This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Writers: Johan Lundqvist Eriksson and Elin SandbergSupervisor: Stig AnderssonEnglish title: Allocation of revenue in the hospitality industryKeywords: Revenue allocation, cost allocation, profit center, Du Pont model, taxes and manipulation of data.Date: January 2012Since the taxes for food and lodging has been different in Sweden for many years, the hospitality industry has come up with a way to save money on tax paying. When private customers stay for a weekend where the meals are included, the business is placing more than the relevant revenue on the lodging part, which has the lower tax. Because of this the results has improved and tax money has been saved. Now when the Swedish government has decided to lower the tax on food to the same level as the lodging, the chances for correct revenue allocation arises. When we approached the hospitality industry with our problem area a big interest was showed from the head chefs. They now see a chance to get more income on the meals and through this be able to show better results towards the owners.Two hotel managers at two different hotels and their head chefs were chosen for interviews.

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.

Uppsatsens syfte är att försöka förstå, utifrån existerande teorier och med hjälp av insamlad empiri, vilka parametrar i ett kundperspektiv som är av betydelse vid utvecklingen av en prissättningsförmåga bland business-to-business-företag.Vi har använt oss av en kvalitativ metod vars ansats är av abduktiv karaktär. Den empiriska datan har samlats in genom semi-strukturerade intervjuer vilka har genomförts via personliga möten samt via telefon. Då vi betraktar prissättning som en förmåga, vilken återfinns inom företaget, så utgår det teoretiska ramverket främst från det resursbaserade synsättet vilket styrks av en akademisk artikel som beskriver och förklarar bakgrunden till att prissättning kan ses som en förmåga. Därutöver beskriver vi den vanligaste prissättningsstrategin företag emellan; cost/plus-strategin. Vi argumenterar för att företag bör införa rutiner och skapa en entydig struktur, med särskild fokus på tre områden, för att försäkra kunden om att de erbjuder produkter med kundvärde.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

Swedish energy policy aims to increase the use of energy from renewable sources and this should be done in a safe, environmentally and sustainable manner. According to the Energy Agency the use bio-fuel increased by 73% between 1990 - 2006. Stands with high share of slash are often located on areas with high productivity which often are located on soils with poor bearing capacity. This will increase traffic on susceptible soil leading to increased ground damage. To reduce the risk of ground damage at slash-forwarding, ground protection is needed.

This work examines the students´ thoughts on climate change with a focus on carbondioxid through photosynthesis and the carbon emissions from cars. The study is based on two subject areas, one with a focus on enhanced greenhouse effect, and the other focusing on photosythesis. The survey was conducted by means of qualitative interviews with students in grades four and six. The results describe that student´s understanding for photosynthesis and the carbondioxids function for photosynthesis doesn´t change significantly from grade four to grade six. I have divided the students inte three levels based on their understandingof the various fields, and their use of adequate concepts.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

The purpose of the thesis is to examine the thoughts and opinions of a selected group of people regarding the terrorist attack that occurred in Stockholm 12/11-2010. This study has been conducted through the method of focus group interview. The study was methodologically and theoretically inspired by Grounded Theory, which simply means that the participants' opinions have formed the theory of the study. As a result of the study, we can see that the main focus of the discussion held by the participants was through a we and them thinking-perspective. Furthermore, the study reveals that the participants tried to include who we (muslims) are, and to exclude who they (non muslims) are, while arguing in the discussion. Another definition is the one of here and there, where the participants defined terrorism and what causes it. Finally, media's role was discussed in relation to the creation of the medie-muslim. To explain the participants' perceptive, part of Appadurai?s Fear of small numbers and part of Brune?s Dark magic in the white media was used..

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

Avsikten med uppsatsen är att utvärdera och analysera implementeringen av en ny teknologi, vilken befinner sig i en nätverksdriven marknad. Studien ämnar se till de överväganden företag står inför vid implementering av Anototeknologi, förändringar som implementeringen medför samt de för- och nackdelar som uppleves. För att nå syftet med denna undersökning används kvalitativa intervjuer uppdelade i två fall med två slutkunder till företaget Anoto. Teorierna som används och ställs mot empirin är disruptiv, plattforms teori, nätverkseffekter, switching cost & TCO. Uppsatsens empiriska material består av kvalitativ data erhållen från intervjuer med två Anotopartner: Penboosts Solutions AB och Catrel AB, två slutkunder: Würth Svenska AB och Hemtjänsten i Sundbyberg, tre användare av Anotopennan: två Würthsäljare och en hemtjänstarbetare, samt sekundärdata erhållen från de undersökta företagens hemsidor och annat informationsmaterial.