten som samlar data, skapandet av en databas att lagra data i, och ändringar till hur data presenteras så att det går att lägga till flera länder..

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

Network RTK is a real-time technique for accurate positioning with Global Navigation Satellite Systems (GNSS). The technology means the use of correction data from a network of GNSS receivers with known positions (reference stations) to reduce the uncertainty in position for the user´s GNSS receiver (rover). However, this requires that the correction data can be transferred seamlessly to the user in real time. Commonly the corrections are transferred via mobile phones. The Swedish National Land Survey operates a nationwide Network RTK service, where users can receive correction data via GSM or mobile Internet (GPRS).

This thesis tries to explore how different strategies of internal communication are used in actual situations within an organization. Specifically, the purpose is to investigate how the internal communication within the Swedish University of Agricultural Sciences (SLU) has been carried out during their work to change their organizational structure, and, how this can be understood in terms of existing theories for strategic communication. The research questions explored are:What are the chosen strategies used to communicate the changes internally?How can these strategies be understood in terms of existing theories?What are the views of the employees on the communication and what are the relations between their views, the chosen strategies and existing theories?The theoretical ground work chosen is mainly the work by Cornelissen (2008), Dalfelt (2005), Johansson (2011) and Larsson (2008). The method chosen for the empirical part of the study is semi-structured qualitative interviews.

The purpose of this Master's thesis is to find possible explanations of variation in light scattering in a fine paper. Samples were collected from each second tambour during a time period of two weeks from a paper machine at MoDo Paper, Husum. Two data sets, consisting of 20 and 95 observations, were selected for extensive analysises of tensile and structual properties. The data was evaluated with multivariate data techniques using the programs Simca and Extract. The results of PCA- and PLS- analysises pointed out 3 of 52 variables as important for the variations in light scattering.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

Uppsatsen beskriver arbetet och undersökning för hur deduplicering i filsystemet ZFS påverkar effektförbrukningen. En större mängd redundant data förekommer i centraliserade lagringssystem som förser virtualiserade servrar med lagringsutrymme. Deduplicering kan för den typen av lagringsmiljö eliminera redundant data och ger en stor besparing av lagringsutrymme. Frågan som undersökningen avsåg att besvara var hur ett lagringssystem påverkas av det extra arbete som det innebär att deduplicera data i realtid.Metoden för att undersöka problemet var att utföra fem experiment med olika typer av scenarion. Varje scenario innebar att filer kopierades till ett lagringssystem med eller utan deduplicering för att senare kunna analysera skillnaden.

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

Jag har undersökt vad människor i Folkmusiksverige vill läsa om på en kommande internetportal, folkmusikportalen.se. Detta har jag gjort genom en enkät, som låg på Internet och var öppen i två veckor. Jag fick in 81 svar. Frågorna jag ställde handlade om respondenternas bakgrund, hur de ställer sig till reklam, vad de vill läsa/diskutera om och vilka konferenser de eventuellt har besökt och vilka ämnen som isf togs upp där.Jag har kommit fram till att intresset för en kommande portal är stort. Jag har fått mycket förslag på vilka ämnen och funktioner som skulle kunna finnas med på portalen.

Today Holmen Skog finds and selects suitable thinning stands using data on upper height and basal area. These figures are often based on basic forest data that has been updated with the help of growth prediction models. The problem is that these figures are not always correct. The aim of this study was to investigate if a combination of data from a profiling laser and a digital camera for low elevation photography, can be used for collecting data on number of stems per ha, tree species mixture as well as basal area weighted mean height and upper height for stands. The possibility to use these data to assess the need for thinning cutting was also investigated.Laser data and aerial photographs were collected from a helicopter operating at an approximate height of 100 meters.

The rise in prevalence and severity of obesity and related diseases imposes increasing costs on society. The objective of this thesis is to discuss and estimate the possible effects of a so-called fat tax as a tool for minimizing these costs. Two alternatives for differentiation of the value-added tax (VAT) on food are compared. The first alternative is an increase of the VAT levied on food containing saturated fatty acids. The second alternative is a subsidy on fruit and vegetables in the form of a VAT at zero percent, instead of today?s twelve percent.

This report describes a bachelor thesis work performed at the cloud storage company CloudMe in Linköping, Sweden. The storage service provided by CloudMe allows users to access their files seamlessly from multiple units at the same time. In the cloud there is storage provided for contacts, calendar and e-mail, which is data nowadays normally used by smart phones.Exchange ActiveSync is a protocol developed by Microsoft which, among much more, provides functionality to synchronize the previously described data. This protocol is supported by the smart phone developers and the ability to synchronize over the exchange protocol is implemented in products by default. Due to this fact it would be preferable to implement support for synchronization from CloudMe to phones over this protocol.

För att flytta information från en databas till ett datalager används det idag olika tekniker. Existerande transformeringstekniker baseras på att en applikation hanterar detta. Detta examensarbete går ut på att skapa och undersöka en metod som istället genomför transformeringen i en databas. Denna transformering är metadatadriven, eftersom metadata är den information om data som krävs för att en transformering ska vara möjlig. Arbetet bygger därför på en metadatastudie som behandlar representation och struktur av metadata.