By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

This paper discusses the strategy and strategic change in the Swedish freight forwarding business and analysis factors that influence the forces of the business. Three companies of various sizes are chosen to be investigated as a case study, outline that cost leadership and differentiation are both important strategies for companies to compete in the market. However, companies outpacing competition do not only pursue either of the two strategies, the need the ability to add one (cost leadership) to the other (differentiation) in relationship to environmental change over time..

The main purpose of this study is to investigate the needs of pre-commercial thinning on private owned forest properties, which is considered to be increasing. The reason is believed to be the high cost of labor that pre-commercial thinning brings. Furthermore thinning is costly, the revenue created through pre-commercial thinning are post-poned until the first thinning. The study was made through a survey among members of Mellanskog forest owners association. The survey was distributed by e-mail. The time to answer was set to two weeks. The answers indicate that the most common reason why the pre-commercial thinning is delayed, or not done at all, is the forest owner?s lack of time.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

In today's fast-paced, intense and complex media environment, it is hard for non-profit charity organizations to reach out and get their messages heard.In this study we examine whether the theories of advertising signaling also applies for charities. Past studies of the signaling theories indicates that higher perceived advertising expense leads to more positive effects on purchase behavior and brand perceptions. However, we believe that this does not apply for a charity organization. We argue that since charitable organizations have a fundamentally different mission than commercial companies, they will need different ways to signal quality and credibility, and therefore the common signal-theories will not hold for these organizations.To test our hypotheses, we conducted two surveys where the respondents saw one of five versions of the same ad for a well-known Swedish charity organization, or one of two ads for a commercial corporation. The ads had been manipulated to simulate different levels of perceived cost.Our results shows that perceived ad cost only affects attitude towards the ad if a charity was the sender, whereas perceived ad cost affects intentions, attitudes and credibility if a commercial corporation was the sender.

Arbetet har utförts på ABB i Ludvika med avsikt att förbättra revisionsprocessenför kontroll och skydd. En revision är en ändring på ett godkänt och klarmarkeratobjekt. Då objektet i fråga redan kan vara levererat till kund och man behöver göraen ändring krävs en strukturerad process för att utföra denna ändring. Processen föratt göra detta är i dagsläget komplicerad och kräver en hel del administrativt arbete.Processen använder sig utav ett antal program för lagring och databaser så som,Lotus Notes, HiDraw Studio, och HiDra32.Avdelningen för kontroll och skydd är i fasen att övergå till ett annat elCADsystem, Engineering Base. Detta är också en av anledningarna att man önskar en nyprocess för revisionshantering.Arbetet bestod till en början av inlärning av den dåvarande processen.

Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

The aim of this report is to investigate, on the basis of two consult agencies perspectives, what the possibilities and obstacles are to integrate the work with antagonistic and accident related risks. The report is based on two consult agencies where each agency´s work procedure is represented by a risk management method. The work with accident related and antagonistic risks is analysed and evaluated compared to four different components. The components are risk management process (IEC´s and FEMA´s model), driving forces, education and competence, and resources to control risk management with COSO?´s ERM framework.

Examensarbetets frågeställning berör användarnas medverkan i Requirements Engineering (RE). Under RE-fasen skall samtliga krav på det kommande systemet tas fram från intressenterna. En viktig intressentgrupp i kravutvinningsarbetet är de kommande användarna av systemet. Resultatet av RE-fasen är en viktig faktor som påverkar hela den fortsatta utvecklingsprocessen samt hur lyckat det slutliga systemet blir.Detta examensarbete innebär en undersökning av vad användarrepresentanterna anser om use case-modelleringen i RE-processen. Undersökningen har påvisat att användarrepresentanterna är positiva till use case-modellering som arbetsmetod för att kartlägga kraven.

Failed system development projects are a common sight within the IT-industry. During the last ten years we have seen several more or less disastrous high profile projects being reported in the news. One aspect that might hold some of the responsibility for these failures is the fact that more organisations are knowledge intensive which makes their work processes difficult to capture in computer systems. How requirements engineering is handled becomes even more important in these cases, where processes are unpredictable and rely on individual judgement and knowledge. In this study we have examined the challenges of developing systems for knowledge intensive businesses through a method of qualitative case study of a university laboratory.

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.