The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Surrogate boycotts are highly threatening for corporations in terms of both economical cost and image damage. All corporations are due to our globalized environment and increased stakeholder fragmentation gradually more risking to become victims of surrogate boycotts, which of nature is hard if not impossible to predict and prevent. Corporations are generally recommended to build clear and strong corporate identities, which should be reflected in their most important stakeholders, as this will secure minimum damage on the corporate image. Even a surrogate boycott situation can have positive effects on corporations, especially in terms of image, as such situation increases the brand involvement and thereby make it possible for corporations to connect with important stakeholders on an emotional level. .

The purpose of this study was to examine how food managers of Östergötland County disucss around their possibilities of reaching the government´s orientation towards 25 per cent of the food - procured, prepared and cooked in the school meal - coming from certified organic production. The study was a cross-sectional study in wich a qualitative approach was used. The sample consisted six food managers in Östergötland. Data processing was done through a semantic content analysis.  The result showed that involvment and intrest were significant factors for the introduction of organic food in the school meal. The three municipalities with the highest percentage of organic food used the SMART - concept.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

The current situation for Swedish grain farmers facing a situation with decreasing profitability makes it necessary for the farmers to find ways of increasing the margins in their grain growing. Decreasing profitabilities along with Lantmännens closing of grain elevators contribute to the necessity for farmers to invest in grain storing and drying at the farm. By investing in capacity for drying and storage of grain on the farm it is possible to recieve a higher price on the grain sold due to the possibility to sell when the price is higher compared to the harvesting season. An investment in grain drying and storage with a relatively low investment cost that recently has appeared on the Swedish market is the grain stir drying system. This study contains a comparison of an investment in a grain stir drying system where the grain is dried and stored in the same silo and a conventional drying and storage system.

Many corporations turn to IT-outsourcing to focus more on their core competence or to cut the IT-budget. There is one caveat, the costs presented at a first glance does not always present the entire truth. Instead the costs run deeper and so-called hidden costs exist beyond the contractual cost. Reducing these hidden costs may very well be crucial to the entire IT-outsourcing endeavor. However many firms are not aware of these costs and as such they have a reduced chance of success.

The Swedish bank Handelsbanken has, according to their own way of measuring, been more successful than a weighted average of their competitors during the last 38 years. They have also handled the recent financial crisis, as well as the one in the 1990´s, better than most other banks. This paper studies their management control system at branch level in order to identify the controls which have been enforced to ensure that a low risk level is retained in the lending. The controls that have been identified are; (1) A decentralized organization with the offices as profit centers where the manager has restrictions regarding risk level and the results are measured as K/I (cost/revenue). (2) The absence of bonuses and individual follow-up regarding performance measurement.

On three occasions, in 1973, 1993 and 2005, Swedish parliament and government has resolved to integrate the, previously independent, foreign offices beloning to the Swedish International Development Cooperation Agency (Sida) with the Swedish embassies. The implemenation of the integrationreform has however been a lengthy process. This thesis adresses two main issues: how has the integrationreform been able to remain a viable recipe for organizational change over time and why has the integrationprocess taken so long? Lastly I assess the possibility for effective implementation following the decision 2005.Based on New Institutionalism I conducted an historical analysis of the integrationprocess to explore the conditions for reform. My results indicate that the integrationreform primarly suited the interests of the Ministry for Foreign Affairs, making the Foreign Serivce more effective and clarifying the Ministry's responsibilty for Swedish development cooperation policy.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

Sigill Quality Systems has been certifying beef since the autumn of 2006 using the brand name label Swedish Sigill. IP Sigill (the certifying system for integrated production) encompasses the values: animal ethics, food safety, free range and environmental concerns. Product quality is not yet one of these values, and there is a variation in the quality of Swedish beef. Swedish Sigill wanted to investigate the factors that influence product quality, review which of the present regulations that have an influence on product quality and formulate new regulations with the purpose of enhancing the product quality (sensorial, technological and nutritional quality). A survey of quality parameters and factors that influence product quality was done in order to establish a scientific foundation to work from.

Detta arbete presenterar enmatematisk optimeringsmodell gällande val av Prefableverantör för Spinactor ABmed avseende på inköpspris med volymrabatt samt transportkostnad. Utöver dettatillkommer en kvalitativ undersökning om vilka andra kriterier som ärbetydelsefulla vid leverantörsavtal. De viktigaste kriterier applicerades i enegenutvecklad leverantörsvalsmodell som bygger på ramverket ?total cost of ownership?(TCO) där leverantörskriterierna kvantifieras. Utifrån kriterieanalysenframgick att de tre viktigare leverantörskriterierna för Spinactor AB idagsläget är leveransprecision, kundservice och kommunikation samt ekonomiskstabilitet.Lösningen av optimeringsproblemet genomfördes med två olika metoder,linjärprogrammering samt heltalsprogrammering, där linjärprogrammering vardominerande i lösningstid.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

Syftet med denna litteraturstudie är att jämföra larvterapi och konventionella metoder vid behandling av svårläkta sår utifrån följande perspektiv: upprensning av sår, duration av sårläkning och patienternas upplevelse. Polit & Becks (2006) modell användes vid arbete med denna litteraturstudie. Sökning av relevant litteratur gjordes i tre databas: PubMed, CINAHL och The Cochrane Library. Relevanta artiklar granskades med hjälp av granskningsprotokollerna modifierade av författarna efter Willman (2006). Nio olika studier har undersökts i denna litteraturstudie.