Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

Detta examensarbete genomfördes våren 2013 på Karlstads universitet där TD Rail & Industry i Västerås stod som uppdragsgivare. Projektet innefattade att kartlägga nuvarande omlastningslösningar av enhetslaster mellan järnvägstransporter och vägtransporter, och utarbeta en konceptuell omlastningslösning med fokus på att öka järnvägstransporternas flexibilitet gentemot vägtransporterna. Där vikten lades på att utarbeta ett välarbetat helhetskoncept.Projektet genomfördes med designprocessen som grund och innehöll bland annat momenten; förstudie, kravspecificering, idégenerering, konceptval m.m.Resultatet blev en vidareutveckling av det redan befintliga systemet CCT som bygger på horisontell överföringsteknik och möjliggör därför omlastning av enhetslaster direkt under kontaktledning. Skillnaden mellan RES och CCT är att man tagit bort ombyggnationen av tågvagn och lastbilschassi, som var en av CCTs stora svagheter, genom två hydrauliska ?teknikplattor?.

This work is about how teachers describe their work with mathematics in a traditional nursery school and a Montessori preschool. Another aim is to study how children mathematise on the two different preschools and to see if there are any differences between the various educational theories and practices mathematising. I have used two methods wich is interviews with preschool teachers, and observation of the children. The results of my study was that differences exist but the biggest difference is the material that Montessori uses. The difference between the teachers' way of teaching mathematics is to Montessori preschool places great emphasis on the material and how it is used, while in the traditional preschool puts the emphasis on learning through interaction with others.

This thesis describes teh solution of two problems regarding safety on powered lawnmowers; protectning the users from injury when using the lawnmower in slopes, and when cleaning the cutting blade.The task was carried out through initial studies on a representative lawnmower. A generation of ideas followed with an evaluation to select the best solution. The winning concept was further developed to reach acceptable performance. The word resulted in a functioning prototype utilising an original way of detecting inclinations without incorrect signals. It c an serve as a platform for further development into a product.The work gives insightful experience of solving real-world problems, and especially to deal with situations where several variables and their effects are unknownPlease note that several parts of the work are confidential, and have therefore been removed from the thesis..

A philanthropist needs long arms- An investigation on how to illustrate difficult wordsThe feeling of not understanding all the words that I read made me initiate the project of investigating the capacity of drawn images to increase the understanding of difficult words. I?ve been working with my own personal understanding and skills in illustration.My aim was to reflect on the function, composition and manner of my illustrations. I wanted the images to be clear enough to explain and function as a help for memorizing the words but also open enough to give them a new dimension. One of my conclutions is that my way of changing the original shape of a body in my drawings, by giving it new functions such as longer arms, helps me to explain the words clearer and deeper.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

As a hibernating species, the brown bear spend most of the winter months in a den as astrategy to avoid unfavorable conditions. The denning period is a vulnerable time for bears,making them unable to flee disturbances without losing valuable amounts of energy. Brownbears' wariness of humans and avoidance of anthropogenic disturbance often steer denningbears away from human infrastructure, and bears thereby avoid possible disturbance and itsassociated energetic costs. This study was carried out to test the hypothesis that bearsdenning closer to infrastructure select more covered den sites to compensate for the closedistance. Dens from 32 individuals were visited and analyzed in terms of sighting distance(a measurement for den horizontal cover) and habitat ruggedness, in relation to distances toinfrastructure.

Half of Sweden?s 140 000-150 000 sows are culled and replaced by 75 000 gilts annually. Culling of old sows is necessary and allows new breeding material to enter the herd. However, many of the culled sows are young, and have not yet become profitable at the time for culling. Therefore, it is an important question for the pig industry, how to raise gilts to sows with a high and sustainable production level.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

In the last couple of decades, corporate law firms have rapidly grown to become both influential and highly profitable corporations in the business world. Today, the largest law firms are assumed to bear far greater resemblance to large and often multinational public limited companies than the small businesses generally associated with legal services. However, one interesting specific set them apart from the majority of other companies; the partnership and its interrelated profit sharing. The aim of this study has therefore been to investigate partner compensation systems in corporate law firms and further examine what implications chosen compensation systems have on the organizations. Using a multiple case study, including 7 of Scandinavia?s largest and most well known law firms, the results show that partner compensation systems are highly individual and the critical question is whether to employ seniority based or performance based compensation systems.