This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

In the post-war era many European countries were recovering from the ravages of the bombings of the second world war destroying whole countries. Sweden being neutral was spared the destruction of war but instead we demolished almost as much housing all by ourselves. A social program was modeled to modernize the country and to drag the swedes out of poverty by building one million apartments in just ten years and demolishing the old, dilapidated working-class neighborhoods. The traumatic events of the demolition of large areas of both the central and the outskirts of most Swedish cities is still very much present in the collective memory of people today and the new modernistic districts are still paying the price of that, more than fifty years later. Today these modernistic districts are in need of repair, and they are often homes to groups alienated from society making their reputation even worse.

AbstractWe all have experience of dwelling, which means that everyone can have an opinion about the architecture of the dwelling. Today the building companies do not have time enough to investigate which architecture qualities their clientele ask for in their apartments. JM AB use to call their apartments ?generous city apartments?. But do these apartments fulfill the needs of their dwellers? And what would the apartments look like if they were designed according to the wishes of the dwellers? When JM AB get knowledge about the dwellers needs and wishes they can make even better apartments for their future customers.The purpose and the objective with this report are to draw up proposals for tenant owner flat.

The construction industry works today with a time limit, therefore it is important to have rational tools to improve the efficiency in the building process. That?s the reason for this report, where a standard for interior finishes has been developed for Sandvik. The standard for interior finishes is designed as a program for room functions and includes office space and sanitary areas. It is a proposal showing how Sandvik can design their premises in the future.

The overall purpose of this essay is to study in which degree the democratic model that is called participant democracy works in the Swedish municipalities. To achieve what I set out to do I will focus on a central political area in which the Swedish municipalities has sovereignty versus the state, in other words in an area where they rule themselves. That political area will then represent how well the participant democracy works in the Swedish municipalities. The research questions then becomes:Does the participant democracy at Swedish Municipality level work in a satisfying way?Does the participant democracy in a large Swedish Municipality in a central political area work?Does the participant democracy in a small Swedish Municipality in a central political area work?Are there similarities and differences between the municipalities?If so, how can that be explained?To answer these questions I will study documents regarding the planning and building area.

Uppsala like many other Swedish cities is affected by heavy housing shortage, in terms of too few existing flats and residents within the city limits. Every semester thousands of new students are facing the same problems of finding themselves adequate accommodation. The waiting lists for flats and student-dorms are getting longer for each year, and the situation is just getting worse. Simultaneously, Uppsala?s ambition is to increase its population and expand as a Swedish metropolitan, according to the Swedish governmental environment goals. This paper investigates and analyses the possibilities of expanding a city?s population by building high-rise buildings.

Som hjälpmedel inför projektering, byggande och fastighetsförvaltning finns ett antal verktyg för att kunna göra miljöbelastningsprofiler för byggnader. I denna rapport har två metoder använts för att göra en miljöbedömning av ett flerbostadshus. Metoderna är EcoEffect och Green Building Challenge. EcoEffect är en svensk miljövärderingsmetod för att mäta och värdera miljöpåverkan från en fastighet under en tänkt livscykel. I EcoEffect beskrivs miljöpåverkan som negativ påverkan på människors hälsa och ekosystem samt utarmning av naturresurser.Green Building Challenge är ett internationellt samarbete som startades 1996 med syfte att använda en gemensam värderingsstruktur för byggnader.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).