This report deals with hard surfaces and the factors which are behind the criteria for dimensioning, also dependent on the level, or volume, of traffic. A test was made on slabs of two kinds of natural stone. This was made to see if the values that were reached for breakload was transferable to the same tables that the concrete industry is using for surface dimensions of slabs and paving stones. The test showed very high values and the result, together with the written study, led to the author?s suggestion for a classification table where slabs of natural stone were divided in to different classes depending on traffic, thickness and durability..

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

In this paper the authors aim to examine the effects on consumers using different strategies in a campaign within social marketing. A model by Evans et al (1996) has been used in order to see the different steps in which advertising catches the viewers? attention and eventually leads to action or purchasing. However, in the case of this thesis, the intention of the chosen campaign is to change the consumers? attitudes and behavior towards alcohol.

The Energy Performance Certification in Sweden was developed as a tool to achieve the Government's target to reduce Sweden's energy consumption by 20 percent by 2020. The Energy Performance Certificate has previously received some criticism for not fulfilling its purpose. Questions that formed the basis for this report is how the energy performance certification provides support to buyers of single-family houses and if the energy performance improved in terms of reliability. The report begins with a background description that describes how the energy declaration works and some of the findings of previous evaluations and surveys. A survey to investigate the broker's position to energy performance have been conducted as well as interviews with buyers and sellers of houses. An investigation whether the energy performance can vary between different calculation programs, depending on various assumptions made by the energy declarant, has been made.Brokers and sellers have proved negative attitudes towards energy performance, particularly brokers.

In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.

Denna rapport är ett examensarbete utfört av Patric Crafoord, student vid fakulteten för hälsa, teknik- och naturvetenskap på Karlstads Universitet. Arbetet omfattar 22,5 högskolepoäng och är den avslutande delen på Högskoleingenjörsprogrammet i Maskinteknik.Examensarbetet har utförts på Arvika Smide AB vars uppdrag gick ut på att systematiskt kunna minska den totala verktygskostnaden och att säkra en given kvalitetsnivå.Saker som behandlats i rapporten är flytt av verktygsavdelningen som kan spara 1-1,2 miljoner kronor om året samt förkorta tidsåtgången för tillverkning av verktyget med 4-12 dagar, prioriteringsordning av verktygsproblem vilket resulterade i en 32 % minskning av verktygsproblemen i pressgrupp 4 men en ökning med 52 % i pressgrupp 5 och möjligheten att använda statistisk processtyrning i smidesprocessen samt beräkning av processens duglighet som visar sig vara god.Med i rapporten finns också en teoretisk del som beskriver sänksmide och excenterpressen som används på Arvika Smide AB..

This work has been made in cooperation with the municipality of Eslöv and the inventory area is a part of the deepening of the municipality plan of east Eslöv. The aim of the work is to test the principle of balance in the overall planning. Later in the detailed planning process a more detailed calculation is made and a suggestion of suitable measures for compensation is made. Then the method with green area factors can be used. The goal is to balance the negative influence on the environment from the planned impacts to gain a sustainable development of the city. The principle of balance means that the one responsible for the development also has to compensate for the negative impacts on nature and landscape that comes with the development.

LKAB deltar i ett forskningsprojekt som går under namnet ULCOS (Ultra Low CO2 Steelmaking), där det övergripande målet är att minska koldioxidutsläppen med 50% vid stålframställningen. Inom ULCOS innebär ett av delprojekten att chargera delvis reducerad pellets (LRI, Less Reduced Iron) i masugnen. LRI är en produkt som är delvis reducerad till en metalliseringsgrad på ca 65%. I denna studie används nio olika typer av pellets för LRI framställning. Dessa är KPBO, KPRS, MPBO, KPBA, HYL samt fyra nya pelletprodukter som framställs från filtrerad KPC slig i pot furnace anläggningen vid CK-laboratoriet i Malmberget.

The objective of this thesis was to get more knowledge before an alternation of generations. In theses I have chose to make two drawings, one for dairy cows and one for cattle rearing. The drawings are made for a future alternation of generations at my parental home in the province Dalarna. The results are made out of educational visits at different farms and literature investigations. Those dairy farms who I visited had different milking system at each farm and the cattle farm I visited had beef production. The farms are placed in the middle and south of Sweden. At 1998 the Swedish Board of Agriculture decided to change the stall breadth and stall length and the result of this is that many farmers had to rebuild their cattle- and dairy buildings or end farming..

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

This study focuses on why people not longer want to be a part of a religious communion they have earlier been a part of. To examine this I have made seven interviews with people who have left their previous communions. Together with the methodological and theoretical discussions on discourse analysis, Richard Jenkins discussions on identity and theories concerning the post-modern society, I have made an analysis on how these people consider their previous communions and its members. They refer i.e. to the social control, the ?closed? culture and the non-questioning-culture that constitute the communions and its techniques.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

The purpose of this study has been to examine whether the bottom fauna of the stream Stensjöån, has been negatively influenced since the harvesting of peat began on the nearby peat moss Skäftesmyr or not. Comparison has been made with the results of index calculations from earlier examinations in the stream, two calculated indexes has been made, Danish fauna index and ASPT-index. The sampling was made with the kick sampling method, SS-EN 27 828. Three locations were chosen for the examination, one upstream from the peat moss, one just downstream from where the brook from the peat moss joins Stensjöån and a third location near the outlet of the stream to the lake Stensjön. The samples were sorted and the found animals identified to the taxonomic level required for the calculation of the two indexes.

The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

Shortselling and loan of shares are becoming a common complement to"traditional"trade in shares. To be able to lend shares, it is necessary to reregister the shares so that the shortseller is competent to sell these shares further. In a legal sense, the proprietorship of the shares has changed hands, though it is not obvious for those involved to see what happens to the prorietorship. The obscurity is principally whether a complete changeover of the proprietorship is made between those concerned. This essay makes clear which legal consequences loan of shares and shortselling get concerning the proprietorship, and how a conflict between the lender and the third party should be solved if the shortseller becomes bankrupt.