Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The purpose of this study has been to examine a few Swedish advertisment producers opinions on the subject of viral advertising and especially the ethical aspects of hidden viral advertising. The specified purpose of this paper is to:To clarify the underlying reasons for the use of viral advertising.To clarify the advertising producers ethical views on hidden viral advertising.The essay is based on a qualitive research metod of an abductive nature where the empirical data is derived from interviews with three advertisment producers. Through a stratified selection method we contacted agencies that in one way or another uses digital solutions as an advertisment method. All interviews were conducted via the digital chat room Skype, one of the interviews were conducted with both picture and sound and the other two with audio-only.The following points are the essential conclusions of our study:Hidden viral advertising is seen as a rare promotional method in Sweden today, however, the viral-spread effect is more commonly used.The economic factors together with the spreading capacity of the viral advertising is contributing to one of the biggest reasons behind the use of viral advertising. In addition to these, viral advertising is seen as an effective way to stand out from traditional advertising.Viral advertising where the sender is hidden or unclear is always seen as unethical.

Internal communication is an important factor in organisations today. For many system development teams it?s critical that the communication works well. Without communication, success would be impossible. This study aims to highlight the effect communication has on the members of agile project teams.

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

In our thesis we will compare interior walls, both bearing and non-bearing. All of thewalls analyzed are currently used in production by Skanska Construction, who is alsoour employer/supervisor for the project. The different wall types will be comparedfocusing mainly on time, cost and workability. All of these walls aside from the nonbearingwall are constructed using concrete, either prefabricated or cast on site..

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

AbstractThe banking industry has during later years gone through several technological changes (Svenska Bankföreningen 2014). These big changes have led to several advantages seen both from a customer ? and corporate point of view. Advantages in easier usage, increased availability and more competition have made the banks more Cost effective at the same time as the customer is being offered better prices. Even though the advantages seem to weigh over the disadvantages there are still those who thinks that things where ?better in the past?.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.