Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

The purpose of this paper is to examine how the traditional airlines' strategies are affected by the low-cost carriers emergence and their business model and in wich ways they can achieve profitability. Furthermore we also want to examine the factors that affect the airlines' efficiency and competitiveness.The results of this study shows that the growth of the low-cost carriers have affected the network airlines' strategies as they, among other things, had to also lower their fares. This has forced them to revise their cost and efficiency in their entire operation. The result has also shown that the network companies can not come down to the same level of low costs as the low-cost carriers, and must therefore examine their ability to increase revenues instead. .

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Lokala investeringsprogram was a subsidy program which supported environmental reforms during the years 1998 to 2002. The subsidies were given to Swedish municipalities. Most of the evaluations of the subsidised projects have now been completed and included in a database. The purpose with this thesis is to analyse whether the instrument has been effective with respect to carbon dioxide reductions and costs. These calculations have focused on subsidy and cost efficiency. The analysis has been compared with a previous report called "LIP ur ett samhällsekonomiskt perspektiv". The result shows that the reduction cost for one kg CO2 has been almost one SEK, which is twice as high as the cost reported in a previous report, half a SEK.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

Sweden?s District councils and Country councils are in itself to a large extent responsible for the state financed welfare. Because of this, Sweden has a contribution- and adjustment system. The reason for this system is to create equal chance, for all District councils and Country councils, to be able to give the citizens service independently of their income and non-influential structural differences. The adjustment is built upon the so-called standard cost method, which contains four different parts.

Holmen Paper is one of Sweden?s leading manufacturer of paper, with two Swedish production facilities located in Norrköping and Hallstavik. The European continent constitutes the company?s largest customer base which makes the company?s distribution system an integral part of the business. Historically, much of the produced paper has been transported by vessels, as vessels allow large volumes of goods and deliveries to markets which are difficult to reach with other modes of transportation.

During the last decade, there has been an increase in the use of technology-based self-services within the retail sector. The increase is particularly noticeable within the grocery market. The reason behind the increased use of these systems is partially due to the fact that companies within highly competitive retail markets continually look for ways of decreasing costs while upholding efficiency. The problem is that it is difficult to understand the true economical implications of investments relating to these machines. The purpose of this study is to investigate and contribute with new insights regarding the cost-structures of the stationary self-checkout systems and traditional cashier desks, within the retail grocery market.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.