In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

This report deals with the modeling of a part of the communication system based on the IEEE 802.11a standard which represents the next generation of wireless LAN with greater scalability, better interference immunity and significantly higher speed, up to 54 Mbps. 802.11a uses Orthogonal Frequency Division Multiplexing (OFDM) where modulation is performed by an IFFT and the demodulation by an FFT. After modeling the FFT in Matlab and C, the FFT implementation has been validated using a soft microprocessor core by Xilinx (Microblaze) and the results were compared..

Aim: To investigate if physical exercise in combination with coaching will reduce pain and improve knee function in patients with mild to moderate osteoarthritis in the knee compared to physical exercise alone.Method: The study consisted of 42 patients who were randomized to either an intervention group or a control group. Both groups followed a standardized training program at home, but the intervention group received additional support with regard to the aim of their training, as well as extra coaching during the training period of ten weeks. A Visual Analog Scale (VAS) was used to evaluate the patients? pain. A 10 metre walking test, the Index of Muscle Function (IMF) and the Knee injury and Osteoarthritis Outcome Score (KOOS) were also used to evaluate knee function.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

Städer som saknar infrastruktur och som har en låg befolkningsdensitet tycks ha en betydligt lägre andel cyklister. När fler personer cyklar blir cykeln ett naturligare inslag i stadstrafiken, vilket bl.a. medför att städer med fler cyklister generellt sett är säkrare att cykla i. Andra städer skiljer sig från Stockholm beträffande befolkningsmängd, existerande infrastruktur för cyklister och hur stor andel av alla resor som sker med cykel. Att jämföra andra städer med Stockholm är ett problem på grund av dessa skillnader.

Rapporten beskriver ett utredningsuppdrag för Lantmännen Unibake, Korvbrödsbagarn, där lösningar för en automatiserad iläggning av påsar i kartonger skall ersätta den nuvarande manuella hanteringen.Metoden för att hitta en passande lösning genomfördes enligt PDCA-cykeln (Plan-Do-Check-Act), där fyra olika faser går igenom för att få en förståelse för nuläget och önskemål, utforska tillgängliga alternativ genom kontakt med agenter för maskinföretag, utvärdering av lösningsförslag och till sist en slutsats och förslag till fortsatt arbete..

The harness racing industry has roots hundreds of years back in time and breeders through time have changed the horses to a mix of potential, harmony and speed. Breeding has changed the conditions and created a horse that perform better and better. A risk with high-performance horses is that injuries related to training and racing may occur more often. In training and racing situations, lameness is the most common injury. There are many factors affecting the occurrence of injuries and lameness of the trotter horses, such as how the horse is trained and raced, the surface condition of the racetrack, banking and angle of the curves of the racetrack and how fast injuries are discovered and treated.

To conclude this year?s introductory course in Mechatronics the students, in groups of 6,constructed a prototype based on the technical requirements established by the course teachers.This year they consisted of the following: two wheels only, active balancing, remote controlledand able to stop when crossing a pre-determined marker on the ground. The project lasted for 7weeks and the result is a working prototype and this report.The report reviews the chosen solution, subsystems and the finished prototype as well assuggestions for improvements, discussion and analysis.The prototype constructed embodied most of the group?s earlier individual technical specialtiesand consists of the following: a flywheel for balancing, ultrasound for angle measurement, areflective photomicrosensor to detect the marker and Bluetooth for the hand control..

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

Ett syfte med tidserieteori är att dekomponera en observerad tidsserie i en summa icke observerbara komponenter. Dessa komponenter är Trend, Cykel, Säsong, Kalendereffekter, Extremvärden samt Irreguljära effekter.Det finns två olika teorier för dekomponering av tidsserier, modellbaserad dekomponering och icke modellbaserad dekomponering. De två olika teorierna skiljer sig åt i grunden. Den här uppsatsen syftar till att utvärdera de två säsongsrensningsmetoderna TRAMO/SEATS och X-12 ARIMA samt att säsongsrensa tidsserien över den totala lönesumman, vilken är en del av statistikprodukten Lönesummor arbetsgivaravgifter och preliminär A-skatt (LAPS) producerad av SCB..

Den rättvisa i staden är en utopi, något som alltid bör eftersträvas och prioriteras vid stadsplanering. Genom att analysera staden och dess utveckling utifrån stadskvalitéerna demokrati, mångfald och rättvis fördelning så kommer också de beslut som tas få mer rättvisa utfall. Örebro stadskärna har sedan 70-talet och framåt behandlats som två skilda områden, norr- och södercity. Detta har under åren förstärkts och majoriteten av resurserna har lagts på södercity, stadens handelscentrum. Nu pågår ett utvecklingsarbete där Örebro kommun tillsammans med fastighetsägarna vill utveckla norrcity till en mer attraktiv stadsdel som kan komplettera södercity.

During the spring of 2013 we developed a visual identity for Jönköping Bandy, a bandy association in Jönköping, which was founded in 1947.Jönköping Bandy?s main problem was the low interest for the association by the local people. The association also had problems with the economy, which made it hard for them to merchandise themselves.In Jönköping, there were a lot of sport associations, and therefore, it was difficult to find sponsors. One way to help the association, was to create a good visual identity for them. A visual identity that would reflect on the proper values of the association.The intention was: ?Through graphical design, we want to convey Jönköping Bandy to a larger amount of people, and get increased knowledge in graphical idiom.? and was torn apart into these three questions:What core values does Jönköping Bandy have, and how can we convey them through the visual identity?Which visual materials does Jönköping Bandy need?How do other teams in Allsvenskan Södra merchandise themselves through their websites?The work began with a study of relevant theoretical literature, with focus on graphical design.

The Homogeneous Charge Compression Ignition (HCCI) engine is promising in terms of lowNOx, low particulates and high efficiency. Due to its homogeneous charge, where thecombustion starts almost simultaneously from a number of points in the combustion chamber,only lean mixtures are possible to burn because of the resulting rapid combustion, which is muchfaster than the combustion in an SI-engine or a diesel engine. When richer mixtures are used thecombustion will start earlier and also be more violent.To phase the combustion later and lower the combustion speed, external cooled EGR can beused. The EGR-system used in this thesis uses a divided exhaust channel where one channel andits corresponding valve are used only for transporting EGR back to the intake system.Consequently the EGR-valve is connected to the intake pressure. This system is called Direct-EGR (D-EGR).Engine tests verified that the CA50 indeed is phased later when cooled EGR is used.