Sökresultat:
1865 Uppsatser om Cross-border cooperation - Sida 44 av 125
Flerkanalspublicering och dess påverkan på journalisters arbetssituation : en studie av flerkanalspublicering i olika stadier
Purpose/Aim: The aim of this thesis was to examine how multi channel publishing in different stages effect the work for journalists.Material/Method: The thesis is based on ten case studies selected from the literature and one conducted especially for this thesis. The case studies have been categorized according to a model that describes three strategies for multi channel publishing. The first strategy is to have a primary publishing channel, the second is to have separate editorial staffs for all publishing channels and the third is to treat all publishing channels equally.Main results: Journalists working for companies using the first strategy have not experienced any major differences in working conditions or work practices. For journalists employed by companies using the second strategy for multi channel publishing the effects on the journalists was noticeable but not major. The effects on journalists in companies using the third strategy are mainly stress and an uncertainty regarding how to use special media techniques..
Fitta mot fitta, kan STI smitta! : En queerteoretisk granskning av STI- information i Kalmar och Växjö.
Background:Several studies have shown there has been significant lack of knowledge about women who have sex with women cross infect each other with STIs. It has been less likely that women who have sex with women visit health care than heterosexuals, they often felt badly treated, invisible and did not always know where to turn in case of an STI. Objective: The objective was to examine if STI information from Kalmar and Växjö county websites and GCK-summit, targeted women who have sex with women. Method: With a queer theoretical perspective a critical discourse analysis was made by STI information on the internet. Results: Women who have sex with women have been excluded in the STI information currently available through Kalmar and Växjö county websites.
Hjullyft för rullstol
This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.
Marknadsundersökning av Claas Lexion tröskor : kapacitet och kundnöjdhet
LEXION is the name of the largest series of combines made by the CLAAS factory in
Germany. LEXION was introduced on the Swedish market 1996 and was for sale in Sweden
from 1997. LMB have sold over 400 LEXION-combines in Sweden.
In cooperation with the Swedish general agency we decided to make a market research on the
Swedish LEXION-market. The questionnaire was supposed to give answers about capacity
and technical equipment.
Before I made the questionnaire I studied manuals and combines.
I got 81 answers of about 325 questionnaires. That makes 25 % reply frequency.
Samtalsterapi på vårdcentral ? varför, hur och för vem?
Approximately one third of all patients in primary care have a psychosocial component to their illness that requires adequate professional treatment. However, primary care is insufficiently prepared for these patients. The aim of this case-study was to evaluate a pilot project in primary care offering psychotherapy as a treatment alternative. The data collected includes 1) data from 352 referred patients regarding demographics, diagnosis, treatment duration and pre- and post health status, 2) a patient-satisfaction questionnaire and 3) interviews with six therapists and five medical doctors. The treated patients improved significantly and showed a high degree of satisfaction.
Hur mycket "mjölk" ska det vara i mjölken, och hur styr vi det?
In most countries, the dairy industry focuses on the volume of milk produced instead of its composition. This results in a high content of water and a lower proportion of fat and protein. A high proportion of water is not desirable when processing the milk into various dairy products like cheese, cream and milk powder. High water content also increases the costs for transport and storage, and also an unnecessary, albeit marginal, strains on the world?s water reservoir.
Delat Ledarskap : Ett sätt att lätta på bördan?
Delat ledarskap är ett arbetssätt som många verkar vara nyfikna på men har svårt att finna information om. I en kvalitativ undersökning har chefer runt om i Sverige som både delar och inte delar ledarskap intervjuats. Kompetens och arbetsuppgifter, värderingar, tillgänglighet och effektivitet, kommunikation och makt och konflikter är områden som påverkar om man kan få ett delat ledarskap att fungera eller inte. Studien visar att en handbok bland annat bör innehålla övergripande information om ämnet, ha en lättförståelig text, tips och råd, begreppsdefinitioner, bilder och scenarier. Med hjälp av studien har vi skapat oss en bild av vad som krävs för att chefer ska få till stånd ett delat ledarskap och vad som bör stå i en handbok för chefer som är intresserade av delat ledarskap..
Avvikelserapportering : en rapport om sjuksköterskors erfarenheter
The purpose with this essay is to investigate which factors that are decisive for nurses? propensity for incident reporting. The study uses a descriptive cross-section design. Included are nurses that works at a care unit and who have worked as a nurse for > 1than one year. The survey was sent out to all nurses embraced by the criteria within a subdivision at a hospital in the middle of Sweden.
Employer branding i praktiken : - en fallstudie på ett tjänsteföretag
This essay ventilates the relatively new phenomenon employer branding. Due to societal changes, such as demographical and financial changes, the labour market in Sweden has changed. It is evident that an increasing number of organisations need to put more of an effort in their methods of attracting talent and retaining competence within the organisation. By a case study based on five interviews, the purpose of the study was to compare literature and practice to see how well they compare as well as how employer branding bring about different aspects of the effect. There was also an ambition to highlight aspects of employer branding considered important to have in mind when undertaking an employer branding exercise.
Matvanor och attityder hos högskolestudenter i förhållande till livsmedelsverkets kostråd
The study was a quantitative cross-sectional study which aimed at investigating college students? eating habits in relation to the Swedish food agency dietary recommendations. The likely factors associated with eating habits and attitudes towards dietary recommendations were also investigated. Non probability sampling method was used giving rise to convinient study sample of 51 individuals (41 women and 11 men) ages 19 to 37. The participants were part of four different types of educations, Care and health, Economy, Engineering, computering and societal planning and Culture and media.
Äldres upplevelser av apoteksprivatiseringen : Konsekvenser efter privatiseringen av de svenska apoteken
ABSTRACTThe privatization of pharmacies in Sweden took place in 2009, in part with higher availability of medicines as justification. For a good adherence, the patients needs a good availability of medicines from pharmacies. The aim of the study was that two years after the pharmacy reform study older people?s opinions on drug supply and pharmacy services, and which pharmacy chains they know about and use. The method used was a quantitative cross-sectional study and was conducted using questionnaires.
Utvärdering och uppdatering av typkurvor
The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.
Kriminalvårdens och socialtjänstens arbete och samverkan när barn har en mamma på anstalt. : En kvalitativ studie
Syftet med denna studie har varit att undersöka hur företrädare inom kriminalvården och socialtjänsten arbetar med barn som har en mamma på anstalt samt vad samverkan mellan myndigheterna har för funktion. Vi har valt att intervjua fyra professionella som arbetar inom kriminalvården och fyra professionella som arbetar inom socialtjänsten. Resultatet visar att myndigheternas olika lagstiftningar, utbildningar, kunskap om varandras verksamheter, uppdrag samt olika synsätt på barnperspektivet försvårar samverkan mellan myndigheterna..
Utveckling av universaladapter för torkblad i samarbete med European Automotive Supplier AB
This report looks at the possibility of designing a universal adapter for Flat Blade windshield wipers in cooperation with European Automotive Supplier AB.To understand and see if this is possible, a research and an extensive patent search where done. Then to add structure to the project a Ganttschematic were developed. To generate good and solid ideas, different methods for product development were looked upon.When a method was chosen and applied, a series of concepts emerged. Now the focus was to design and construct all the pieces. The desired manufacture procedures were looked upon as well as materials.
UTVECKLING AV PROCESSORPLATTFORM
Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.