Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

This study was conducted to test the hypotheses that a forest managed by selective cutting can store more carbon than a forest managed by clearcutting. The study was carried out as a meta-analysis. The data that was found was analyzed by performing t-tests on the proportional effect that the two silvicultural methods had on the driving factors of CO2-efflux and carbon stores in coniferous boreal forest. In all areas tested, an effect in favor of selective cutting was found, but not all of them significant however. The soil respiration following selective cutting was significantly lower than that of clearcutting, and the primary production of a clearcut area cannot according to reason exceed that of an area post-selective cutting.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

The study is made on behalf of SCA Skog Jämtlands förvaltning which is one of five administration units that SCA Skog consists of. The purpose of the study is to investigate which reduced expenses there are according to spatial concentration of cutting areas. By increasing the spatial concentration of cutting areas it will reduce the need of movements by trailer, also reduce the number of roads that you use during the activities. To be able to perform the study, access to a annual cuttings in nine years have been made available. From this volume new annual cuttings has been created but more concentrated. The two different results have been compared and the results show that concentration of cutting areas generates reduced need for trailer transports and less km road that has to be maintained. But then, if it´s practical viable can be discussed.

Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

This paper contains a study where we apply cross media and storytelling into the design process of a practical commercial campaign. The purpose is to learn more and deeper by using cross media and the ideal of storytelling practical. We applied a qualitative method for research of the project to provide a high-quality empirical work. The result shows that by using well-structured story early in the design process you will easily succeed with your cross media design..

The Swedish censorship is an institution run by the Swedish government since 1911 and has cutting films to protect the citizens from unnecessary violence. Their main purpose doesn't work well with the law of copyright in literary and artistic works, as they break this law while cutting movies. They therefore destroy the authors work by doing this, and in this thesis I will point out how they have destroyed the purpose of two scenes in the film Hellraiser and by that, more or less, altered how the audience may look upon two of the characters in the film.  The results points to the unnecessary way of physically cutting films to protect the audience, but also how they choose to work and what preferences they used in their line of work..

Cross-suckling, i.e. when an offspring nurses a female other than their own mother, occurs in pig production systems where sows are group housed during lactation. As production systems where several sows and their litters are housed together during lactation are getting more common, the need of knowledge regarding cross-suckling increases. The overall aims with this thesis was to investigate how sow behaviour and productivity are associated with the occurrence of cross-suckling, and to investigate consistency in sow nursing behaviour related to cross-suckling. The study included information about the first 4 parities of 40 LxY sows kept in outdoor and indoor production environments. Sows were single housed the first 2 weeks after farrowing and group housed (4 or 5 sows per group) from 2 weeks after farrowing until weaning, 7 weeks after farrowing.

This essay is divided in several different parts, but all are tied up together by a fact that we want to increase productivity. We hope to do that by programming the PLC and to reach this with a better security for the person how are going to handle the cutting machine under it?s cutting process. We should as well look for some other ways to come up with better instructions and way to work and handle yourself during work. This programming is done in GRAPH7.

During the latter half of the 18th century, when concrete started seeing general use in modern cities, the use of different methods to give the concrete a finished surface texture saw use. One of these was using different methods of mechanically altering the surface using a slew of cutting and crushing techniques with mallet and chisel. This was done in order to hide the often dull and gray look of concrete, and allude to other more expensive and luxurious stones. The work would possibly have been done by experienced stonemasons, using much of the same techniques and tools they would have used while working natural stones. Or did they? This essay explores, through the use of traditional handcrafts and tools, the claim that the working of concrete surfaces can be done with the same tools and skillset as the working of natural stone.

In the 10th of April 2010 the Polish Presidential plane crashed outside of Smolensk in today?s Russia. 88 passengers and 6 crewmen died a tragic death, among them the President of the Republic of Poland, Lech Kaczy?ski. A national week of sorrow was proclaimed and citizens all over Poland went out on streets and markets to honor the newly deceased President.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.