At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

I have done a case-study about building a new stable for slaughter pigs at a farm close to Kalmar. The farm is able to supply the breeding with cereals and it has enough area to spread the manure on. The most important factors to gain profit, is the cost for building the stable, the price of the feeding-stuff and the growth of the pigs. The discount from the slaughter-house was less important than I thought from the beginning, and it?s a factor that is hard to influence. With the new production of slaughter-pig and cattle that already exist on the farm, the farm will get a well-functioned rotation of crops with lye and autumn rape as interruption-crop.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

According to the European Union waste hierarchy, waste should first of all be minimized. Reuse and material and energy recycling come next. Lastly the waste should be thrown at the refuse tip. In the inner city of Stockholm waste handling can be done in various types of ways. The solutions vary as a result of the type of architecture of the building and its condition.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

The background of this study is the fact that it nowadays is more common to grow wheat after wheat. Usually we plow every autumn to remove the straw, and we wanted to study the effect of alternative methods to do it. We have done this experiment to answer the question if no tillage is better than conventional plowing. The results of the field experiment indicate that there is a link between plant establishment and the choice of equipment, but also a higher weed pressure in experimental plots with only ground tillage. The equipments which left much straw on the top of the ground the problems with fungi were more severe.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

This dissertation aims to explore how an investment appraisal differs depending on if it is conducted by a municipal or a private real estate company. Municipal and private real estate companies are not performing on totally equal terms in the property market. A municipal company in Sweden has a public service mission. The consequence due to that mission is that they have limited yield potential but on the other hand the right to certain subsidies. They are also limited by the law of public purchasing (in Swedish: Lag om offentlig upphandling) in the investment process.

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

Previous research has, by studying large listed firms, identified cost reductions and knowledge transference as the primary reasons for outsourcing.  Previous research has also indicated that Business Process Outsourcing is likely to increase in popularity and experience high annual growth going forward. This study aims to explore why mid-sized and large firms decide to in Jämtlands län, fully or partly, outsource their finance/accounting activities. Theories regarding transaction cost economics and resource based view composes the foundation of this study and the information used has been gathered through the use of semi-structured interviews.  The results shows, like the chosen theories and previous research indicates, that the outsourcing decision is primary based on expected cost reductions.