This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

The thesis aims to describe the current sales climate in the context of complex sales in business-to-business. The purpose is to increase the clients knowledge of sales and test the clients hypothesis that the sales climate is changing from Solution Selling to Insight Selling, further the thesis aims to contribute to the scientific debate of sales. Solution Selling is characterized, as the name suggest, by selling of solution to the customers needs. With Insight Selling the seller has a provocative approach towards the customer and the seller is searching for customers in the need of change. This is a qualitative study conducted with eight interviews and one focus group.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Introduction: We are facing an aging population, which means that the incidence of age related diseases, such as Alzheimer's disease, are expected to increase. In the current situation there is no cure for the disease, whereupon it is important to develop preventive strategies. Objective: To examine the association between Alzheimer's disease and physical activity. Method: A systematic literature search was done to identify the current state of knowledge from the year 2006 onwards. The reason for this limitation was that the SBU commissioned a systematic literature review in 2006, where the relationship between physical activity and Alzheimer's disease could not be determined.

This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

This report describes necessary steps for an implementation of an environmental managementsystem at a secondary school and what would hopefully lead to an environmentalcertification, using ISO14001 ? or as a possibility ? one of the so called environmentalawards. To the largest part, the descriptions and activities are general and can be used at anysecondary school at all, but the current status analysis ? with the started environmentalinvestigation ? and the environmental policy are directly coupled to Wilhelm HaglundsGymnasium. The document should work as a process support for implementation of anenvironmental management system at a secondary school..

It?s not a new occurrence that girls have higher grades than boys. Statistics show the same at the Kallinge school in Ronneby. There is a great difference between boys and girls in their grades from the ninth class. There are many different factors that affect the pupils.

The main point in this diploma work lies to a beginning on analysis of the existingmodel of WoodEye scanner. The analysis aims to forming a view and understanding ofhow the scanner is designed and how it functions, and certain conditions around thescanner. On the basis of the result from the analysis and obvious criteria, has a numberconcept proposals been put forward. The concept proposals has then been evaluated andbeen compared with current concept, obvious criteria and compared to each other. Thebest proposal has then been developed far to a completed concept..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

In this thesis, a case study of Kungens Kurva in Stockholm is made. The municipality of Huddinge has designated the area, which is an external shopping-center, as one of its key development areas in the future. The municipality has established a future vision for the area, which extends until 2030. The vision claims, inter alia, that Kungens Kurva along with Skärholmen will become a vibrant suburb. How well the values and aims of the vision are met in the current area situation is discussed in the case study by a number of analysis that carries out the existing structures and characters of the area.

Recent changes in Swedish law suggest new groups of ?desired? labor migrants, which international students is an example of. Despite this, international students in Sweden have received little previous attention in the literature. The current study focused on international master students? experiences of job searching in Sweden and challenges they face in job searching, recruitment, and workplaces.

Most of the sea areas within the European Union are overfished and the catches are estimated to be up to five times lager then the amount to achieve a sustainable fishery. In doing so, the management of EU's marine resources comes to be questioned. The purpose of this study was to analyze EU's administration of marine fisheries and to explore which steps that can be undertaken to counteract the negative trend. The questions of the study were: How does the EU administrate today?s marine fishery recourses? And: How can the problem whit overfishing be discouraged? To answer these questions a comparative analyses were used to compare and evaluate administrative systems.