Uppsats för avläggande av filosofiekandidatexamen iKulturvård, Ledarskap i slöjd ochkulturhantverk15 hpInstitutionen för kulturvårdGöteborgs universitet2014:35.

The aim of this thesis is to study the possibility of the existence of a specialist in bone tools manufacturing during the Mesolithic. The thesis describes the climate during the Mesolithic, argues for an experimental approach, and describes social organization in hunter-gatherer-groups and the processes behind cultural transmission. It also gives some examples of excavation sites in Scandinavia. An experiment simulating a teaching situation is made, in addition to the theoretical information, with the intent to explore how advanced the crafting of bone really is. The physical result is then studied and documented.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

In this paper we have studied possible future uses for Additive Manufacturing (commonly referred to as 3D-printing) in Space. More specifically we have sought to establish how Additive Manufacturing can be used to construct structures on the Moon. Our studies have shown that Additive Manufacturing has great potential for establishing colonies on not only the Moon, but perhaps even further away from our home planet. With Contour Crafting-technology in combination with ISRU (In Situ Resource Utilization) we could, with material already present in the sediment layers of the Moon, construct advanced structures without having to transfer any extra material from Earth. This would lower the costs of establishing a colony on the Moon to such extents that it could actually be fiscally possible..

This paper deals with knives excavated in the Birka Garrison between 1997 and 2004, in a selection of 100 knives out of approximately 400. The aim is to measure and analyze the material to find out if certain elements in design points to a specific craft. Two groups of knifeblades can be seen, one with a convex bevel and one with a flat bevel of the blade. Considering osteological evidence, historical sources, and the main suitabillity of the knives, it is concluded that some of the flat beveled knives may have been used for crafting leather and fur, whereas the convex beveled knives are of an allround type..

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

Vid additiv tillverkning så skapar man en produkt genom att sammanfoga material, till skillnad från traditionella maskinbearbetningsmetoder som är så kallade subtraktiva tillverkningsmetoder där en produkt skapas genom att material tas bort från ett råmaterial. I denna tillverkningsmetoden så utgår man från en CAD-modell av produkten. Vid produktionen så läser den additiva tillverkningsmaskinen hela tiden av modellens tvärsnitt och lägger på material lager för lager tills produkten är färdig.Syftet med detta arbete är att undersöka om additiva tillverkningsmetoder kan användas för att ersätta konventionella byggmetoder vid byggandet av enfamiljshus i framtiden. I arbetet undersöks även i vilken utsträckning som detta kan ske. För att besvara på detta så undersöks, förutom konventionella byggmetoder, även bygge av hus genom att använda prefabricerade byggelement, då detta eventuellt kan vara en konkurrent till de additiva tillverkningsmetoderna.

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

In this thesis we have examined why the establishment process of travel destination is essential for the tour operators and how the process can be influenced by different conditions. The thesis is written from the perspective of the tour operators and with the tour operator Ving as our case study, we have been able to create a picture of how the establishment process of travel destination may look like.We have chosen to deal with some different areas in this thesis that all are important for the creation of a holistic picture of the process. The overall segments listed in this thesis are the process itself, the tourist, marketing, the product creation and demand. By connecting our theoretical framework to the collected empirical data from our case study, we have analyzed the establishment process and drawn our conclusions..

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Networking is an important part, for organizations, in the recruitment process. This since the emergence of Internet networking has become more common and the organizations finds that networking is applied more frequently in the recruitment process. Organizations have noticed that networking often is a more cost efficient option compared to traditional recruitment. Since networking in the recruitment process has increased, we intend to investigate if and how it affects the composition of organizations. This thesis aims to examine networking in the recruiting process, and aims to make no differences between networking offline and online.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

Denna studie behandlar begreppen process och produkt. Syftet är att genom ett hermeneutiskt perspektiv undersöka några bildlärares syn på begreppen process och produkt i bildundervisningen på högstadiet. Tidigare har fokus legat på elevers färdiga produkt men idag är bedömningen i bildämnet mer fokuserad på elevers process (Skolverket, 2012:3). Undersökningen genomfördes genom  kavlitativa intervjuer. Intervjufrågorna är förankrade i Lindströms (2002:4-5) process- och produktkriterier.