On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

Bakgrund: Dagens industriföretag har ägnat mycket tid och tankeverksamhet åt att förbättra produktiviteten men i regel betydligt mindre till att beräkna enskilda produkters kostnader. Allt högre krav ställs på en kundanpassad produktion med differentierade produkter. Produkternas heterogenitet innebär även heterogen resursförbrukning och det gör det svårt att veta vilka kostnader en produkt verkligen orsakar. Inom ABC är det kostnadsdrivarens uppgift att koppla samman resursförbrukningen med produkterna. Valet av kostnadsdrivare kan ge stora effekter på produktens kostnad och visa att produkter som tidigare betraktas som lönsamma säljs med förlust.Syfte: Syftet är att beskriva och analysera problematiken kring val av kostnadsdrivare.Genomförande: En fallstudie har genomförts kring val av kostnadsdrivare vid Swedish Tissue.Resultat: Det finns inga optimala kostnadsdrivare utan en komplex avvägning med kalkylens syfte i bakhuvudet krävs.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

Companies financed through borrowed capital are allowed a tax deduction for the costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

Inspired by the current debate over the effectiveness of Public Relations (PR), the authors of the following thesis have sought to analyze how PR and advertising differ in terms of how they affect consumers. The subject of the thesis was chosen due to the lacking knowledge of how PR shapes consumer attitudes and intentions. The authors wish to upset the institutionalized myths which dominate in the PR-business. One example of such a myth is that the effectiveness of PR can be measured by the number of press releases an activity produces and that PR?s superiority over advertising is due to its higher trustworthiness.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

Introduction: Sleep is necessary for human survival. Difficulty sleeping occurs in about one in four adult person in Sweden, insomnia in every ten. There are several reasons for difficulty sleeping, where stress is one of the most common. The quality of life and health are affected negatively. Treatment with proven efficacy against insomnia is not only sleep medication, but also cognitive behavioral therapy, CBT.

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

A common assumption in marketing is the wider variety of product a corporation has, the better for the consumer: more product - more choices. Companies often develop a line extension to broaden consumer range through product attributes including quality, function and design. These developed attributes within the product are not always optimal for the consumer. As a result, companies often become entangled in having a price higher than the cost and benefit of the products. This essay aims to analyze the consumer value of line extension products and how these evaluations relate to extended line product pricing.

Bakgrund och problematisering: Tjänsteföretag på konkurrensutsatta marknader motiveras att anpassa sina produkter utifrån kundernas efterfrågan där utvärdering och förbättring av en tjänsts kvalitet är ett tillvägagångsätt. Fallföretaget Vindsurfing.se studeras med en problembakgrund baserad på hur företag kan utvärdera kvalitet i sina tjänster och vilka positiva och negativa faktorer i produktionen av tjänsterna som går att identifiera utifrån kundernas uppfattningar.Syfte: Syftet med uppsatsen är att undersöka den av konsumenterna upplevda kvaliteten på de nybörjarkurser som företaget Vindsurfing.se erbjuder. Detta för att identifiera olika faktorer med påverkan på kvaliteten som kan ligga till grund för utredning av hur verksamheten kan utvecklas i framtiden.Teori och modell: Litteraturgenomgång med utgångspunkt i begreppet service quality, dess definition, tillämpningar och mätinstrument. Nyckelmodeller är bl.a. Grönroos (1984) ?Service-Quality Model? och Parasuraman et al., (1985) ?Service-Gap-model?.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.