The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

This study is based on interviews with heads of unit, care staff and senior representatives from a total of six people. We have in this study directed our focus on care quality in the elderly as a concept in development. It appears, when the elderly do not have any dependents, it is even more important that staff supports some extra where no relatives are involved.Quality of life is the broader concept of good quality care and where a good quality of care is a necessary condition for a good quality of life. According to the social services care is the target that older people will live a good life and be allowed to live in a safe environment, which we intend to investigate in this study. Opportunity for greater influence should now be given to older people and their families on how interventions should be designed and implemented.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

 There is a lack of research in the field of quality improvement efforts based on profound knowledge in social services. The current situation is therefore a significant knowledge gap in terms of studies of this type of systematic quality work and how it is applied in practice. This study therefore intends to describe Pilbackens quality work and further examine if the profound knowledge is consistent with quality work in microsystems by an analysis of Pilbackens work. The present study has been performed by a qualitative method and the material is collected through semi-structured interviews. In order to analyze the study?s result have profound knowledge and the model microsystems been used.

Swedish school has for the last decades been using quality management as a method for improvement. Quality management is an enormous work and the whole school staff needs to be involved. The management consists of several parts like planning, surveys and interviews, analysis of the replies and setting up new goals. Parents, children and teachers are nowadays accustomed with quality surveys. The last few years these quality surveys have been computerized, but they still look almost the same, using little interaction with the respondent.I have had the opportunity to work with the company KMF Ventures, which has a vision that entails a more interactive web survey.

Bachelor thesis, Business Administration and Economics Programme, School of Business and Economics at Linnaeus University in Va?xjo?.Spring of 2015 Title: Performance measurement from a cost leadership perspective - A case study on Gekås.Authors: Adrienn Csiszer, Hannah Lundberg & Helena WennerströmTutor: Eva GustavssonExaminer: Karin Jonnergård Keywords: Performance measurement, Performance measurement systems, Generic strategy, Cost leadership strategy, Financial and non-financial measurements. Purpose: The purpose of this study is to examine how a company with a clear cost leadership strategy chooses to work with performance measurements, with a view to comparing a practical example to theorethical approaches. Methodology: The method chosen for this paper is a case study on Gekås AB. The presented data were collected through interviews conducted with four employees on Gekås. Conclusion: The study concludes that for a business with cost leadership strategy the financial measurements are more important than non-financial meausurements. For Gekås it is important to keep the performance measurement simple and understandable for the employees. They only use three measurements (sales, hours and sales per hour) in planning and in evaluation.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

The need for auditing originates from the agency problem that arises due to the separation of ownership and control in companies. The purpose of the audit is to increase credibility of the financial statements that management uses to communicate with owners and other stakeholders. In order for the audit to fulfill its purpose a certain level of quality needs to be obtained. The auditor can also be seen as a provider of a commercial service in which service quality is important. Audit quality can thus be separated into technical quality, which is defined as the probability that the auditor both discovers and reports a breach in the client?s accounting system, and service quality, which relates to the provision of services in general.

What is customer satisfaction and when does it occur? Microsoft?s customers and partners state that product quality is the strongest driver for customer satisfaction. To be able to increase customer satisfaction Microsoft must know how their partners and customers define product quality. This study investigates product quality in general terms but also in the context of the product Microsoft Dynamics CRM in addition to experience from some of Microsoft?s customers and partners.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.