Sök:

Sökresultat:

3713 Uppsatser om Cost-effective measures - Sida 56 av 248

Undersökning av processparametrar för optimering av sol-gelprocessen för produktion av kärnbränsle

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Ljudisolering i prefabricerade betongstommar. En fältmätning av luft- och stegljudsisolering.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Utvärdering av miljönytta för olika miljöcertifieringssystem för byggnader : En jämförande fallstudie på Swecos kontor i Stockholm, Göteborg och Malmö

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

Solvärme till Östersunds Rehabcentrums terapibad : Förstudie av förutsättningar för, - och lönsamhet med, solfångare för att värma terapibadet

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Sömnskolans betydelse för personer med insomni ? en intervjustudie

Introduction: Sleep is necessary for human survival. Difficulty sleeping occurs in about one in four adult person in Sweden, insomnia in every ten. There are several reasons for difficulty sleeping, where stress is one of the most common. The quality of life and health are affected negatively. Treatment with proven efficacy against insomnia is not only sleep medication, but also cognitive behavioral therapy, CBT.

Telemedicin som stödtjänst : Vårdprocessen ÖAK-2004, för övre abdominell kirurgi vid Karolinska Universitetssjukhuset, Huddinge

Sweden?s health care is continuously subjected to economical cutbacks, which results in enormous workloads. To prevent problems that arise in these situations, it is of great importance to take measures to increase the efficiency of the working process. This goal can be obtained by increasing our knowledge of the body, under both normal and sickly conditions. That is, by sharing knowledge of the various medical service units within Stockholm?s county council and thus elaborates diagnostics.

Kostnadskalkylering på en förpackningsavdelning

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

Solenergisystem i Kista Galleria

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

Latent värmelagring i vattenburet uppvärmningssystem med elpanna för byggnadsapplikationer

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

Sortimentsinriktad avverkning

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

Visstidsdirektivets implementering i svensk rätt : Har korrekt implementering skett?

The essays main intent is to examine whether there has been a proper implementation of the Council?s directive 1999/70/EG into Swedish law regarding the requirement for measures to prevent the abuse of successive fixed-term employment contracts. To achieve this purpose there is a need for an examination of current law. The essay also has some secondary purposes. One of these secondary purposes is the question of whether the implementation of the Council?s directive 1999/70/EG has lead to a reduction of the workers employment protection, which is closely connected to my main question and the violation case.

Grafisk design i en eTjänstekontext

The aim of this thesis is to describe and analyze the geographical distribution of everyday criminality in the town of Borlänge during the year 2002 and to analyze which measures to be taken in the physical social planning to decrease this everyday criminality there. The term everyday criminality is here to be understood as those categories of crime that appear most frequently in the records of reports to the police every year. Here two kinds of crime have been in focus, thefts from cars and office burglary.In fulfilling this aim two main questions have been answered. The first one is how the everyday criminality was distributed geographically in the town of Borlänge during the year 2002. The second one is which measures to be taken in the physical social planning to decrease this everyday criminality in the town of Borlänge.In order to answer the first question a spatial autocorrelation analysis, Local Moran LISA has been used.

Roadshows inverkan på Servera Region Sydöst

Servera R&S AB is Sweden?s largest wholesale company within the restaurant and food service industry. Servera R&S AB is the daughter company to Axel Johnson AB, which in turn is a part of the Axel Johnson Group with Antonia Ax:son Johnson as the owner. Servera is a nation wide company with a business concept of offering a complete selection of merchandise and services to the professional food service market. The company is split into for different regions: the north region, the middle region, the southwest region, and the southeast region and has its headquarter in Stockholm.

Ekonomi vid uttag av långa toppar som skogsbränsle i slutavverkning :

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

<- Föregående sida 56 Nästa sida ->