This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

The feed is a major cost in the dairy production and there is a constant interest in findingalternative cost-effective feedstuffs. Competitive dairy producers have to seek ways todecrease their production costs and the pursuit of cost-effective feed rations contributesto lower costs of production. An interesting group of protein concentrates are rapeseedproducts like ExPro (heat treated rapeseed) which have during the autumn 2008 andspring 2009 been very favourable compared to other protein feeds.This study focuses on the feedstuff products ExPro and Raps-Drank 60/40 (rapeseeddistillersgrain). The potential use of ExPro in dairy cow feed rations are also explored.ExPro is a well known feedstuff but Raps-Drank 60/40 is a relatively new product andnot known for many farmers.A field study on the use of rapeseed products was made on a limited number of dairyfarms. The main purpose was to study the management of the feedstuffs on the farms.The Farms were selected in cooperation with two local extension services.

The purpose with our study is to investigate in which way a public field of action has succeeded to make the economic management more effective and also find out which factors/activities that have contributed to get the result of the budget in balance. We also want to find out in which degree the balanced scorecard (BSC) has contributed to the positive result of the budget. Method: We had started out from the qualitative method theory which is based on the hermeneutic theory, because we will interpret and understand. With this starting point we have chosen to use a case study with semi-standardised interviews supplemented with information from different documents, and to get the theoretic connection we have studied literature in the subject field. The analyse and even the theoretic connection have then started from, for this study, a special analyse model. Results: Througt systematic and target-concentrated management and through cooperated factors, with stress on a leadership that is both professional, visionary and un-combined, and there the staff´s is seen as a important resource, and there it is a clear strategy and objective to keep the cost of the activity within assigned budgetframe, has a public field of action, as the clinic of hab./rehab.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

The purpose of this paper is to examine how the traditional airlines' strategies are affected by the low-cost carriers emergence and their business model and in wich ways they can achieve profitability. Furthermore we also want to examine the factors that affect the airlines' efficiency and competitiveness.The results of this study shows that the growth of the low-cost carriers have affected the network airlines' strategies as they, among other things, had to also lower their fares. This has forced them to revise their cost and efficiency in their entire operation. The result has also shown that the network companies can not come down to the same level of low costs as the low-cost carriers, and must therefore examine their ability to increase revenues instead. .

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

Tången 2 is a building situated in Stockholm, Sweden. It´s built in the 1930s and contains both residences and businesses. The property owner, Diligentia AB, wants to lower the energy use in Tången 2. This report consists of an energy audit which clarifies the specific circumstances linked to Tången 2. Collected knowledge is then used, together with the results from the literature study, to decide energy measures to proceed with.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.