The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis has been made in cooperation with Forsheda Stålverktyg AB which develops and manufactures injection moulds and diecasting tools. The main concern has been their Trading-system which provides them with considerable amount of quality lost function.Focus has to however be put on the analysis of the Trading-system due to the fact that this has previously meant various quality issues for the company.This thesis treats quality assurance of the Trading-system, identification of the problems in the process and improvements of these problems.Quality assurance is carried out when a company detects that their quality based costs become too high. Quality based cost are? the costs that would disappear if a company's products and its different operational processes were absolute? (Sörqvist, 2001 p.30, free translation from Swedish). High quality based costs often result in increased quality problems, which can lead to substantial economic loss for the company.This work has resulted in a thorough review of the Trading-system whereupon problems have been identified.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

This study investigated the performance and cost of scarification with a tractormounted excavator. Due to variations in terrain conditions the performance variedbetween 0.08 and 0.11 ha/E15h and, with a machine cost of 366 SEK/h, the cost ofscarification varied between 3 330 and 4 750 SEK/ha..

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

The purpose of this essay is to identify costs for providing First-line and Second-line support, and then allocate these cost to different goods and services (cost objects) being supported. The thesis also intends to improve the overall cost awareness in IT settings..

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

The resting area is the most important place in the barn for the dairy cow, sometimes called the heart of the free stall system. Inadequate design of the lying area, and lack of or poor quality of bedding materials may reduce the hygiene of the stall. Poor management regarding the cleanliness of the resting area may lead to poor animal hygiene and increased bacterial growth. This in turn will lead to increased risk for environmental mastitis as well as impairing milk quality through contamination with spores. In this literature study the most commonly used bedding materials; straw, sawdust, wood shavings, clean sand, recycled sand, peat and recycled manure solids, are compared to one another with regards to their ability to resist bacterial growth. Effects of adding hydrated lime to bedding materials have also been studied. Most bacteria need humidity and prefer a quite high water activity to be able to grow.

When the Eolshällproject was completed for the first time, a great deal of moisturedamage was discovered. Therefore the structure completion was removed andreinstalled. The project was originally planned to cost a total of 126 million SEK, but thefinal costs landed on 271 million SEK. What caused this failure? Were the designs poor,was the technology used too advanced, or was the project not managed properly?Based on the Eolshällproject, theses will be presented about what may have caused themoisture damage.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.

On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.

The role of the quality manager has evolved from being a quality controller to work with a more global business. Within many organizations in Sweden, however, the traditional role of the quality manager's remains and the tasks categorized as quality control still takes up most of the quality manager's time. The survey conducted as part of this master thesis shows that the quality manager in most businesses has multiple roles in addition to the role of quality manager, which can create a role conflict. One consequence of this is that each improvement is not given priority due to time constraints. Although the importance of a clear and committed leadership is the key for succeeding as the quality manager.

Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.

Does goodwill affect the cost of capital? Goodwill is an asset which is characterized by much uncertainty regarding both what it is and how much it is really worth. Based on economic theory about information risk and principal-agent problems as well as theory regarding the cost of capital we test for the hypothesis that debt and equity investors perceive goodwill as something risky and hence demand compensation for taking on this extra risk. The proxies used for the cost of capital are cost of debt, beta and the EP-ratio. On a general level we find that increasing the level of goodwill seems to result in higher cost of capital as represented by the three proxies.

On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.