The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

Syftet med denna uppsats är att med hjälp av litteratur, observationer och elevtexter, undersöka hur man med hjälp av skönlitteratur kan inspirera elevers skrivande individuellt och i samspel med andra. Arbetet inleds med en forskningsbakgrund som fokuserar på elevers skrivutveckling, användning av skönlitteratur i skolan, vad styrdokumenten nämner om skrivande och skönlitteratur samt redogörelse för hur analyser av texter kan utföras. Metoden som använts för att inspirera elevers skrivande beskrivs, där utgångspunkten är en skönlitterär bok om Tummen av Inger och Lasse Sandberg. Eleverna har fått instruktioner om hur man bygger upp en text, för att sedan kunna skriva egna texter. För att kunna få en inblick i det enskilda skrivandet och skrivandet i grupp har en klass skrivit individuellt och en klass skrivit i grupp.

Inom EU har det tagits fram ett direktiv för miljövänlig design och produktion. Prestandan på ingående komponenter har lagstiftats inom flera olika områden. Detta har lett till att glödlampan skall fasas ut i hemmamiljön. Matta glödlampor och klara 100 watts glödlampor inledde detta år 2009. Ett av områdena är gatubelysningen (armatur + ljuskälla), där blir bl.a.

Fiskars morfologi, det vill säga dess utseende och form, kan variera beroende på hur de utvecklas och fortplantar sig. Morfometriska analyser används för olika typer av studier då det ger information om grupper av individer med samma reproduktions-takt, tillväxt och överlevnad samt fenotypiska grupper. Skrubbskädda, Platichthys flesus, delas in i två olika lektyper; utsjölekande och kustlekande, där de utsjöle-kande lägger pelagiska ägg och de kustlekande lägger demersala ägg. Morfomet-riska analyser kan vara en bra metod att skilja dessa lektyper åt i förvaltningen. I denna studie fotograferades skrubbskäddor och morfometriska analyser utfördes i samarbete med BONUS-INSPIRE för att avgöra om dessa två lektyper skiljer sig åt i morfologi.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

SNA Europe?s handsaw concept is called ?Bahco Handsaw System? and is constituted by a saw handle with the possibility to switch between different saw blades. The sales of ?Bahco Handsaw System? products have not achieved the desired results probably due to the high price. Developing a more cost efficient handle, enabling a lower consumer price of the product, is assumed to increase the sales volume.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

In electricity markets evolving towards liberalisation and internationalisation, green certificates are seen as an important tool to promote production of renewable energy. In a green certificate market producers sell certificates received per unit of electricity generated from renewable energy. Trade in renewability is thereby decoupled from the the physical electricity trade. Tradable green certificates in combination with renewables obligation are implemented or planned in several EU member states. Integration at EU leveland the creation of a common certificate market seem like a possible next step.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

Purpose: The purpose of this paper is to investigate whether there is a correlation between the actuarial assumptions, of listed groups in Large Cap on the Nasdaq Stockholm, equity ratio and their pensionplans funding status.Method: The study is based on a quantitative research method, where the analysis of annual reports takes place. The quantitative research method has enabled the paper to perform related analyzes and comparisons of means between groups, for listed companies equity ratio and pension obligation, and the relation to its actuarial assumptions. Correlation measurements are made using a non-parametric method, Spearman's rho, then further tested using one-sided hypotheses t-test.Theory: The backbone of the thesis is presented using two theories, earnings management and the principal-agent theory. These theories are intertwined with the previous researches, which also dealt with the essay topic of earnings management in previous years and in other countries.Empirical: Correlation analyzes between the studied actuarial assumptions and corporate groups solidity and pension financial status is presentedusing tables and charts. These are further analyzed using hypothesis tests and scatterplots.Conclusion: All tests resulted in very weak correlation between the different variables and can there for not be classified as significant.