This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

Background: Sweden has, since 1983, had a statutory audit for all joint-stock companies. However, according to EG?s fourth corporation directive, member countries can decide on their own if this applies for small joint-stock companies. An investigation was launched in the fall of 2006 to form an opinion on the importance of the audit reporting by law and what an abolishment of this rule would mean for small joint-stock companies. Critics are claiming that the cost of audit for small companies is exceeding the cause in these micro companies.Audit is regulated by Swedish translation (RS) of International Standards on Auditing (ISA) and is to be applied in all companies comprised by the statutory audit.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Traditionally risk-based measures have been used to assess animal welfare in legislation and certification schemes. With increased knowledge and research, debate today tends to focus on and advocate the use of animal-based measures. However this is not a panacea for welfare and the most sound conclusion should be that assessment of animal welfare needs both. The aim of this thesis is to identify the points that need to be taken into consideration to find the optimal balance in the use of input and outcome measures according to the aim of the assessment and how these should be applied when designing a certification scheme? To answer this, a comparison of the use of resource-based, management-based and animal-based measures in two certification schemes for dairy cow welfare, Freedom Food (UK) and Svenskt Sigill (SWE), was made.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

The purpose of this essay is to evaluate stock index bonds return to risk ratio in order to investigate to which degree an investor in a stock index bond take part of the underlying index return and what the investor must pay for the security of not losing his funds. In order to carry out this evaluation an average return per year and the Sharpe ratio will be calculated and a mean- standard deviation analysis will be made. All investigated stock index bonds are based on a Swedish underlying asset.The results show that the stock index bonds haven?t generated a higher risk adjusted return than its underlying asset. The stock index bonds took part of 57 % of the underlying assets return, and the loss of 10 percentage points per year for the stock index bonds compared to its underlying asset can be seen as the cost for the guarantee a stock index bond gives..

Den vanligast förekommande sjukdomen hos unga kalvar med infektiös orsak i Sverige är diarré. Enterit kan leda till uttorkning, acidos, rubbningar i elektrolytbalansen och i värsta fall dödsfall. Snabbt insatt behandling är avgörande. Till kalvar med fungerande digestionssystem rekommenderas i första hand behandling med oral vätsketerapi. Endast lite forskning har utförts om hur kalvar helst dricker sitt vatten.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

This thesis analyzes the expected profitability in land based wind power plants. The expected profitability is calculated on the basis of a wind power project in Vartofta, Falköping. The information required to calculate the expected outcome is then concentrated to this project, which is in this thesis called project Näs. In project Näs they plan to build three wind power plants, with each an effect of 2 MWh. These wind power plants are very capital intensive investments with a long and uncertain payback time.

The purpose of this thesis has been about processing an already existing folder for a tax funded organization which is also the employer for this mission ? Expectrum. The reason is that both Expectrum themselves and the recievers of the folder are unhappy with the existing material. The critic that has been directed to Expectrum is that the recievers have trouble understanding what Expectrum is and what they do. Based on qualitative methods such as interviews and text analysis I?ve been able to answer my questions for this thesis.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.