This dissertation examines how creativity can be of benefit for the school. It discusses if there is a need or demand for it and how the present situation is in Swedish schools. Defining creativity accurately is difficult but it is relevant to look at the environments that use creativity. There is a vast amount of literature that uses creativity and it varies to some extent. Creativity originates from meetings and combinations, both within and outside of the individual.

In this paper I attempt to analyze the ways the European Union defines its external borders in cross-border co-operation with its neighbours. The analysis is based on case study examining the founding components of a updated version of the Northern Dimension policy of the European Union.The analytical framework of the study is composed of three different perceptions on the cross-border co-operation; regionalisation, integration and flexible integration. I conclude that the model of cross-border co-operation laid by the Northern Dimension policy would have an impact on the EU's external border with Russia, making it more flexible and vague.As far as the geographical terms of the co-operation are concerned, they seem to shift from regional co-operation to greater emphasis the role of networks as basis for co-operation instead of traditional regions..

Denna rapport behandlar mitt examensarbete som genomfördes i samarbete med HaldexBrake AB. Haldex Brake AB håller på och utvecklare en ny generation broms åt lastbilar.Uppdraget bestod av tre delar. Att ta fram lösningsförslag som säkerhetsställer beläggjärnetsplacering i förhållande ett beläggjärn så kallad Cross-beam. Att säkerställa att bultar monterasmed rätt åtdragningsmoment på 230Nm. Den sista tredjedelen av arbetet bestod i attpresentera lösningar som helt eller delvis eliminerar oljud, när olika komponenter med spel,slår i delar i okhuset.I projektet har flera olika principkonstruktioner tagits fram och genom Freddy Olssonutvärderingsmallar har sedan en primärkonstruktion utarbetats fram.I dem andra två resterande projektdelarna belyses lösningarna väldigt generellt av denanledningen att det kräver specialkomponenter..

The purpose of this thesis was to examine how the build-up of customer relations can be characterized at the end of the industrial selling process and how companies engage their cross-functional selling teams into this relationship building effort. Through a case study of Omega, a multinational company engaged in the selling of products of an industrial character, it was revealed that the build-up and maintaining of the customer relationship is of acute importance, as it presents the company with a window of opportunities. Through its relationship with the customer the company can be able to sell other products, which are related to the original purchase made by the customer. For the company?s competitors the established relationship might also serve as a barrier when attempting to enter the market or increase market share.

Can the lack of functional cross-cultural communication among individuals within an international organization be the reason for cultural clashes to occur, and lead to conflict between two cultures within the same organization?Our aim is to try to create a potential model of how cross-cultural problems can be studied, in order to contribute to the solution of the problem. And to examine whether the theories, which form the basis of our model can be applied in reality.The research have assumed from the hermeneutical approach for a holistic view of the problem area. The deductive approach has been used in order to distinguish whether the theories can be applied to reality, and qualitative research method for collecting data.The focus lies within cross-cultural communications, which defines the various cultural factors that can affect organizational culture. Hofstede dimensions and the social structure are mentioned and cultural factors as language and religion.

The Swedish group contribution rules do not include a right to deduction for cross-border group contributions unless the receiving company is taxable in Sweden. There has been much discussion regarding whether the rules are compatible with EC law. On 11 March 2009 the Swedish Supreme Administrative Court ruled ten cases concerning the right to deduction for cross-border group contributions. In three of these judgments deduction for a group contribution from a Swedish parent company to a foreign subsidiary within the EEA was allowed, despite that the subsidiary was not taxable in Sweden. The main purpose of this master thesis is to analyse whether the interpretation of the Supreme Administrative Court concerning the right to deduction for cross-border group contributions is compatible with EC law.

Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

The Swedish group contribution rules do not include a right to deduction for cross-border group contributions unless the receiving company is taxable in Sweden. There has been much discussion regarding whether the rules are compatible with EC law. On 11 March 2009 the Swedish Supreme Administrative Court ruled ten cases concerning the right to deduction for cross-border group contributions. In three of these judgments deduction for a group contribution from a Swedish parent company to a foreign subsidiary within the EEA was allowed, despite that the subsidiary was not taxable in Sweden. The main purpose of this master thesis is to analyse whether the interpretation of the Supreme Administrative Court concerning the right to deduction for cross-border group contributions is compatible with EC law.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

The essay is an effort to examine and define three examples of liminal dance performances through an aesthetic, hermeneutic and semiotic analysis. The examples are three dance or liminal performances, made by three different choreographers and performed at ?Moderna Dansteatern? and ?Dansens Hus? in Stockholm during September and October 2005. In the effort to determine the liminal and cross-over in the performances, the analysis focus on aspects such as: the character of the work, choreography, the use of scenery, stage light, requisites, conception of place and interior room, the use of costume and mask, the use of different media as text, pictures, film, and music or not using any these, and the interaction with the audience. The analysis depends on a historical background and the use of literature in the subject.

The purpose of this thesis is to investigate the European certificate of succession, and how it affects Swedish inheritance law. The European certificate of succession is a European document that will be introduced in august 2015 in the EU regulation of succession. The certificate of succession is meant to simplify the current process of cross-border inheritance by legitimizing the concerned parties, which according to the regulation are: heirs, legatees, executors of wills and administrators of the estate. According to the regulation, the member state of which the deceased had habitual residence shall have jurisdiction to rule on the succession as a whole. Since the certificate is a European document, it will have legal effect in all member states.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

Title:Comparison of databases ? Is the law an obstacle?Authors:Alexander Ankarberg, Applied Information Science.Tutors:Lars- Eric LjungProblem: Cross running databases is getting more and more significant during the development of the information flow. There are huge benefits if we start to use the technique that already exists. The law is today an obstacle, so what would happen if the law wasn?t so stern.