Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.

Arbetet är ett samarbete med företaget Gisip AB. Företaget sysslar med värmesystem med fokus på mikrovågsteknik. De vill ha ett verktyg för att kunna simulera sinverksamhet och tillverkning. Detta arbete syftar till att utvärdera användbarheten av ljussättningstekniken fotonmappning som grund för att simulera mikrovågor. För att skala ned systemet valdes spridningen av mikrovågor som fokus för arbetet.En applikation implementerades som genererar texturer för att visa spridningen av systemet.

Social media, such as Facebook, Instagram and Twitter, have become popular platforms for social communication, and, increasingly, also important channels for business marketing. For a business intending to use social media for marketing, however, developing a strategy and building a trademark can be a challenge. This report describes how a small, newly established business enterprise can develop a digital strategy with clear goals and practical guidelines. The report describes a digital strategy for Gelato Scarfó and shows how this strategy is made concrete through a set of guidelines. The guidelines develop a trademark for identification and loyalty, and give advice on how new materials can be made consistent with the trademark..

During late autumn/winter in the years of 2005/2006 and 2006/2007 a questionnaire study was made in Västra Götaland county in the south west of Sweden. Inspectors responsible of animal welfare answered the questionnaires during their routine visits to different horse stables in the county. The questionnaires contained questions about the number of horses at the farm, hoof condition, body condition, how often the horses were fed outside and the pasture condition. The purpose of this study was to investigate if a connection could be seen between environmental factors and health factors within the horses in this material. The connections that were analysed were between; hoof health and pasture condition, how many times the horses were fed outside and the body condition and between the number of horses in the pasture and pasture condition.

A degree thesis about quality control and assurance in construction. Made in cooperation with Wästbygg. An analysis was made of the self-monitoring control that is conducted during the construction. The data was collected from interviews from personnel employed by Wäsbygg as either work-leader, project-manager or quality- and environmental-coordinator. During the study there was also a review of the literature in the subject.

The purpose of this report is to investigate teachers views of whether pupils with Asperger Syndrome, autistic symptoms or ADHD shall go in ordinary classes or special groups. The study tells you about what difficulties these pupils often have, what adjustments they need in their schoolsituation and the positive and negative effects of joining a special group.A teacher for special needs, two teachers in special groups and two teachers in ordinary classes have been intervjued and earlier made researches have been studied.The conclusions of this study are that the decision of whether a pupil shall go in a normal class or a special group must be made individually. Most pupils who are capable to profit from the training in a normal class and pass their examination, shall go in a normal class. The greater part of the recommended adjustments are possible to do in a normal class. But it requires more resourses and teachers with better knowledges about theese handicaps..

This report describes the bachelor degree project called ?A case study in strategic product design in collaboration with Elfa? carried out by Mathieu Gustafsson and Pär Rickberg,students at Carl Malmsten Furniture Studies.We had the opportunity to do our degree project in collaboration with ELFA after a previous school project where we made suggestions for new products. Initially the brief was to develop new products for the company which was based on previous proposals.Reasoning led us in to design strategies and how to use such a strategy to develop newproducts for ELFA. During our first superficial analysis of ELFA and its current products, we found that we wanted to recast the framework of identity and context in which the product would be created. According to the researches made by SVID (The Swedish Industrial Design Foundation),companies that continually are working with design strategies strengthens the brand, its competitiveness and become more innovative.

Behovet att mäta kvalitet hos olika produkter ledde till framställningen av ett antal mätningsmetoder. Redan vid olika stadier av tillverkning kan man avgöra om produkten motsvarar en viss förutbestämd standard. Den här rapporten kommer att undersöka vilka eventuella problem mätning av kvalitet med laser har i industrimiljö. En konceptuell modell över hur mätning av dornprofiler kan genomföras kommer att presenteras med fokus på att väga tidsåtgång mot exakthet för att skapa en balans som är acceptabel för företagets krav. En beslutsfattande algoritm kommer även att presenteras där ett avgörande ska ske om mätresultaten är rimliga eller beror på fel i mätutrustningen.

This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

The aim of this study was to describe and understand parents? perspectives in aid assessment for children according to The Swedish Act (1993:387) concerning Support and Service for Persons with Certain Functional Impairments (Lag 1993:387 om stöd och service till vissa funktionshindrade, LSS). The study took place in the county of Kronoberg, Sweden, and was based on a total of nine qualitative interviews. Four interviews were made with parents? of children who has interventions according to LSS (1993:387) and five interviews were made with LSS case workers. In our study we saw that parents? perspectives often is the largest amount of information that case workers take into account when assessing aid and as a case worker you listen to the parents perspectives to capture the child?s and the family?s needs. It also came clear that the parents? perspective is not only about the child?s needs, but also includes the parent?s own needs and their family?s needs. The parents in the study felt that they made the decision about the choice of aid and considered themselves as the one who decides the family?s requirements. It turned out that treatment and understanding from the case workers was important for gaining access to the best help and making parents feel listened to. Parental responsibility was of great importance for the assessment, and it often led to disagreement between parents and case workers. During the study, we saw that power existed in the relationship between case workers and parents, but that it could be moved and changed during the time of aid assessment..

This study in the subject of forest planning is made for Sveaskog and its aim is to develop tools that prognosticate outcome in terms of volumes per sort from not yet cut forest stands. The degree of detail is just to get reliable results for at least one months volumes, for Sveaskogs own forestland in the market region of Norrbotten that is about 100 000 m3fub. The course of action to accomplish this is regression analysis and the data consists of cut tracts on own forestland in Norrbotten during the years 2006, 2007 and 2008. That is a little more than 4 million m3fub. Two tools were made.