The purpose of this master thesis has been to explore how Skanska Installation can be organized and managed from a Feedback of experience perspective, and define how an IT solution for knowledge management can be designed by identifying the company's current needs in communications, structural capital and information management.The study follows a deductive approach with a qualitative starting point. Using the literature  studies  the theoretical references were built, which is of great importance when using  a deductive approach.Furthermore the report is based on a case study on two different projects: Herrgården and Nattsländan. With the collected empirical data from the case  study the analysis was carried out with the theoretical framework as a basis. This finally led to the conclusions of the study.The purpose of a communications plan is to show how the communication between employees must be managed to best move the project forward. Emphasis is placed on the formal and informal communication of the company.

This bachelor thesis aims to analyse the Swedish mortgage market and investigate whether it is in a current price bubble or not. Comparisons have been made with Denmark, a country with a market similar to Sweden?s, and where the mortgage market faced a price bubble that crashed in 2008. The housing market in Stockholm has been analysed as a separate market, as it differs from Sweden as a whole in prices and underlying factors to increased prices. The conclusion of this thesis is that not Sweden, nor Stockholm, is currently in a price bubble at the mortgage market.

The current planning philosophy is based on a political utopic modernism founded during the first part of the 20th century. The focus is, in planning a defined area, to maximize the internal efficiency and to create a competitivesociety. During the latter part of the former century globalization changed the context, thus creating the need for a new way of approaching physical planning. This paper shows that the historical and philosophicalmetaphor of flow can be applied to meet the demands in the global city. It also shows how the edge, as where interaction takes place, is an important part of the content that has to be defined.

Syftet med den här magisteruppsatsen är att få en bild av hur skolledare och lärare ser på kommunikationsformen medarbetarsamtalet, kopplat till skolutveckling, i den svenska gymnasieskolan. Uppsatsen följer en fenomenologisk forskningsansats, i vilken en etnografisk modell med åtta kvalitativa intervjuer av tre skolledare och fem lärare på två gymnasieskolor setts som en fallstudie. Materialet har analyserats med hjälp av en narrativ metod och kritisk diskursanalys (CDA) och resultatet visar att skolledare och lärare talar om skolutveckling på disparata sätt i medarbetarsamtalet men också att förberedelser och feedback på medarbetarsamtalet skiljer sig åt och upplevelsen av medarbetarsamtalet är därför att det inte påverkar skolutvecklingen på de två gymnasieskolorna..

denna studie undersöks hur ledare arbetar med medarbetarsamtal för att utvecklamedarbetare och organisationer. Studien har genomförts med utgångspunkt i ledarnasuppfattning om hur de använder medarbetarsamtalet som ett hjälpande verktyg för att få greppom hur medarbetare och organisationen kan arbeta mot samma mål och utveckling. För att tareda på vår fråga har vi använt oss av en kvalitativ undersökningsmetod medsemistrukturerade interjvuer. Vi har pratat med 7 olika ledare som arbetar på två olikaorganisationer. I vår studie har de tillfrågade varit positiva och ansett att medarbetarsamtal ärett viktigt verktyg för att utveckla medarbetare och organisationen men även ett viktigt sätt attfå fram feedback på hur medarbetarena uppfattar ledarna.

The supply of uninterruptible power can be applied to many areas wherecontinuous operation is highly prioritized.The application of uninterruptible power for motor operation is facilitatedusing a frequency converter. Direct current operated frequency converters canbe applied directly to the power reserve which removes the need for additionalpower-converting.Batteries have long constituted the power reserve but advancements inthe development of ultracapacitors have created a viable substitution. Ultra-capacitors have high energy storing capabilities and can be applied to highpower applications.Maxwell is a leading manufacturing company of ultracapacitors and pro-vide different modules with built-in solutions for voltage balancing. Unevenvoltages between series-connected capacitors is a phenomenon caused by vary-ing capacitance. A configuration containing Maxwell?s 56V module is createdand constitutes the power reserve in the simulations.The discharge simulation shows a significant current that could damagethe system.

The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

An array of different retinal disorders is present as a threat in quite a number of dog breeds. These often lead to profound visual impairment or blindness. Many of the disorders are genetic, and they are, in Sweden as well as in other countries, subject to breeding programmes. The anatomy of the eye and the retina, as well as current examination techniques (ophthalmoscopy, electroretinography (ERG) and genetic analysis) are described. The more common retinal disorders encountered in dogs in Sweden are discussed: retinal dysplasia, generalized progressive retinal dystrophy, retinal pigment epithelial dystrophy, collie eye anomaly, sudden acquired retinal degeneration, retinal detachment and choroiditis. The possibly affected breeds are listed. The value of diagnostic findings is discussed and current advances on the subject in ophthalmologic research are accounted for..

SammanfattningDetta är en kvalitativ fallstudie av fem specialpedagogers arbete med specialundervisning i matematik. Syftet är att kartlägga deras arbete och uppfattningar genom att beskriva och analysera hur de organiserar sin undervisning i matematik, hur de undervisar ämnesinnehållet och hur de ger feedback till eleverna i klassrummet, samt hur de själva beskriver det de uppfattar som det specialpedagogiska inslaget i sin undervisning. För insamling av empirin har en kvalitativ metod med halvstrukturerade djupintervjuer samt observationer i form av ljudinspelningar och ostrukturerade fältanteckningar under lektioner gjorts. Ramfaktorteorier, fenomenografiska teorier, inlärningsteorier samt fallstudien, har styrt mitt sätt att bearbeta och analysera det empiriska materialet. Resultatet visar att det lärande som erbjuds eleverna av fyra av specialpedagogerna bidrar till ett ytinriktat lärande, och feedback som erbjuds bidrar till yttre motivation.

Inspection errors are nowadays usually written with pen and paper during building inspections. A company in Stockholm is developing a method by which inspections are made digitally from the beginning and where the inspection attachments shall be stored in a database. The idea of this method is that entrepreneurs can use the database to get an experience feedback from previous surveys so that they can improve their production processes. One problem that occurs is how inspection errors will be sorted into the database. They have to be sorted so that contractors or clients can use and sort out the information in a sensible way when they want to evaluate and make improvements in their production processes.This thesis examines how the inspection errors can be sorted in a structured manner.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

This paper is part of the research programme ViSuCity, a programme with the goal of creating more sustainable urban planning through the development of better visual tools, which ultimately means better communication between various parties of public planning. The paper concerns the implementation of MCE into a 3D program for visualization. Multi criteria evaluation (MCE) is a technique that has been developed during the last 20 years. It merges GIS with AHP, forming a decision making tool for localization of, for example, new buildings.The result is an automated tool that enables advanced analysis of geographic areas.The tool has a very high potential due to the completely automated MCE and it is adapted for people without a technical background, let alone formal training in MCE. It provides great opportunities to test different scenarios, something that should be an important advantage.

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.