Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the Cost of wages industrial companies are now considering moving the manufacturing to low-Cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved and the aim of the work was to investigate the economical output of removing understorey trees before first thinning. Four treatments were studied. - no cleaning before thinning - cleaning of all trees less than DBH 5 cm before thinning - cleaning of all trees less than DBH 7 cm before thinning - cleaning of all trees less then DBH 9 cm before thinning The result shows a decrease of the Cost per m3 for the harvester with about 38% if all trees less than DBH 9 cm was cleaned before thinning compared with the un-cleaned area. At the same time the total net revenue increases with about 22%. .

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a Cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

City of Malmö has ambitions for the district Hyllie to become a demonstrative area ofsustainable urban development. As a part of this the following report aims to investigate the potential in using noise barriers combined with photovoltaics along Annetorpsvägen to generate solar electricity. To quantify the losses that shadows from buildings along the roadmight cause, a 3D-model of the area was constructed in SketchUp. This digital model made it possible to simulate shadows and how they change over the year. A reference model of a photovoltaic noise barrier (PVNB) was constructed and used to find the dates on which the solar cells are shadowed depending on building heights and positioning of the barrier.The results show that two lengths with a total distance of 400 meters is appropriate for applying photovoltaic noise barriers.

This thesis work is a 30hp D-level assignment in design as a co-operation between MälardalenUniversity and Scania CV AB in Södertälje. The purpose was to develope a close fitted catwalk.The market has seen an increasing value for these types of applications and have the ambition to keep up with the rest of the competitors. The catwalks of todays standards shall be estetical attractive, have a non slippery surface and be Costefficient.While working with this project I have spent a lot of time with the concept proposals and with the evaluation of the concepts, resulting in a final CAD model and a approximation of the Cost estimate. The new catwalk fulfils all the new recommendations and rules as sharp edges, ADR, the height of the stepup and a non slippery surface with built in drainage..

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

Syftet med det här examensarbetet är att undersöka om det är möjligt att överföra hallbyggnadsteknik till produktion av småhus för att sänka produktionskostnaderna. Studien visar att hallbyggnadsteknik enkelt går att överföra till en villa. Dessutom blir det billigare att bygga klimatskalet med vårt byggsystem jämfört med ett traditionellt prefabricerat småhus. Genom detta system kan den totala byggkostnaden för villan i jämförelsen sänkas med 3-10 % beroende på vilket fasadmaterial som väljs..

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

This dissertation is performed at the request of Lagafors AB who develops and manufactures stationery and mobile hygiene solutions for companies in the food- processing industry. The objective of this dissertation is to develop and construct a new, Cost efficient cleaning station based on an innovative technology.The technique is based on serially connected dosing pumps which allow the customer to work with concentrated detergents. This leads to serious reduction in the clients use expenses. Two units have been developed with this technique, one that is stationary and one that is mobile.The dissertation has led to good results which resulted in the sale of the first stationary unit of the Lagafors CPU before the end of this dissertation. .

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation Costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation Cost and carbon dioxide. The operation Cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production Costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.