Sök:

Sökresultat:

2403 Uppsatser om Cost engineering - Sida 33 av 161

En vindkraftparks inverkan på Gävle Energis elnät

The effects from a planned wind farm on the grid utility Gävle Energis electrical grid have been studied. The wind farm is planned to be built in the forest 15 km north of Gävle and will have 23 turbines with rated power from 2 to 2.5 MW, resulting in a total installed power between 46 MW and 57.5 MW. The grid connection will be made at 70 kV. The aim of the analysis was to determine what effects the wind farm would have on the power grid in the form of electrical disturbances (flicker etc.), need for new investment and raised operational cost. To allow the connection of the wind farm technical solutions (new lines, power stations and grid reinforcements) have been constructed.

Annonsmarknaden på Internet och att konkurrera med Blocket.se

Syftet med denna uppsats är att skapa en förståelse för vilka bakomliggande krafterna som gör att människor använder Blocket och se vilka strategier som kan användas för att bryta dessa krafter..

Börsintroduktioner av fastighetsbolag ? En studie av 8 fastighetsbolag på Nasdaq OMX Stockholm

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Design and evaluation of an AGV-system for Tetra Pack in Lund using simulation

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Investeringsbeslut för energieffektivisering i monarken

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

Utveckling av rullstolsunderrede för individsanpassade sittsystem

I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

Femåringar berättar på svenska och engelska : Referensdata och jämförelse med 6- och 7-åringar

År 2009 startades det europeiska forskningsprojektet COST Action IS0804 med syfte att få mer kunskap om flerspråkiga barns språkutveckling och utveckla bedömningsmaterial anpassade för flerspråkiga barn. Inom COST Action fokuserar arbetsgruppen Narrative and discourse på berättelser (narrativer) som ett sätt att bedöma språk hos barn. Berättande liknar naturlig språkanvändning och anses ge en mer rättvisande bild av flerspråkiga barns förmåga än andra logopediska test. Av narrativgruppen utvecklades bedömningsmaterialet MAIN (Multilingual Assessment Instrument for Narratives). Med MAIN kan barns produktion och förståelse av berättelser undersökas på makrostrukturell nivå.

Internalisation of emissions costs from Swedish aviation

This thesis examines the emissions costs of Swedish aviation and their degree of internalisation under current economic instruments. The results show that the degree of internalisation spans from practically zero for a long-haul flight to 6 per cent for a typical domestic flight, where the climate cost, including high-altitude impact, makes up the main part of the cost. To inform evaluation of the consequences of this underinternalisation, or attempts to correct for it using price instruments, the price and income elasticities of international leisure air travel from Sweden are estimated using household expenditure data and two different price measures. The resulting elasticities are very high ? 2.03 or 2.04 for the income elasticity and -2.53 or -1.88 for the price elasticity ? and should be interpreted cautiously due to data limitations, especially for the price elasticities.

Förröjning i förstagalling - vad kostar det och följer utförarna instruktionerna?

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

Simulering och cykeltidsberäkning av automatiserad produktionslina med hjälp av Process Simulate

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

Vilka effekter har lojalitetsprogram på kundlojalitet? : En studie om frequent flyer-program och deras effekt på kunderna

The arm?s length principle has existed in Swedish law since 1928 but has previously been given little attention. In 2007, documentation requirements were introduced, and the government began to do tax audits regarding transfer pricing. This thesis examines how the documentation requirements and tax audits affect the application of the arm's length principle. The research consists of nine interviews with a total of ten people at the tax authority (Skatteverket) and audit- and consulting agencies. The results of the interviews are analyzed using the agency theory. Many companies are risk averse and prefer having correct transfer pricing instead of taking on challenging strategies that can be risky in case of an investigation by Skatteverket.

Förändrad aptering av massaved från 3- till 4-meterslängder vid gallring inom Södra : en systemanalys av effekter från avverkning till levererad virkesråvara

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

TaqMan® Sample-to-SNP Kit? : evaluation of kit for low-cost and fast preparing of DNA-samples before genotype analysis

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

Simple Contact Access

Målet med projektet är att utveckla ett system där det skall gå att komma åt information från en intern databas på ett enkelt sätt med en mobil enhet. Eftersom varje enskild databas är unik så skall det gå att justera systemet enkelt genom ett administrationsgränssnitt så att det passar till varje databas. Informationen är oftast känslig och skall inte åtkommas av obehöriga användare, så den mobila enheten behöver autentiseras för att skydda informationen. Systemet kommer alltså bestå av ett par applikationer:1. Webbtjänst som skall kommunicera med databasen och skicka information till webb- och den tjocka klienten.2. Webbaserad klient, skall kunna visa data från databasen.3. Tjock klient, skall kunna visa samt uppdatera data från databasen.4. Administrationsgränssnitt som skall kunna konfigurera webbtjänsten. För autentisering av användaren används telefon ID:et och sköts automatiskt av den tjocka klienten.

Optimering av B-stolpe

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

<- Föregående sida 33 Nästa sida ->