Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

It?s not for nothing the time we live in is often referred to as the age of information. Children and young adults who grow up I today?s society have greater access to facts and opinions than any earlier generations. This also applies to popular culture that during the last couple of decades have taken new expressions that no one could have ever dreamed of and more time goes to the consumption of it via visits to the cinema, television and computers.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Menstruationscykelns inverkan på kvinnors preferenser för mäns ansiktenSammanfattningDetta är en systematisk replikation av Penton-Voaks och Perrets studie (1999) då en preferens hos kvinnor för maskuliniserade ansiktsdrag under hög befruktningsrisk i menstruationscykeln hittades. Dessa drag tros vara en ärlig signal för goda gener och immunokompetens hos män. Oklarhet råder huruvida detta gäller för olika populationer. 36 svenska universitetsstuderande kvinnor fick därför välja ut de mest fysiskt attraktiva ansiktena, utifrån maskuliniserade och feminiserade bildserier, vid hög respektive låg befruktningsrisk. Ingen signifikant skillnad hittades mellan de olika faserna.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

In the history of scientific visualization techniques there is a lack of social science practices and methodologies. The advent of modern computer graphics brought the use of visualizations into a whole new era, but even though the tools by which such modern visualizations are created become easier to access and use, the lack of social science researchers harvesting the benefits of such tools still remain. This ease of use, increase in power and accessibility plus the ever growing need within the natural sciences to augment the human senses has further complicated the relationship between scientific methodologies, validity, reliability and the use of visualization techniques. This relationship must be explored, demystified and understood in order to fully grasp the impact of visualization practices when incorporated into any given scientific method. Within the social sciences there is one example of a tradition that has since its conception carried within it a graphical notion and a visualization practice.

Dysfunction of the upper respiratory tract is a common cause of impaired performance and intolerance to exercise in racehorses and include several upper airway obstructions. The ones termed dynamic obstructions are primarily seen during physical exertion and affected horses often appear to be normal during endoscope examination at rest. The correlation between diagnoses made at rest respectively exercise is low, suggesting that an examination at rest alone is likely to be insufficient. The upper respiratory tract is exposed to great differences in pressure throughout the respiratory cycle; variations that are further altered during strenuous exercise and affect the rigidity of upper airway structures. In presence of great fluctuations in pressure, stability is achieved through coordinated and synchronous neuromuscular mechanisms. Due to nerve damage or anatomical abnormalities, these functions may be disrupted and further cause a dynamic collapse of the upper respiratory tract when pressure changes become too severe. The etiology behind the neuromuscular dysfunction is not yet fully understood.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

In the dairy production it is necessary to be able to sort cows. Dairy cows are sorted for many different reasons i.e. regrouping into production strings or for treatments i.e. inseminations, pregnancy and health checks, vaccinations or hoof trimmings. One labour saving way of conducting sorting is by using an automatic sort gate.

The aim of this masters thesis is to learn how an organization has solved its information management via intranet and document management. The purpose is to identify what different types of information are made available via an intranet, how this information is structured and what functions the intranet includes. Conventions, directions and advice about intranets and document management were studied, with the purpose to compare whether the systems of the company correlate with these. Other issues considered in the thesis, are how the employees of the organization use the intranet and how the document management is organized. To get an understanding of these questions the structure and functions of the intranet were studied empirically and a questionnaire on what the employees need and use, concerning the intranet, was sent out to 130 employees.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

In support to a decision to be made by the Swedish central competent authority on a minimal amount of straw for conventional growing-finishing pigs, a study using 168 pigs provided 7 different amounts of straw (20, 40, 60, 80, 100, 200 or 300 grams/pig/day) was performed. The straw was provided either once or four times per day. Detailed behaviour observations were made using focal animal sampling and continuous recording for one hour between 9 and 10 am and again between 3 and 4 pm. The data analysis is presented in three ways: broken stick model, polynomial trend line and logarithmic trend line. No method was suitable on its own but the use of all the methods simultaneously was found to portray the data in the best way.No significant differences were found when comparing pens provided with straw once or four times per day.