Sök:

Sökresultat:

12107 Uppsatser om Cost-Based Rent - Sida 62 av 808

Reducering av ledtider samt framtagande av kalkylmodell

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

Buskröjning längs skogsbilvägar : en produktivitetsstudie av två kättingslagor

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

Value stream mapping i praktiken : En fallstudie på Light My Fire

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

Fattigvården i Gustavsberg 1869-1924

With the help of large amount of archive material I have examined how Gustavsberg in Värmdö were affected by the great labor migration in Gustavsberg porcelain factory during the period 1869-1924. I have chosen to investigate how the municipality dealt with the poverty relief issue out of the labour immigration perspective. To my surprise I found out that Värmdö was not responsible for Gustavsberg in the poverty issue. The workers belonged to the factory, which had a relatively well-developed system of poverty relief in place. This is not to say that the workers received any support from the factory to any great extent.

Hållbar utveckling - paradigmskifte inom snabbmatsbranschen? : En flerfallsstudie av hamburgerrestauranger

Sustainability issues have become increasingly high-profile and important in recent decades. In addition, quality issues have come to play a central role in corporate marketing, strategy and management. The word quality can be defined differently in different contexts. This paper focuses on the concept of quality, based on the Total Quality Management perspective, which in Swedish has come to be known as Offensiv kvalitetsutveckling. Offensiv kvalitetsutveckling has been described as a theoretical framework in which an organization continually strives to meet and preferably exceed customer needs and expectations at the lowest cost through continuous improvement, and in which all members of the organization are committed and focused on the organisation's processes. The purpose of this study was twofold. First, to clarify the applicability of the theoretical model Offensiv kvalitetsutveckling as a theoretical explanatory model. Second, to explore how Max Hamburgerrestauranger AB performs according to the values in Offensiv kvalitetsutveckling. A multiple case study was conducted in order to explore these topics. The results showed that Max Hamburgerrestauranger AB is working in a dedicated and value-driven manner, aligned with the values ??that form the basis for Offensiv kvalitetsutveckling. The results also showed that the model for Offensiv kvalitetsutveckling could serve well as a theoretical explanatory model, but that the model would benefit from being developed, enriched or integrated with other models.

Verksamhetsstyrning på LFV - Sturup med ABC och BSC

Den traditionella ekonomistyrningen har kritiserats för att ge ett bristfälligt beslutsunderlag med schablonmässiga kostnadsfördelningar. ?Activity Based Costing? - ABC har lösningen som åtgärdar bristerna med en alltför aggregerad information. Stark kritik har även riktats mot de finansiella nyckeltalens särställning och alltfler företag har därför börjat komplettera den finansiella redovisningen med nyckeltal som grundas på andra än rent ekonomiska värden. De immateriella tillgångarnas betydelse har i allt större grad accepterats.

Hantering och mellanlagring av jordmassor

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

Nyttjande av ofrörbrukat byggmaterial : En rapport åt Peab Jönköping

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.

Interna processer : Modell för ett effektivt returstålsflöde

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

Valfeber: en jämförelse mellan hur EU-parlamentsvalet 2009 och riksdagsvalet 2006 har skildrats i Svensk dagpress

Endast 31 procent av svenskarna kände till att nästa europeiska val äger rum under 2009. EU beräknas ligga bakom 60 procent av det arbete som sker inom svenska kommuner och landsting varför det har stor betydelse vilket alternativ som väljs i ett EU-parlamentsval i Sverige. Trots det är det rent historiskt ett betydligt högre valdeltagande vid Riksdagsval i jämförelse med EU-parlamentsval. Vid de två senaste valen var valdeltagandet vid riksdagsvalet mer än dubbelt så högt som vid EU-parlamentsvalet. Rätten att rösta vid allmänna och rättvisa val är en grundläggande demokratisk rättighet som innefattar att medborgare väljer det alternativ som bäst stämmer överens med deras preferenser.

Krigsekonomi? : Hur den privatägda ammunitionsfabriken Norma Projektil AB i västra Värmland påverkades av staten under perioden 1938-1943

The topic of this essay is whether the private owned ammunition factory Norma Projectile AB was a part of a war economy system from 1938 to 1943. This is done by analyzing specific documents from the company´s archives that expose the connection with Swedish authorities. The selection and analysis of these documents are based on four main criteria?s of the concept war economy. These criteria?s are based on Ivan T.

Back to the roots. Utforskande studie av mina minnen från Dalarna

Jag har som examensarbete på master-nivå formgivit en sittmöbel med utgångspunkt från min uppväxt i Dalarna. Målet har varit att göra en filosofisk tolkning av mina minnen samt en hyllning till regionen, i synnerhet Borlänge där jag växt upp.Jag har under projektets gång gjort en resa både på ett mentalt och rent fysiskt plan tillbaka till den plats jag växt upp för att utforska mina minnen och därigenom skapa en plattform för mitt designarbete.För att nå mitt resultat har jag använt mig av designmetoder som ITK, intervjuer, skisser, studiebesök, materialtester, mockups samt modelleringsverktyget Rhino.Resultatet är en stol inspirerad av saker som bland annat Ornäs stugan och musikkulturen i Borlänge. Stolen består av en metallkonstruktion, trädetaljer vid fötterna samt armstöden och en sits i läder.For my thesis work on postgraduate level, I have designed a chair based on my upbringing in Dalarna. The goal has been to make a philosophical interpretation of my memories and a tribute to the region, particularly Borlänge where I grew up.During the project I have made a trip both on a mental and physical level back to the place where I grew up to discover my memories and thereby creating a platform for my design work.In order to achieve my result, I have used design methods such as ITK, interviews, sketches, field trips, materials testing, mockups and the modeling tool Rhino.The result is a chair inspired by things like Ornässtugan and the music culture in Borlänge. The chair consists of a metal construction, wooden feet and armrests and a seat made from leather..

Läs- och skrivsvårigheter och alternativa verktyg i skolvardagen

The purpose of this study was to investigate how two students at intermediate level in reading and writing disabilities and two special education teachers perceive the use of assistive tools in school. The questions used to answer the purpose was how assistive tools are used based on students´ perceptions, the purposes for which assistive tools are used based on special education teachers´ perceptions, what opportunities and/or barriers pupils and special education teachers experiences with assistive tools and how it works when assistive tools are implemented based on students´ and special education teachers´ perceptions. Data were collected by interviews. The results show that the assistive tools are mainly used for writing assignments and to ?read-with-ears?, primarily to facilitate the learning process in the classroom.

Jämförelse av effekter från gruppträning i bassäng med landträning hos patienter med knäartros : Utvärdering av effekter på smärta, funktion i det dagliga livet och fritid- och idrottsaktiviteter

AbstractAimThe aim of the pilot study was to compare short- and long-term effects from group exercise in water with land-based exercise on pain at rest and pain with movement, along with the effects on function in daily life and practice of sports and leisure activities in patients with knee osteoarthritis. The aims were: Is there a difference in short- and long-term effects on pain intensity at rest and pain with movement after exercise in water or land in patients with knee osteoarthritis? Is there a correlation between the degree of pain intensity at rest and with movement, respectively and long-term effects from the two different exercises on function in daily life and practice of sports and leisure? MethodThe study was a randomized intervention study without a control group. Twenty patients with radiographic knee osteoarthritis were under a total of eight weeks treated with either land- or water-based exercise lead by a physiotherapist. The patients rated pain intensity at rest and with movement on a numerical rating scale (NRS) before and after the first training session, before and after the eighth training session, before and after the fifteenth training session and before the last and sixteenth training session.

En frivillig standards kvalitetsma?ssiga pa?verkan pa? redovisning av varuma?rken : ISO 10668

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

<- Föregående sida 62 Nästa sida ->