In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

This thesis is a process oriented case-study. The studied case is a interactiondesignassignment of a databasevisualisation and the process. The goalis to do this according to the ways of a screenwriter.When the computers spread from the military and university's into homes all around the world the computers and the programs had to becomeeasier for the users to understand and use. User interfacedesign became more and more important and companies like Apple put a lot of resources intothe designprocess. This quite new and evolving area of research, interactiondesign, has been forced to search for methods in other areas like lm, gamedesign, psychology and behavioural science.

AbstractThe struggle for land has been an issue ever since Brazil was colonized by the Portuguese Crown. The deep social inequalities that the country faces were raised then. More than 45% of the agricultural land is controlled by only 1% of the landowners. There have been many movements since then, who has fought for agrarian reforms.MST, the largest social movement in Brazil, was born in the 1980s. They managed to mobilize the peasants and the poor people.

Bakgrunden till denna rapport är att det sportvarumärke jag samarbetat med ville utveckla en modell av längdskidåkningsjacka som fanns i deras sortiment. Undersökningen gällde att identifiera förbättringspunkter på en dam- och herrvariant av denna jacka. Avsikten var att bevara plaggens design och genom förändringar i mönstrens konstruktion förbättra passform och rörelsefrihet, och därigenom plaggets funktion. Genom att konstruera, sy toiler och prova av dessa på provmodeller, har rörelsefrihet och passform kunnat utvärderas. Resultatet visade att viktiga punkter var raglanärmens konstruktion, böjningen av ärmen, kragens form, ärmhålsdjup och placering av skärlinjer.

The purpose of this study is to examine how the concept multiculture has been defined and used in selected articles, which were published during the year 2006 and the following month. The study is based on five Swedish newspapers, from which 57 single articles were chosen and divided into total seven categories and dimensions which were partly developed from the theoretical base and partly from the chosen material itself. By using a qualitative analysis I have found following: In most articles the concept multiculture is used in an anthropological sense, meaning that the presence of several anthropological cultures is claimed before the concept multiculture can be real. An anthropological culture is of varying size and contents, in the majority of the articles an anthropological culture consists of a non-western and foreign country but can also represent a region or a continent. Aesthetic culture is, for the most part, used primary as an aid to define the current anthropological culture and not to stand for its own belonging to a specific genre..

The purpose of the essay was to discover how homeless persons want to live. Does it matter what it looks like? The method used was a qualitative study including literature and 10 interviews with ten homeless persons, of which seven lived outdoors and three in temporarily residences. The central questions were the following:How do homeless people want to live?In what sort of houses do they want to live and where?How do they look upon their situation and their future?What obstacles can occur if they for example got an apartment to live in?Are there any proposals to solve the problems?Most of them had been living outdoors for five to ten years, perhaps more, and they were worried and sad about their future.

AbstractThe subject of this paper is children?s thoughts and feelings about the forest and on the importance of the schools for their students? thoughts. The aim of this paper is to find out if there are any attitude differences towards the forest in schools in the city and in the countryside. To fulfil this purpose the work has been divided into two questions,1 Do children have different thoughts about the forest, depending on where they live?2 Does the school affect their students? thoughts about the forest?Two schools with different locations in the country have been visited.

The purpose of this paper is to describe how librarians andusers think of electronic books in libraries. My questions are:-What are electronic books, and how do they work?-How has electronic books been implemented by librariansin the libraries and on the libraries? websites?-How do users describe their view of electronic books?-How do the librarians and users think of electronic book inthe future?To be able to answer these questions I have studied relevantliterature, made qualitative interviews with two librarians attwo similar libraries and I had dialogues with several usersElectronic books were introduced 2002 at the two libraries.In the beginning the libraries made different types ofmarketing, but today they only have the website withinformation. Their purpose was to try this out and offer theusers a new media. So far, there are few users who borrowthese books, and maybe it depends on technical conditions.According to the dialogues I had, most of the users have noidea what electronic books are.

The purpose of this study is to examine the importance of a working laboratory in mathematics education, how it influences students? learning and the confidence the teacher has in the laboratory component. Focus has been placed upon the advantages and disadvantages that could follow in the working method.The method used in this essay is qualitative in order to answer all the questions that arise along the way, and in order to use this method in interviews. The interviews that has taken place has been with five class teachers that are currently teaching at a elementary school between the years of 1-5. The purpose of this study has been answered by using its literature and the qualitative method with the class teachers.The results of the research show that teachers express gratitude towards the method in use for mathematics studies.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

This paper is about the new programming language from Microsoft, C# (See Sharp) and the .NET Framework. They are still in beta-version, but will be released on the market in February 2002. This paper presents C#, not in detail but the characteristics that distinguish the language. A comparison is done with C++ and Java, since C# is most resembling to these languages. Both C# and Java have been developed from the mother- language C++.

During the 20th century a significant proportion (about 15 %) of the peat-covered wetlands in Sweden were drained to improve forest productivity. Area wise, most of the forest drainage was done in northern Sweden, but relatively speaking a larger part of the wetlands have been drained in the southern parts of the country. Most often, the forest drainage resulted in increased forest growth, but failures were not unusual, and harmful effects, e.g. on species richness, have been a common cause for draining. Ditch cleaning is necessary for maintaining the ditches in good condition.

This thesis is the result of the author?s interest in music and electronics, namely the design and manufacturing of a stereo sound system with an active crossover. In short it can be stated that an active crossover has many advantages over its traditional passive counterpart. The active design naturally results in a more complex system comprised of a multiple number of components. This report deals with the theoretical aspects of preamplifiers, crossovers and power amplifiers as well as power supply and control.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

The task in this thesis is the steering of one of Saab Bofors Dynamics robots using Sliding Mode Control, a method they never used before. The robot constitutes a system which in addition to perturbations and uncertainties due to modeling imprecision, hold the difficulty of being highly time variant. In order to be able to keep required performance with uncertainties and modeling imprecision present, the use of robust control methods like Sliding Mode Control is necessary. SMC is based on the states of the system being forced to stay on or in the direct vicinity of a hyper plane in the state space which is chosen in a way that gives the system dynamics desired properties. Other advantages with sliding mode are reduced order dynamics on the switching surface and total insensitivity to some uncertainties and perturbations.