During the 1970?s the interest for quality management and the concept of quality costs increased considerably. Business leaders noticed that there was a great potential for reducing costs of poor quality. Since up to 10-30% of a company?s total turnover may consist of poor quality costs some consider them as an unexploited goldmine.

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

En billig och robust motor av stirlingtyp har konstruerats för användning i villor. Som energikälla används de heta rökgaserna från förbränningen i husets panna. Motorn driver en generator i permanent drift under den kalla delen av året då värme- och energiförbrukningen är som störst i vårt land. Under den varma årstiden finns den tillgänglig som reservkraftverk. Tanken är att stirlingmotorns värmare ska placeras i en villapanna för att ta till vara exergipotentialen hos dess höga temperatur.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

Målet med detta arbete är att undersöka och analysera en byggnad från miljonprogrammet i Helsingborg göra gällande energiberäkningar. Dessa beräkningar ska mynna ut i olika förslag till hur man skulle kunna styra upp en renovering av dessa byggnader så att de uppfyller de nya energikraven samt skapa en mer tilltalande estetisk byggnad..

This study concerns how organizations manage various problematic areaswhen implementeing Business Intelligence and experiences from BusinessIntelligence project failures on management level. In order to highlightthese questions, we have carried out interviews with four organizationswhich have great experience in working with Business Intelligence on adaily basis.The result of the study shows that all organizations deal with difficultiesregarding cost-benefit issues and justification concerning BusinessIntelligence investments. The result also showed that the organizationsfaced difficulties with integration concerning time and cost. Documentingand securing support systems presented different attitudes between theorganizations, primary in the question about sub complements to BusinessIntelligence and in the way that they were documented. In the discourse oflegal issues and privacy the majority of the organizations chose not to storepersonal information relative to legal security demands.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

Utvecklingen av informationssystem utförs vanligen med hjälp av en systemutvecklingsmodell där kravhanteringsaktivitetens (Requirements Engineering ? RE-processen) syfte är att samla in och bearbeta kundens alla krav på systemet. Den slutliga produkten av RE-processen är en kravspecifikation där alla kraven gällande exempelvis systemets funktionalitet, syfte etc skall specificeras.Det är inte alltid självklart vilken information som en kravspecifikation bör innehålla då detta dokument kan för både kunden och leverantören ses som ett kvitto på vad som skall utvecklas och hur det skall gå till. Dokumentet skall nämligen fungera som ett underlag för de så kallade implementations- och designaktiviteterna i systemutvecklingsarbetet samt fungera som ett underlag för diskussion och kontrakt mellan leverantör och kund gällande utvecklingen av informationssystemet. Kravspecifikationen bör därför innehålla komplett och förståelig information så att detta dokument uppfyller sina syften.