This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

The background of this study is the fact that it nowadays is more common to grow wheat after wheat. Usually we plow every autumn to remove the straw, and we wanted to study the effect of alternative methods to do it. We have done this experiment to answer the question if no tillage is better than conventional plowing. The results of the field experiment indicate that there is a link between plant establishment and the choice of equipment, but also a higher weed pressure in experimental plots with only ground tillage. The equipments which left much straw on the top of the ground the problems with fungi were more severe.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

Syftet med studien är att beskriva hur svenska multinationella företag tillämpar cost plus metoden vid interna transaktioner över landsgränser. Vidare har följande forsningsfrågor formuleras: Hur tillämpar företag cost plus metoden? Vilka faktorer påverkar internprissättningsprocessen? Fallstudien är genomförd på Älvsbyhus som är en av nordens största tillverkare av prefabricerade sektionshus av trä med affärsidén att sälja och tillverka färdigmonterade, källarlösa trähus i 1 eller 1,5 plan till marknadens lägsta pris. Den utbredda handeln mellan företag i olika länder har resulterat i ett ökat antal multinationella koncerner bildats, därmed har ett behov av internpissättning för värdering av interna transaktionerna uppstått. Huvudtanken med internprissättningen är att internpriset ska avspegla marknadspriset för varan eller tjänsten, vilket ofta inte är möjligt då ett marknadspris inte existerar.

Due to the well-developed rhetoric and the relative easiness to estimate costs, cost considerations are usually more in-depth than revenue considerations when discussing strategies impact on profitability. To avoid dysfunctional companies and poorly judged strategy decisions it is necessary to develop the rhetoric of revenue considerations.By collecting data from 230 respondents in a quantitative study of two grocery stores in Mora, the study aimed to assess the relationship between choice of generic strategy and self-reported buying behavior, considering differing decision-making processes of customers.The results of the study indicate that a differentiation strategy performs better than a low-cost strategy in terms of buyer frequency, number of goods and cost of purchase. However, due to a poor data collection method, the results are weak, and should therefore be questioned. The study indicates that reliability considerations for behavioral measures should be treated in the same respect as psychological measures, and therefore illuminates the need for new methods and measures to be developed..

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

Previous research has, by studying large listed firms, identified cost reductions and knowledge transference as the primary reasons for outsourcing.  Previous research has also indicated that Business Process Outsourcing is likely to increase in popularity and experience high annual growth going forward. This study aims to explore why mid-sized and large firms decide to in Jämtlands län, fully or partly, outsource their finance/accounting activities. Theories regarding transaction cost economics and resource based view composes the foundation of this study and the information used has been gathered through the use of semi-structured interviews.  The results shows, like the chosen theories and previous research indicates, that the outsourcing decision is primary based on expected cost reductions.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

This thesis is based on an assignment from a unit within an international group manufacturing industrial products. The purpose of the thesis is to analyze and suggest ways to improve the cost accounting system in use at the unit. The main source of empirical data has been interviews with employees. The theoretical framework is based on a comparison between traditional/standard costing and activity-based costing (ABC). The cost accounting system in use is described in detail and classified as a traditional/standard cost accounting system.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.