This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

Destillers dried grains with soluble (DDGS) is a by-product when producing ethanol. DDGS from wheat has a high crude protein content and a good amino acid profile, which makes it an interesting feed ingredient for poultry. The disadvantage of feeding DDGS from wheat to poultry is that it also contains a high fiber content that chickens don?t have the ability to break down. Lantmännen Agroetanol has developed a new protein feedstuff from DDGS by extracting wheat protein from DDGS, the product name is Agroprotein SD.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

Aktuell forskning har visat att psykologiska faktorer spelar en viktig roll för upplevelsen av långvarig smärta. Denna studie undersökte effekterna av en KBT-behandling bestående av introceptiv exponering och avslappning för patienter med långvarig smärta. Studien använde en single-subject design där sex smärtpatienter genomgick en sex veckor lång individuell behandling. De variabler studien undersökte var i första hand förändringar gällande grad av acceptans samt upplevd smärtintensitet, i andra hand förändringar gällande smärtrelaterad ångest, rörelserädsla, katastroftankar samt funktion. Deltagande i behandlingen var förknippat med ökad acceptans, förbättrad funktion, minskad smärtintensitet, minskad smärtrelaterad ångest, mindre katastroftankar samt minskad rörelserädsla.

In this essay the renewal of the modern sacred art has been examined through the creation of three works of art from the art project ?Kyrkorummet?. The aim has been to show that renewal of the modern sacred art is best accomplished by the combination of the artist history and Bible knowledge and the open mindness of the beholder towards the new and creative, in order to communicate the gospel in modern time.The large extend of the art project demanded a selection of the art works. Therefore, three were chosen and they show the last supper and the baptism in a renewal way including both symbolism and creativity. To complete and facilitate the analyses, a theme, light and water, have been used as well as relevant theories in art history with Kandinsky as main art critic.Through the art project and it?s teaching, history in combination with present time through visits in different and modern churches, thoughts have been stimulated and the result has been new works of art that speaks of our time.

This project report describes a supplement for character creation in a tabletop role-playing game ?Dragons and Demons." The purpose of this project is to improve the character creation for the players? trough the narrative elements such as character?s background story. The applied qualitative methods such as a test panel and a questionnaire were conducted for the evaluation of theories used during character creation and to get feedback on the supplement?s creative value for the players. The aim of the questionnaire was to see how the method for the character creation differs from the regular way of making a character for a tabletop role-playing game and if this idea improves user experience during the tabletop role-playing game.The results of the evaluation are based on answers from novice and experienced players, and conclude that the additional background story creates an insight into the character's past, which makes it easier for novice players to get quick started with character creation.

Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

SEB Merchant Banking provides to its institutional customers a true market neutral product called Dynamic Manager Alpha (DMA). The DMA is constructed by a long position in an exceptionally well performing mutual fund and a beta adjusted short position in an appropriate index. The key to making the product market neutral is adjusting with the correct beta, since the beta changes, it is very important to have a good model for predicting beta in the future.This master thesis begins with describing what beta is in a CAPM sense. It then continues with recognizing the so called ?Two Beta Trap?, which separates two kinds of beta.

We want to search knowledge in how teachers with a focus on after-school recreation centre estimate how their own competence is used in after- school recreation center and school and what expectations/apprehensions they have on their profession in the future. In our study we have asked teachers with a focus on after-school recreation center how they estimate that their competence has been used in after-school recreation center during the last three years. The method we have used to illustrate this is the Delphi method Nordänger (2009), where we interviewed eight respondents by e-mail. From the responses, we have found that teachers with a focus on after-school recreation center experience that their skills should get more attention in the school. They want to combine care and pedagogy that supports students' physical, intellectual, social and emotional development.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

This thesis work is the result of the company Prisjakt?s wish to develop and improve its current system of opinions for online stores. The challenge was to develop a similar system that competitors are using but better. The collection of information is based on purchases and are collected from Web-shops. The purchases can then be monitored in a control panel.

The aim of this study was to examine ways in which High School Students approach academic writing. Both discursive and critical-analytical levels in 21 PM-texts and 14 investigating literary essays were analyzed through a genre theoretical and sociocultural framework in order to widen the understanding of students? usage of explicit textual and interpersonal markers as well as their techniques of writing abstracts. The results showed that nearly 25 percent of the putative abstracts consisted of sampled and reshaped text sequences. The majority of these were on the other hand results of a creative process in which the students reshaped utterances from different sources.

The purpose of this study has been to find out how service companies work to increase the value of their trademark. A case study with personal interviews was chosen as data collection method and as case study object a service company was chosen. The result of the study shows that service companies strategically work with increasing the value of their trademark. To achieve this, agreement between the company product and the image of the trademark is required..

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..