Sökresultat:
2536 Uppsatser om Current measuring - Sida 10 av 170
En jämförande studie mellan kreatininkoncentration i serum och GFR mätt med scintigrafi hos hund med misstänkt kronisk njursjukdom
Both serum creatinine and measuring GFR can be used to evaluate renal function in dogs suspected to have chronic kidney disease (CKD). Although high creatinine levels usually indicate renal disease, normal creatinine levels can be present in dogs with decreased renal filtration. Measuring GFR is generally believed to be the most accurate way of detecting decreased renal filtration and scintigraphy GFR using 99mTc-DTPA has been found to correlate well with the ?gold standard? inulin clearance method.When measuring GFR by scintigraphy, 99mTc-DTPA is injected intravenously and radioactive decay of technetium gives rise to gamma radiation, which is registered by a gamma camera. Pictures and curves of radioactivity in the kidneys are generated by means of a computer program.
En studie om konflikter i arbetslivet och det systematiska arbetsmiljöarbetets roll som verktyg till förebyggande arbete.
Abstract The main subject of this essay is conflicts at work and the effect it has on the employee´s health. I can through various reports read that bad health at workplaces is too high and that conflicts are a reason. What can be done to the work environment so it will be better from a psychosocial perspective? Sweden has a regulation that makes the employer responsible to work for an improvement in the work environment; can these regulations be used in purpose to reduce conflicts?My first question concerns the possibility to establish preventive procedures in the workplace systematic work regarding to improve the work environment. My second question is about the obligations of the employer to attempt to reduce conflicts at the workplace and the third question regards the documenting and monitoring of conflicts and the preventing work to reduce them. The purpose of this essay is to clarify how conflict preventive work can be included in the Systematic work environment management.
Dimensionering av bärverk av stål : En jämförelse mellan Eurokod och BKR
The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.
Design och konstruktion av mätuppställning för induktiv mätning av magnetisk spinndynamik
Development in spin dynamic occurs in the whole world because of therising demands on fast electronic storage for example hard drivesand RAM (Random Access Memory). Measuring the spin resonance of amaterial gives you the insight of the theoretical speed for amagnetic memory. This means the maximum storage speed is below thefirst resonance. All magnetic materials have different propertiesthat will inflict the resonance frequency which brings that theconstructors of memories need to know which magnetic material theywill use to obtain best results. In the market for normal users themaximum storage speed in a RAM memory is 1.6 GHz.
Evaluation of Different Extraction- and Analysis Methods for Calprotectin in Feces
Background Calprotectin is a protein expressed in the cytoplasm inside the neutrophile granulocytes. During inflammatory bowel disease (IBD), the neutrophile granulocytes are involved in a complex interaction at the inflammatory area where they die and release their content into the intestinal lumen. Therefore, calprotectin in stool is a suitable marker for diagnosis and measurement of the disease-activity in patients with IBD. The most commonly used method to detect calprotectin in stool is ELISA, but the process of manual preparation of stool samples is time-consuming.Aim The objective of the study was to evaluate an extraction method that could replace manual preparation of fecal samples and to compare different methods for measuring Calprotectin in stool using two ELISA-methods from two manufacturers and one rapidtest.Methods For extraction of calprotectin from stool samples we used sample collector tubes from Epitope Diagnostics and fecal preparation kits from Roche. Two different ELISA-kits for measuring calprotectin concentration in stool were compared.
Metodjämförelse mellan instrumenten Vitros 5,1 FS och QuikRead CRP för analysen P-CRP
In studies of serum, in the early 1930s, from patients with pneumonia, a factor was found. It could agglutinate certain pneumococcal species. This factor, which later became known as C-reactive protein (CRP), increased sharply during the early and middle stages of the disease. CRP was identified as an acute phase protein and found especially in bacterial infections. CRP is synthesized in the liver by stimulation of interleukin 6 (IL-6), which is produced by the monocytes, and consists of five non-covalently bound subunits.The aim of this study was to compare two different analytical instruments (Vitros 5.1 FS Ortho-Clinical Diagnostics and QuikRead CRP Orion Diagnostica) for CRP analysis.
Design av försöksanläggning för trycksatt rökgasrening vid oxy-fuelförbränning
Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.
Höghöjdsanpassning av BvS10 : Konceptstudie för optimering av överladdningssystem
This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.
New public management från solidaritet till effektivitet
The public service within health and care has changed remarkably during the last 30 years. It has been inspired by management ideas from profit-making businesses. Those thoughts are an umbrella term called Nex public management. In what way has New public management influenced the public service in Sweden? Important concepts in the change of public service are quality, effektivity and goals.
Värmepumpars inverkan på elkvaliten
Modern technology and fast development of heat pumps, the hunt for savings in energy consumption and the strive for environmentally friendly energy sources, convenience, and financial profit, have made heat pumps a reasonable alternative for the heating of houses.When the heat pump starts it will consume a considerable amount of current, which may result in a short-lived voltage-drop if the power grid is weak compared to the start-up current.The company Fortum Distribution which owns and administrates electrical network is interested in an investigation that deals with heat pumps affect on the quality of electricity.The purpose of this investigation is to study fast electrical fluctuations (flicker) as a result of start-up currents for single as well as multiple heat pumps on the same electrical station and from this evaluate whether there will be any problems installing heat pumps..
Design av Digital Multimeter-modul för inbyggt testsystem
The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.
Deep Green i oceana strömmar - en konceptstudie
With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.
Bestämning av vattenytor med hjälp av Nätverks-RTK och totalstation : Inmätning av Karlbergsån i Grums kommun
This report is presenting an approach that can be used to measure water surfaces in difficult conditions caused by dense vegetation and lack of nearby known points. The objective was to make a contribution to necessary measures for adaptation against floods in Grums Municipality along the stream Karlbergsån, which may occur when persistent rain raises the level of the stream. Along the river there are low-lying areas prone to flooding. According to Grums Municipality, the stream may widen where the water level differences are large, to create a better flow path and to counteract flooding. Grums Municipality was also interested in survey stormwater discharges which may affect the water level in the stream.
Fälttest av en ny metod att med objektiva mätmetoder karaktärisera egenskaperna hos ridunderlag- en pilotstudie. :
Background
Research concerning footing and its contribution to injuries has been conducted primarily in racing Thoroughbreds. Studies in UK and Japan indicate that some specific factors could be responsible for an increase in performance-associated injuries. Researchers in Sweden have performed studies on Standardbred trotters. More research is needed to be done on equestrian sports since requirements on footing are not exactly the same in riding and trotting horses.
The lack of scientific evidence on the construction of equestrian surfaces has lead to anecdotal validation of designs.
Produktionsanalys på Efterbehandling
Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.