Due to the growing wild boar (Sus scrofa L.) population in Sweden there has been an increase in wild boar related traffic accidents, Damage on cropland, and conflicts regarding the management of the wild boar. Knowing what makes the wild boar reproduce and survive more or less successfully in different geographic areas is an important part of managing the population. According to previous studies the wild boars rate of increase varies from county to county. The aim of this study was to test, on the county scale level, if landscape composition and diversity as well as people and hunter densities might be the reason for this variation. The first hypothesis was that a big proportion of forests and cropland would increase the rate of increase.

The location on the river delta of Klarälven, adjacent to lake Vänern, makes Karlstad one of the Swedish cities where a significant flood risk is present. The city has several major floods in its memory which has caused great material Damage and economic losses, the latest of which occurred in the winter of year 2000/2001. The purpose of the study is to examine how the approach to flood risk has changed in the municipality of Karlstad since the 1950s, and how this change has affected the current situation regarding the city's vulnerability to flooding. To investigate this, a document analysis was conducted, where key documents in the media and from the municipality of Karlstad was studied. Furthermore, an interview study was conducted with respondents who currently are employed or previously have been employed in the municipality of Karlstad, who in various ways work with issues of flood risk. The result of the study shows that several changes have taken place since the 1950s in terms of the municipality's approach to flood risk, which for instance has led to preventative measures being taken to a greater extent than previously in the physical planning.

Marine heatwaves (MHW) have become increasingly common in recent decades due to greenhouse gas emissions that have caused climate change. A marine heatwave is when the sea surface temperature rises, which Damage many different ecosystems in the sea. One ecosystem that is sensitive to temperature changes is tropical coral reefs, which are at risk of bleaching during marine heatwaves. Coral bleaching is when its symbionts leave the coral and they lose their color, while also starving to death as they lose their food source. The purpose of this report was therefore to investigate what the connection between marine heatwaves and coral bleaching looks like, and to see if there are any geographical differences.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking Damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Fuktskador på uteluftsventilerade vindar är ett ökat problem, i det mer miljömedvetna Sverige. Genom tjockare vindsbjälklagsisolering minskar både energiförlusten genom bjälklaget och uppvärmningsbehovet i huset, men hur många funderar på vad som händer med det förändrade klimatet på vinden och hur det kan påverka fuktförhållandena i utsatta delar av konstruktionen.Studier från Chalmers Tekniska Högskola har framställt ett fuktberäkningsprogram för uteluftsventilerade vindar vid namn Simple Cold Attic Model. Programmets funktion och potential har prövats i denna rapport genom en beräkningsanalys av en uteluftsventilerad vindskonstruktion. Försök till att förbättra fuktsäkerheten i konstruktionen har utförts och redovisas i rapporten. Studien har påvisat att den studerade konstruktionen inte är fuktsäker om den uppförs i Stockholmsområdet. Det visades även att aktiva val i konstruktionen kan förebygga fuktskador. Studien har påvisat vikten av inte beräkna med medelår för klimat och hur det påverkar beräkningsresultatet av mögeltillväxt.

Staphylococcus aureus belongs to the normal flora. Many healthy people are colonized by the bacterium mainly in the nose but also on the skin and on other mucous membranes without showing symptoms. After Damage to the skin, the bacterium can enter the wound and cause infections. Methicillin-resistant S. aureus (MRSA) is resistant to b-lactam antibiotics such as penicillin and methicillin.

I Sverige finns det ungefär 475 000 hektar skogsmark där den från Kanada introducerade contortatallen (Pinus contorta) utgör mer än 65 % av den totala grundytan. Genom aktiv skogsanläggning har P. contorta blivit Sveriges sjunde vanligaste trädart sett i ett volymmässigt perspektiv. Därför är det av stor vikt att ha god kännedom om hur arten sprider sig i det svenska skogsekosystemet. När P. contorta introducerades ansågs den sakna förmåga att självsprida sig (fröså sig), men senare visade det sig att andelen serotina kottar varierar mellan olika träd och att den kan självsprida sig på produktiv skogsmark. Resultatet av studien visar att P.

I mars 1999 inledde NATO operationen Allied Force i dåvarande Förbundsrepubliken Jugoslavien. Operationen blev kritiserad för att ha tillfogat s.k. ?collateral Damage? och vissa ickestatliga organisationer hävdade att brott mot krigets lagar begåtts.Specifika dokument, som reglerar luftkrigföring, har historiskt sett saknats. Detta har inneburit problem för bedömningar av enskilda fall.

For many decades the increase in traffic volume, expansion of highways and infrastructure has lead to an increase of wildlife vehicle collisions which are unfortunately very common in many countries today. They cause great deal of material Damage and even kill humans or wildlife. Measures in the form of warning signs, under- and overpasses and fencing have been implemented for a long time with the help of observation by hunters and collisions sites. However this study focuses on the moose?s perspective and the variables that, both spatially and temporally, could have an effect on why and when moose are close to certain types of roads.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture Damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The survey is a qualitative study that aims to investigate the ethnic housing segregation in the residential area around Malmvägen that is located in Sollentuna. Malmvägen is a millionprogramarea that?s made up of unattractive tall buildings with grey facades. The majority of the residents have foreign backgrounds and the unemployment rate is high among the youths in the area. The apartment rents on Malmvägen are low and many of the residents belong to the subclass of society.

The aim of this examination project was to work with the processof making a pattern collection for fabrics. The collectionshould consist of at least three patterns with report measurementssuitable for screen print. I wanted the pattern collectionto be a simple, mystic and colourful collection with a folklorespirit like the popular rural life I experienced during my childhood.The purpose of the project was that I during the working processwould deepen my estethic background to enforce my personalgraphic expression ability and evolve as a pattern designer.I wanted to try to mix my personal view of domestic graphicexpression with another language that I gained in recent years.This I wanted to do in order to find the tools that could helpme clarify and develop my pattern signature.A few of the questions that I had about this project were if thelong scetching phase that I planned would help or Damage theproject.I also thought it would be interesting to experiment with coloursin this project. I wanted to see how far I dared to go inmatter of colours as well as how the patterns would be visuallyexperienced if I for example reduced one colour or replaced itwith the opposite colour.I thought it was inspiring to work with traditional techniqueswith the colours. It was only positive that part of the patternstory telling was developed in an unpredicted direction duringthe scetching phase.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue Damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with Damage caused by damp in bathrooms. Have resultade in regulations.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.