This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Writers: Johan Lundqvist Eriksson and Elin SandbergSupervisor: Stig AnderssonEnglish title: Allocation of revenue in the hospitality industryKeywords: Revenue allocation, cost allocation, profit center, Du Pont model, taxes and manipulation of data.Date: January 2012Since the taxes for food and lodging has been different in Sweden for many years, the hospitality industry has come up with a way to save money on tax paying. When private customers stay for a weekend where the meals are included, the business is placing more than the relevant revenue on the lodging part, which has the lower tax. Because of this the results has improved and tax money has been saved. Now when the Swedish government has decided to lower the tax on food to the same level as the lodging, the chances for correct revenue allocation arises. When we approached the hospitality industry with our problem area a big interest was showed from the head chefs. They now see a chance to get more income on the meals and through this be able to show better results towards the owners.Two hotel managers at two different hotels and their head chefs were chosen for interviews.

The dependency of continuous electricity supply is high in the Swedish society today, at the same time no one is willing to pay for a too costly or over dimensioned power distribution system. The owners of the distribution systems are the ones responsible for this balance act of maintaining a high quality of electricity delivery to customers at a reasonable cost.In this master thesis a limited part of the primary distribution system (10 kV), owned by Mälarenergi Elnät AB and located in the city centre of Västerås, was chosen for a deeper analysis of its reliability. Its ability to handle outages of system components (N-1 and N-2 contingency analysis) was investigated to find out potential weak spots and parts of the grid that showed signs of being overdimensioned.The results of the performed simulations showed that in 74 % of the studied N-1 contingencies cases, consisting of outages of a bus bar in a distribution substation, the system could handle this without causing outages in other parts of the grid. For the N-2 contingencies 61 % passed the test. It was also found that one of the two included high voltage substations could alone supply the investigated part of the grid.

Uppsatsens syfte är att försöka förstå, utifrån existerande teorier och med hjälp av insamlad empiri, vilka parametrar i ett kundperspektiv som är av betydelse vid utvecklingen av en prissättningsförmåga bland business-to-business-företag.Vi har använt oss av en kvalitativ metod vars ansats är av abduktiv karaktär. Den empiriska datan har samlats in genom semi-strukturerade intervjuer vilka har genomförts via personliga möten samt via telefon. Då vi betraktar prissättning som en förmåga, vilken återfinns inom företaget, så utgår det teoretiska ramverket främst från det resursbaserade synsättet vilket styrks av en akademisk artikel som beskriver och förklarar bakgrunden till att prissättning kan ses som en förmåga. Därutöver beskriver vi den vanligaste prissättningsstrategin företag emellan; cost/plus-strategin. Vi argumenterar för att företag bör införa rutiner och skapa en entydig struktur, med särskild fokus på tre områden, för att försäkra kunden om att de erbjuder produkter med kundvärde.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

Uppsatsen ämnar utföra en intersektionell analys av hur kvinnliga rappare diskuterar cunnilingus i sina texter. Utförandet av en intersektionell analys innebär att undersöka, beskriva och tolka någonting utifrån ett sociologiskt perspektiv som tar hänsyn till hur samverkan av olika sociala maktstrukturer skapar förtryck för olika samhällsgrupper. För denna analys innebär det att se på hur cunnilingus diskuteras av kvinnliga rappare i relation till deras kön, klass och etnicitet, för att se hur diskussionen påverkas av dessa sociala faktorer..

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

This study examines the connection between Sweden`s crime rate and financial aid, focusing on the effects of social spending on different types of criminal activity in the Swedish municipalities between 2000 and 2022. Using theories such as social support theory and utility maximization, the study investigates the relationship between economic assistance and crimes like theft, attempted murder, drug offenses, and assault. The results suggest a complicated relationship: financial aid is associated with a rise in drug offenses and assaults but a decrease in larceny and robberies, when controlling for all observed and unobserved time invariant factors in the municipal factors (a fixed effects panel data model). However, when we test our model for robustness, the effects disappear meaning that other factors that are time varying in the municipality are biasing our estimates. Examples for this may be factors like peer pressure, substance addiction, and socioeconomic conditions that have a considerable impact on criminal conduct, financial aid alone may not be adequate to curb crime.