Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The purpose has been to investigate leisure-time centers actual work on children with attention deficit disorder. In addition, the study strives to make leisure-time centers way of working, in relation to their assignments, visible. The study has also compared how the leisure-time centers work and what the research says. The survey was conducted with the help of three exploratory interviews with pedagogues and three-piece observations at the leisure-time centers. It was carried out at three different schools in two counties in Sweden.The results of the survey show that the schools are trying to create clear procedures, though the centers succeed with this in varied degrees.

This report consists of a discussion about suitable methods for studying complex sociotechnical systems that are still being developed. There are large economical advantages with studying new systems before they are completely developed since problems can be discovered early and thereby avoided. It is, however, difficult to study developing systems, there are methodological limitations. These limitations are discussed and recommendations for studying non-existing complex sociotechnical systems are presented.The report is based on experiences from a study of the introduction of a shipboard helicopter on the corvettes that the Swedish Armed Forces are developing. A shipboard helicopter implies high requirements on the hosting ship.

Since the 1980s, the management philosophy New Public Management has resulted in major changes in the public administration system in several countries, especially in the West. A market oriented approach and an increased focus on performance measurement are ideals that are salient in these changes. The aim of this bachelor thesis is to examine the management philosophy?s influence on international relations through a critical analysis of some of its ideals in the management of international development cooperation, where effectiveness, quality, and results have been new dominant concepts. Through a qualitative content analysis of a Swedish Communication from 2014 ? the Aid Policy Framework ? and a debate in the Swedish parliament where this Communication was discussed, different themes that reflect the strategy of so called results based management in Sweden are identified.

Purpose: To explore how the changes in work life, here represented and depicted through the concepts of knowledge work and knowledge worker, have been incorporated in the official psychosocial work environment discourse in Sweden. Methodology: Critical discourse analysis, contrasting the official psychosocial work environment discourse to literature on knowledge work and knowledge worker, to explore how employees, employers and their relations are constructed within these two discourses; focusing identity, autonomy and power. Using the constructions to make visible how they are articulated, used and dealt with in a real life case from the Work Environment Authority. Theoretical perspectives: Our social world is socially constructed and language is the main tool for constructing it. Discourse analysis is thus not just a tool for deconstructing texts but also for enhanced understanding of our construction of the world and our ability to communicate about it.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the productivity. In order to improve in productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.

The swedish law against female genital mutilation (FGM) prohibits procedures that removes parts of the female genitalia and thereby makes permanent changes in the body. The problem with the wording of the law is that it may also apply to the western phenomenon cosmetic genital surgery. This paper therefore examines if cosmetic genital surgery should be covered by the swedish law against FGM, by making a critical comparing analysis. The paper begins with comparing FGM with cosmetic genital surgery to prove that there are more similarities than differences between the procedures. By using the theoretical perspectives universalism and postcolonialism, the paper then examines why, particularly in the West, there is a different approach to FGM than to cosmetic genital surgery, regardless of the similarities of the procedures.

The purpose of this thesis is to study how homosexuals and homosexuality were represented in the press during the trials against the Pentecostal pastor Åke Green, and to what kind of social representations and narratives these representations can be related.Using critical discourse analysis and theories about the differentiation between in- and outgroups I try to unveil implicit meanings and attitudes towards gay people mainly at the local text level. The material consists of articles in Ölandsbladet and Dagens Nyheter that were produced before, during and after the trials.The analysis suggests that homosexuals are construed as a deviant outgroup and that the majority, the ingroup, is presented as an essentially heterosexual, tolerant community. Homosexuality is wrong and heterosexuality is the right way of living. Homosexuals, in terms of group lobbyism, are construed as an enemy, a threat, against Western ideals such as family values and freedom of speech. They indirectly become a threat to Swedish democracy.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

Syftet med denna studie är att studera samspelet mellan socialarbetaren och det sociala arbetet. Detta görs utifrån fem pensionerade socialarbetares egna berättelser från sitt yrkesliv. Kritiska händelser och situationer som socialarbetaren sett som betydelsefulla har stått i fokus, samt hur dessa händelser och situationer har påverkat yrkesidentiteten och synen på sig själv. Studien är kvalitativ med en induktiv ansats och utgår från en narrativ forskningsmetod med inslag av Critical Incident metoden. Studien vilar på en fenomenologisk tolkningstradition.