A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

The aim of this study was to investigate and analyze similarities and differences in trials and punishment from a gender perspective, during the inquisition in the episcopate of Linköping. A inquisition initiated by duke Karl but performed by archbishop Abraham Angermannus in the year 1596.During the working process a quantitive method was used in the purpose of getting statistic data considering number of men and women that were trialed and punished. A hermeneutic qualitive method was also used in the purpose of closer investigating certain cases that men and women were involved in. The theoretical concepts that have been of importance and used in this study are the individual and the female subject that is based on gender in judicial procedures.The results showed that 49 % of the men were trialed for quarrel. Not as many men were trialed for contempt towards the church and witchery.The most frequently used corporal punishment in this cases were flogging that were executed for totally 38 % of the men.The investigation also proved that men were punished with these forms of corporal punishments for showing their contempt towards the church.

The aim of this two year master thesis is to analyze how digital preservation is presented as a problem in the Swedish national strategy for the digitization and digital preservation of the Swedish cultural heritage. In order to study which assumptions about digital preservation exists within the strategy I apply the discourse oriented methodological tools presented by Carol Lee Bacchi, which focuses on discerning what problem or, rather, representation of a problem exists within a specific policy. This study is a post-structuralist discourse analysis. The main focus of the study is on what assumptions and prerequisites the dominating representation of the problem is based upon and how the representation has evolved. The main material of the study consists of public investigations conducted by the Swedish state, governmental propositions and replies as well as other public documents upon which Bacci's methodological tools are applied.Results show that digital preservation is primarily interpreted as a financial problem as the national strategy and its surrounding documents stress the need of cost-efficient solutions.

ABSTRACTTitle: Teenagers and their perception of fashion brands (Ungdomar och deras uppfattningar om modevarumärken)Number of pages: 42Author: Louise KindblomTutor: Göran SvenssonCourse: Media and communication studies CPeriod: Autumn term 2007University: Division of Media and Communication, Department of Information Science, Uppsala universityPurpose/Aim: To achieve a deeper level of knowledge and a better understanding of high school teenager`s perception of the three fashion brands Gucci. H&M and Canada Goose and too distinguish potential gender related differences in their perceptions.Material/Method: A questionnaire about fashion brands delivered to three schools in the Stockholm area.Main results: Teenagers perceptions of the three fashion brands Gucci, H&M and Canada Goose are more different than similar. This differences in teenagers perceptions are discernible in a comparison between the most usual and unusual associations that are related to each of the brands. Gucci is associated with success, wealth, excitement and uniqueness. H&M is for example seen as earth-bound and has in a comparison with the other brands reached the highest level of positive associations.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

This paper aims to give an account of, and to discuss the view-points and theories of different researchers on the christianization of Sweden, especially the province of Öland, during the early middle ages. Its purpose is to investigate how, and in what sense, their positions can be said to correspond to what we may know of the historical ?facts?. This will be possible by comparing different points of view with a study of the development in a single parish. An overall difficulty however, is the nature of the sources relating to the time in question, they are scarce or even non-existent.Part I of the paper consists of an outline of the field of research and the different theories put forward on the subject.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.

The value of game for hunting from a social economic viewpoint is an interesting topic that is currently being investigated in a Swedish research program. The amount of damages that the game stocks cause to the forestry is, and has been in focus for a longer period of time. Something that I saw as missing was an investigation of how much an active game keeping measure might cost in lost incomes for forestry in terms of reduced acreage for forest production. This question was the foundation for this investigation, which purpose is to give interested persons with decent knowledge of forestry an example of how cost estimation for forestry resembling the example that is studied can look like. The measures that has been taken is a felling of forest in different ages on both sides of a forest dirt road to create increased asset of forage for the game, and at the same time give hunters that have their post along the dirt road a better chance of seeing passing animals early and increasing the possibility to shoot good shots. The area, which is a part of The Swedish Association for Hunting and Wildlife Management estate Öster Malma, is also used as an example for guests who wish to learn more about managing ungulates. These guests have now got the opportunity to get information on how big the costs are for the measures that have been taken. The main conclusions of this work is that changed timber prices and foremost a change of interest rate makes big differences on the result of the calculations.

This project is based on my fathers farm which lays outside Löberöd, twenty kilometres south of Eslöv in Skåne. While my family for some time have thought about building a new milkingstable with AMS(Automatic milking system) I decided to compare the AMS with a conventional milkingstable. We are abit concerned about how many cows we should have in the new stable. Because of that I calculated with two different number of cows. I have compared three different types of milking stables: One alternative is 180 cows milked in a double eigth hearing bone milking stable. The second alternative is 128 cows milked with two DeLaval VMS-robots. The third alternative is 171 cows milked with three DeLaval VMS-robots. One salesman from DeLaval and one salesman from A-betong helped me to get marketprices on the milkingrobots, building, ventilation and prices on all the concrete. In all the costs labour is included. The rest of the costs are calculated in a softwareprogram called K-data 03 which is a program with predicted costs. The calulations from the program showed that the price in the milkingpit system was 51 000 sek per cow.

The thesis has been written as a part of the Bachelor degree in Industrial engineering and management at the School of Engineering in Jönköping. The work is focused on the part of Husqvarna AB?s supply chain that is associated with the lorry transports to Italy. Husqvarna AB has approximately ten Italian customers, whose delivery patterns have been studied from January 2007 to July 2008. Some of the customers have a low delivery frequency and small amounts of goods that they therefore have not been fully analyzed in this report.

This bachelor?s thesis examines contemporary views on Angels and how two modern writerson the subject introduce these beings. Presenting a comparison between the two modernwriters, and also, as a context, contrasting them to some more traditional biblical as well assome modern Christian material, some of the beliefs surrounding Angels are discussed. Thecontemporary views and beliefs are analyzed through a model on how globalization affectspopular religion of today..

Today cultivation of cereal in Sweden has high costs for establishment in relation to the rest of the world, and if this cultivation will be able to continue, the farmers have to control their costs. It is important to see all costs, not the maximum harvest achieved, but the net result. All farmers have different conditions with respect to soil, direction of the farm and were the farm is located geographically. With the right knowledge and ambitions, we think most farmers could change to reduced tillage. In this paper we have tried to find out if reduced tillage is an alternative for farmers.

Title: Diversities of diversity - fluctuating talk, meaning and practice of diversitySeminar date: 06.02.08 Course: Masters thesis in Business Administration, Programme for Managing People, Knowledge and Change, 15 University Credit Points (15 ECTS). Authors: Björt Ólafsdóttir & Clarissa Sia Choon YenAdvisors: Mats Alvesson & Susanne LundholmFive key words: Diversity, Discourses, Hypocrisy, Comparison, National contextPurpose: To identify and compare discourses around diversity within two companies operating in two distinct national contexts. One originated from and still situated in Iceland, while the other is a subsidiary for Asia-Pacific market in Singapore with American values from its headquarters in United States. We wish to explore what are the meanings and implications of diversity for the employees of each company, how their discourses on diversity reflect hypocrisy in the organizations and if and how national context has an impact on discourse on diversity.Methodology: Interviews were conducted, transcribed and codified. Comparison and evaluation of the different discourses were examined around diversity and in the talk of interviewees within the two companies.