Non-contact anterior cruciate ligament (ACL) injuries is a serius and traumatic injury to the knee that is common in female soccer players and often force the player to quit or lower the level of activity because of lost stability in the knee or from fear to suffer  a new injury. Female soccerplayers have a higher risk than their male counterparts to get an ACL rupture and especially adolescent females have a high risk. The most common causes to a non-contact ACL rupture is side-Cutting manuvers and landing after jumping. Every other player with an ACL rupture develops osteoarthritis within 10-15 years from the time of injuryResults: The higher risk for females to incur a ACL rupture is due to smaller intercondylar notch, they?re in the follicular or ovulatory phase of their menstrual cycle, increased knee laxity, dominance in the quadriceps muscles, flexion in hip and valgus movement in the knee.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the Cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

Title: A study about conditions for leadership in knowledge-intensive firms.Authors: Cecilia Ekström and Niklas SandbergKeywords: Leadership, knowledge-intensive firm, hierarchies, followers.Background: Leadership is becoming one of our greatest social myths and is considered a total solution for many problems that occur in an organization. The view of leadership is usually from a top-down perspective, which contributes to an often underestimated view of the follower. Just as it is important to understand the leader's view of leadership, it is important to understand how employees view the structure from which the leader derives its legitimacy. The existing conditions in knowledge-intensive firms, such as autonomy, place special demands on the formal leadership.Purpose: The purpose of this study takes an employee perspective, to understand what the conditions are for formal leadership in knowledge-intensive firms.Method: A qualitative research method was used and empirical material was collected through interviews with employees in knowledge-intensive firms. The empirical material was analyzed by the respondents? mental images which were set against the theoretical framework of the thesis.Conclusions: The conditions for formal leadership in knowledge-intensive firms make it advantageous to have a leader with a withdrawn role.

Due to soft grounds in combination with seasonal variation in soil humidity, there is a lack of stands that are possible to cut during spring and autumn in some geographical regions. For Holmen Skog this sometimes means that a large proportion of the contracted private forest is cut during the winter when the ground is frozen. One consequence of this is that the proportion of winter stands in the stand bank of own forest increases while spring and autumn stands becomes a scarcity. This in combination with milder winters, especially when there is a long period of reduced bearing capacity in spring or autumn, means that the situation rapidly can become critical. The overall goal with this study was to generate basic data for decision support in the work to achieve a sustainable distribution between own forest and contracted private forest in the stand bank. The study took place at Holmen Skog, district of Umeå, during autumn 2007 and was based on interviews and an analysis of harvest planning and delivery data. The study showed that there is a problem with how the Cutting is distributed between own and contracted private forest during the year and that it foremost is the proportion of winter thinning of own forest that has increased in the stand bank.

The purpose is to illustrate the phenomenon of self-harm from a social psychological and sociological perspective. The purpose is furthermore to examine the role social relationships play in the individuals´ self- imagine and what role does identification play for anyone who harm themselves? We want to examine in what way social relationships are important and how they function for individuals who harm themselves, both once they have started to harm themselves, and if the relationships in any part caused the Cutting to begin with.Questions:How do individuals shape their identity based on self- harm? Which self-image do individuals have who self-harm? Is there anything in the person's previous social relationships that have caused them to begin to hurt themselves?Method:In this paper we have analyzed five autobiographies. We have used open coding from grounded theory as analytical method and subject positions based on discourse analysis.Theory:We have used the Cooley concepts looking glass self, Foucault's theory of power, Giddens' concept of ontological security and existential anxiety.Results and Analysis:We found six different categories that we thought were central. These were negative self-image, guilt, lack of family support, negative experiences of others' views, the protective identity as self- harmer and insecure social relationships in school.Conclusion:The self-harming is a very complex behavior.

During the summer of 2007 I was employed by Högestad Christinehofs Förvaltning AB. My main task was to make an inventory of giant trees at the estate. Högestad and Christinehof,which with their total possession of 13 000 ha of land is the biggest estate in Scania. A giant tree is a tree with a diameter in breast height more then 1 meter. Trees of these dimensions are registered by Swedish authorities. Landowners with a giant tree on their property can receive a subsidy for Cutting trees that are in competition with the giant tree.(Levenskog, 2007) Giant trees are important for biodiversity in the landscape and there are important habitats for different insects, birds, bats, lichens and funguses.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of Cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is reinforcement of poor subgrade by usinggeogrid soil reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.

Research and innovation are areas that have been evolving quickly during recent years. However, it has been difficult for individual countries to make progress on their own. To solve this problem the European union have launched the most expensive research and innovation program to this day. By combining national governments throughout Europe, the EU wants to create Cutting edge technology that will strenghten the region and make the union able to compete on a worldwide stage. However, trying to combine national governments has not been easy, the programs struggle with byrocracy and member states of the European union are tentative about supranational institutions. By engaging in the program national governments have been afraid of how this will affect their sovereignty.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and Cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The Swedish healthcare systems have over the past decades experienced a major reorganization that involves reduction of costs and cuts due to the financial problems that the public health system faced. Healthcare was criticized because it was considered to be bureaucratic and inefficient (Funck, 2007). The solution to this problem was to focus on other measures rather than the economic measures, such as modernizing the healthcare instead of Cutting down. Implementing a balanced scorecard in a public sector as a hospital, perceived as failures. This is due to several factors such as communication, knowledge and expected time are not taken into consideration when implementing the scorecard.

Background and aim: The number of refugees and unaccompanied children are increasing in Sweden and these people belong to one of the groups that are at higher risk for developing suicidal behavior. At the same time the lack of research on the subject is mentioned several times by different sources. The aim of this study is therefore to investigate suicidal behavior among young refugees between the ages 13 to 18 years in Sweden, from personnel experiences in social services.Method: We have chosen a qualitative approach with seven narrative interviews that each lasted for about one hour and were recorded. The interview guide was semi structured. The respondents in this study consist of one student counselor, workers from two child psychiatry departments and four different residential care homes for unaccompanied children and young persons.Results and conclusions: The respondents had the understanding that young refugees have been through a lot, lost their families and experienced difficult traumas and a tough refuge.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity Cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel Cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.