The purpose of this paper is to present and analyze the yearly expenses for Swedish rental apartments during the period 1999 to 2007. At the end, it will give the reader a general picture of how the Cost-level has fluctuated depending on the production year when the apartment building was finished, and where the same building is located. This paper has the following questions as a starting point:- Can there be an identification of regions depending on where people tend to favor renting an apartment?- How are those regions distributed? That is, where are the Cost-levels of the yearly rental expenses highest and where are the levels lowest?Nine statistical surveys from the Swedish government agency Statistics Sweden (Statistiska Centralbyrån) have been used as primary sources for this paper. These surveys deal with price pictures of housing in general, but for this paper the only information that has been used is the one about rental apartments.

In an attempt to prevent ground damage and to reduce harvesting Costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find Cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing Cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

A large number of system development projects are allowed to proceed for too long, and leads to undesirable project outcomes. Research shows that more than half of the authorities involved reported that at least one of their projects have exceeded their budget, and that a third of all the projects had exceeded the budget. This problem led to the following research question: ?Which factors can explain projects continued escalation within public authorities?? To answer the question, a qualitative case study of the Swedish police?s implementation of PUST, a sort of case management system was conducted. The project received considerable media attention and a large amount of criticism was directed towards the project, partly because the project exceeded the timeframe and budget set at the start.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very Costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more Cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance Cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

Through the growing use and availability of information technology the dependency of Internet is today increasing. Internet makes ways for a more mobile business communication that Cost less. One of the latest applications of Internet technology are intranet and extranet. I have asked myself the question how intranet and extranet can affect companies efficiency and competitive advantage. In order to answer this question I performed a case study at Ericsson and ABB.

Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

Micro-power wind energy convertors have recently increased in popularity. The reasons for this are among other things the increasing Cost of electric energy and enviromental concern.In this thesis the connection of these micro-power wind energy convertors to the utility network is discussed. Electric standards for the connection of small production units is presented. Finally some calculations and measurements of electric quality are also presented. The utility network used in the calculations is part of Halmstad Energi och Miljö network..

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and Cost proposal on manufacturing and detail purchase.Demands on this project:1.

Denna rapport beskriver en produktutvecklingsprocess som behandlar utvecklandet av ett textilt material som isolerar och skyddar. Det textila materialet ska fungera till ett kylande fodral utan att förstöra dess funktion och behöver därför uppfylla en speciell kravspecifikation. Materialet ska isolera mot kroppsvärme, vara stabilt, skyddande och slitstarkt. Dubbelväv valdes tidigt i arbetet då det är ett enkelt sätt att kunna påverka det textila materialets egenskaper i form av material- och konstruktionsval, i en betydligt större utsträckning än i en enkelsidig väv. För att utveckla ett material med de efterfrågade egenskaperna har tester utförs och den metod som har använts är hypotesprövning.

During 2006 SNVDB (the national road data base for forestry) is being introduced to Holmen Skog. This data base contains all information about Holmen Skogs road systems. The information will then be used in different kinds of optimisation models which only produce correct and reliable results if the input data are of the adequate quality. Today there are reasons to believe that road data is of various qualities. The forest roads are often in a bad condition and have to be improved before a planned harvest. The Cost of maintenance and construction of new roads is a large part of the total harvesting Cost.

Kommunikation, kompetens, förtroende och engagemang är alla viktiga faktorer förfastighetsmäklaren som påverkar kundmötet. Fastighetsmäklaren ska arbeta aktivt medvariablerna för att få vetskap om och tillfredsställa den säljande kundens önskemål. Ennoggrant utförd behovsanalys av kunden tillsammans med ett individuellt anpassat kundmöteär faktorer som påverkar kundens tillfredsställelse i positiv bemärkelse. Studien bevisar attvariablerna samverkar och påverkar antalet nöjda kunder inom fastighetsmäklarbranschen..

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and Costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

Sweden has a natural gas grid extending along the west coast, from Trelleborg to Stenungsund. There are also several smaller local networks where a planned natural gas pipeline from Skutskär to Hofors prompted the need for a comprehensive study. This study examines the linkages that exist in terms of technology and market of natural gas and biogas in Sweden. Sweden has set high targets for the future with ambition to become independent of coal and oil as energy sources. Since 1985, a part of the solution has been import of Danish natural gas.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.