This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

Today?s climate changes will probably give rise to precipitation in Sweden, which will cause more floods in Swedish rivers. Many of the Swedish rivers are regulated and have lots of hydro-electro power plants. Higher floods in the rivers will give greater water loads on the dams, which mean that a higher discharge through the sluice gates and in the spillway channels is needed. High discharge of water in a spillway channel can create scour of the material in the channel.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

This report is a study of Swedish traditional ships and their safety organization. The focus is on how the non-profit organizations that operate the traditional ships can adapt to current regulations in the best way. Initially a background on traditional ships, their organization and regulations that regulates them will be presented.The study is focused on which parts that can be more important in the safety organizations for traditional ships. The questions also includes if a non-profit organization might affect the safety and how the role as designated person should be handled in these organizations. Furthermore the study addresses how a non-profit organization that operates traditional ships might improve their safety organization.The information is gathered by interviews with persons that work with safety, controls safety organizations or is active in organizations that operate traditional ships.

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

Today, the catering personnel are an essential part of the safety organization on board Swedish passenger vessels in ferry services. Their responsibilities for the safety on board have increased in connection with the changes in regulations made on the shipping industry. These changes have been mostly related to human factors and structural leadership in the last 25 years.A well-functioning safety organization requires competence and commitment from every individual. Previous researches on Swedish passenger ferries concerning the safety organization have raised issues regarding the catering personnel?s perception of the safety on board.

Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.

In April 2007 we contacted Lennart Augustsson at Designpartners AB in Västerås. He came up with the idea to investigate and evaluate their construction of a interaction beam, CSB-beam. CSB is short for Connector Interaction beam. The beam is based on a horizontal C-profile of high-tensile steel and in the bottom of the profile are vertical flat bar welded so called block connectors. These block anchorsare also made of hightensilesteel.

Background:In Sweden there are several thousand surgical procedures performed every day. The treatment is expected to be efficient, profitable and safe. Despite that, complications occur in 3-16 % of the surgical procedures. To prevent this, WHO has developed a surgical safety checklist containing safety issues to give the surgery team an opportunity to a last control that everything has been properly done. The profession of the surgical nurse focuses mainly on patient safety especially regarding hygiene and sterility.Aim: The aim of the study was to investigate and describe the perceptions of the perioperative nurses regarding WHO: s surgical safety checklist.Method:To test the suitability of the method a pilot study was performed where tree operating room nurses were interviewed and the data was analyzed using qualitative content analysis.Results: Four categories emerged; Increased patient safety, enhanced team spirit, good planning, stronger professional role.Discussion: The result from the study showed positive perceptions regarding the surgical safety checklist, a fact known from earlier research.Conclusion: The results of the pilot study showed that surgical nurses had good support in their work when the surgical safety checklist was used..

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

During the latter half of the 18th century, when concrete started seeing general use in modern cities, the use of different methods to give the concrete a finished surface texture saw use. One of these was using different methods of mechanically altering the surface using a slew of cutting and crushing techniques with mallet and chisel. This was done in order to hide the often dull and gray look of concrete, and allude to other more expensive and luxurious stones. The work would possibly have been done by experienced stonemasons, using much of the same techniques and tools they would have used while working natural stones. Or did they? This essay explores, through the use of traditional handcrafts and tools, the claim that the working of concrete surfaces can be done with the same tools and skillset as the working of natural stone.