A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

Flexible working conditions is used extensively in organizations today as a way tocreate flexibility for the employer. Recently we?ve been reading in the newspapersthat this approach is a growing problem and the EU has warned Sweden twice thatabuse of these forms of employment must be stopped. The Government has recentlysubmitted a proposed rule change to reduce the possibility of stacking one temporarycontract after another. Borlänge kommun makes themselves more flexible with theintermittent employments.

Då stora vägprojekt ska utredas genomförs en samhällsekonomisk kalkyl för att ta reda på hur stor nyttan av projektet blir för samhället. Det kan vara komplicerat att ekonomiskt värdera de olika ingående delarna samt att veta vilka parametrar som verkligen ger effekt i projektet. I storstäderna gör den högre tätheten att andra konsekvenser för ekonomin, miljön, kapacitetsutnyttjande med mera blir annorlunda än på landsbygden, andra brister uppkommer i beräkningsverktygen. Utifrån en belysning av de problem som finns i dagens beräkningsmetod ges förslag till utveckling av beräkningsverktyget EVA (Effektberäkning vid väganalyser) och Effektsamband 2000 genom att ta fram förslag för hur kostnader eventuellt skulle kunna hanteras i beräkningarna. De brister i beräkningsmodellerna som har framkommit gäller bland annat deras enkelhet i storstadsanalyser och att de inte är flexibla. I beräkningarna tas inte heller de ökade samhällsekonomiska kostnaderna upp som uppstår då innerstadsnära bostads- och kontorsbyggen inte blir av.

Då stora vägprojekt ska utredas genomförs en samhällsekonomisk kalkyl för att ta reda på hur stor nyttan av projektet blir för samhället. Det kan vara komplicerat att ekonomiskt värdera de olika ingående delarna samt att veta vilka parametrar som verkligen ger effekt i projektet. I storstäderna gör den högre tätheten att andra konsekvenser för ekonomin, miljön, kapacitetsutnyttjande med mera blir annorlunda än på landsbygden, andra brister uppkommer i beräkningsverktygen. Utifrån en belysning av de problem som finns i dagens beräkningsmetod ges förslag till utveckling av beräkningsverktyget EVA (Effektberäkning vid väganalyser) och Effektsamband 2000 genom att ta fram förslag för hur kostnader eventuellt skulle kunna hanteras i beräkningarna. De brister i beräkningsmodellerna som har framkommit gäller bland annat deras enkelhet i storstadsanalyser och att de inte är flexibla.

The aim of this two year master thesis is to analyze how digital preservation is presented as a problem in the Swedish national strategy for the digitization and digital preservation of the Swedish cultural heritage. In order to study which assumptions about digital preservation exists within the strategy I apply the discourse oriented methodological tools presented by Carol Lee Bacchi, which focuses on discerning what problem or, rather, representation of a problem exists within a specific policy. This study is a post-structuralist discourse analysis. The main focus of the study is on what assumptions and prerequisites the dominating representation of the problem is based upon and how the representation has evolved. The main material of the study consists of public investigations conducted by the Swedish state, governmental propositions and replies as well as other public documents upon which Bacci's methodological tools are applied.Results show that digital preservation is primarily interpreted as a financial problem as the national strategy and its surrounding documents stress the need of cost-efficient solutions.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

Title: GMO Food ProductsThe issue of marketing and selling them in Europe - A Business and Legal Perspective.Author: Shane KingSupervisors: Anneli Carlsson and Ewa RabinowiczProblemThe European Unions regulations in regard to GMO?s and the approval process for both release into the environment, and onto the market, has been under fire by the USA along with Canada and Argentina. The WTO has ruled on this issue in favour of USA et al.The problem that was identified was in regard to consumer opinion in the EU. How could the EU meet its numerous international trade obligations while at the same time meetingthe needs of the citizens of the Union? Added to that was the issue of whether or not the?EU? perspective was indeed an EU perspective or rather the perspective of a fewMember States.

I detta självständiga arbete gör jag en omfattande analys av första satsen i Carl Philipp Emanuel Bachs verk Flöjtkonsert i d-moll. I mitt arbete har jag studerat kompositörens liv och samtid, gjort en teoretisk analys av Allegrot i flöjtkonserten samt analyserat min övningsteknik och med hjälp av relevant litteratur fått nya verktyg till själva instuderingsprocessen av detta stycke..

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Flexible working conditions is used extensively in organizations today as a way tocreate flexibility for the employer. Recently we?ve been reading in the newspapersthat this approach is a growing problem and the EU has warned Sweden twice thatabuse of these forms of employment must be stopped. The Government has recentlysubmitted a proposed rule change to reduce the possibility of stacking one temporarycontract after another. Borlänge kommun makes themselves more flexible with theintermittent employments.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.

The value of game for hunting from a social economic viewpoint is an interesting topic that is currently being investigated in a Swedish research program. The amount of damages that the game stocks cause to the forestry is, and has been in focus for a longer period of time. Something that I saw as missing was an investigation of how much an active game keeping measure might cost in lost incomes for forestry in terms of reduced acreage for forest production. This question was the foundation for this investigation, which purpose is to give interested persons with decent knowledge of forestry an example of how cost estimation for forestry resembling the example that is studied can look like. The measures that has been taken is a felling of forest in different ages on both sides of a forest dirt road to create increased asset of forage for the game, and at the same time give hunters that have their post along the dirt road a better chance of seeing passing animals early and increasing the possibility to shoot good shots. The area, which is a part of The Swedish Association for Hunting and Wildlife Management estate Öster Malma, is also used as an example for guests who wish to learn more about managing ungulates. These guests have now got the opportunity to get information on how big the costs are for the measures that have been taken. The main conclusions of this work is that changed timber prices and foremost a change of interest rate makes big differences on the result of the calculations.

This project is based on my fathers farm which lays outside Löberöd, twenty kilometres south of Eslöv in Skåne. While my family for some time have thought about building a new milkingstable with AMS(Automatic milking system) I decided to compare the AMS with a conventional milkingstable. We are abit concerned about how many cows we should have in the new stable. Because of that I calculated with two different number of cows. I have compared three different types of milking stables: One alternative is 180 cows milked in a double eigth hearing bone milking stable. The second alternative is 128 cows milked with two DeLaval VMS-robots. The third alternative is 171 cows milked with three DeLaval VMS-robots. One salesman from DeLaval and one salesman from A-betong helped me to get marketprices on the milkingrobots, building, ventilation and prices on all the concrete. In all the costs labour is included. The rest of the costs are calculated in a softwareprogram called K-data 03 which is a program with predicted costs. The calulations from the program showed that the price in the milkingpit system was 51 000 sek per cow.

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.

In this thesis we propose a conceptual plan for thedevelopment of an Agroforestry Training Centre (ATC)in Musoma, Tanzania. The aim is to make a proposalto support peasant education in agroforestry. How canan ATC in Musoma be developed into a stimulatingand educational park suitable for teaching agroforestrymethods to peasant farmers and other potential users?To answer that a field study was conducted to investigatehow our client Vi Agroforestry Programme (Vi) and thetarget groups of the client can benefit from the site.The thesis begins with a short explanation of thecontext, in which the ATC plays a part followed by amethodology chapter. Next are three chapters presentedwhich introduce the reader to the research conductedbefore starting the proposal, these include: results ofliterature studies, study of precedents, and results of fieldstudy.