Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

Global warming is a huge issue that humans have contributed to through over-exploitation of natural resources and extensive usage of fossil fuels. Now more than ever, we need to embrace a recycle thinking and reuse our waste, for example through producing biogas from our food waste. The purpose of this report was therefore to identify the energy usage and emissions resulting from the biogas chain which spans from Solna Stad to Uppsala Vatten. Furthermore, potential efficiency improvements were to be identified and proposed. This report focused mainly on the first part of the biogas chain that includes the collection of the food waste and the reloading process.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

The essay deals with the subject about branding and the communicative process that entails between businesses and consumers. The purpose of this paper is to increase understanding of the opportunities and risks of brand building through sponsorship and Co-Branding. This descriptive analysis is made by highlighting the partnership between two strong brands in the Swedish market, Åbro & AIK, and how internal and external associations related to their impact on brand equity. The study has led to the conclusion that the sponsorship should be seen as synonymous with Co-branding, ie. a synergy between two or more brands.

The Sand Catcher                                                       The thesis project The Sand Catcher investigates the encounter between permanent structures and an ever-changing landscape. The migrating sand dune Råbjerg Mile in northern Denmark is 40 meters high and moves more than 15 meters every year. By introducing a solid structure on the site, the fast movement of the sand dune is emphasised and thereby our view of time and space.Through intuitively building models with varied openings and densities I investigated how architectural elements react with sand. From these experiments a series of spatial features and effects were found, generated from the meeting with the sand.The Sand Catcher is a solid and permanent structure. The sand is the liquid element that generates new spaces, circulations and experiences.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

The aim of this study is to better understand the Swedish concept of ?förebyggande socialt arbete?, preventive social work. I have conducted eleven qualitative interviews with different key persons and skaters, together with participant observation. During the process of analyzing the material I have used Randall Collins´ concepts of interaction ritual chains together with Jean Laves and Etienne Wengers concept of situated learning. The answers could be split up in three areas, first those who regard prevention work as building good things for the future.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

A real option model is developed to examine the crucial factors affecting the agricultural firms? decision to quit the production and rent out the land to a company building a PV power plant. The public policies in support of investments in renewable energies have created the conditions for a market regarding investments in PV installations in agricultural areas.The decision to switch offers to the agricultural firm and to society several economical, social and environmental benefits, representing sustainability. However, PV installations in agricultural areas require the allocation of a certain land area. By assigning a part of land to PV installations, thereby the area of land allocated to agricultural production decreases.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

How can I make art that face people in their everyday lives, which is integrated into their lives, becoming a part of the discussions both in the mundane and in the room of society? Can I do this by working with performative interpretations that are participatory driven? I have explored how artists and participants can create spaces that are both open and confiden- ce-building, and how they at the same time enable us to question established norms. How to engage in dialogues concerning social, political and existential issues like; What is freedom for me - What is freedom to you? What is it that is important? Which topics are never upraised for discussion?The project is about putting thoughts, experiences and bodies (my own, the participants and the viewer?s) in relation to each other and to the location and context they are in. It ?s about creating a broader perspective where everyone?s voice is important and can take place.

The purpose of this essay is to analyse and understand how branding can take place in a football organisation. Football clubs have for a long time been seen as non-profit organisations but since money have become a main factor also in football these days the organisations are more or less turning in to commercial businesses. Football organisations have for many years neglected the assets of actively contributing values to their brand. Despite that branding doesn't seem to be seen as important in football organisations as it is for real companies who spend a fortune of money on building strong brands, which makes us curious to find out how this approach can be developed also in football. We are also interested in what the characteristics are and which underlying factors that determines the choice of a football brand.

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.