This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

Background: Oil is the most dominating source of energy of today, it constitutes for more than 40 per cent of the worlds total energy consumption. This together with the fact that stock in oil companies has soared on the stock exchanges around the world makes oil a very interesting topic to write within. In order to gain knowledge in how to value oil companies, the authors will collect information from theory and through a questionnaire. By applying the information gathered to three companies listed on the Stockholm Stock Exchange the authors will reach an objective picture of valuation of oil companies.Purpose: To investigate how shares of stock are valuated in the oil exploring and producing industry, and what specific measures and metrics that are used in the valuation of stocks in Exploring and Producing (E&P) companies.Method: By using a qualitative approach for this thesis, the authors will investigate how the valuation of oil companies works and what measures that should be applied. The authors will use a part descriptive and part explorative study.

This thesis paper discusses the results of a survey which was conducted to investigate the potential usefulness of mobile apps in the maintenance department at Perstorp Specialty Chemicals AB. The paper contains four sections, a theory section, a method section , a section that explains the functionality of the app, and finally a results section where the results and conclusions of the survey are discussed. The theory section explains and discusses relevant terminology used in the computer science field and in the maintenance industry. The theoretical model used in this paper is also discussed. The methods section gives a stepwise description of the project and a description of platform and software used.

During the past few years an increased attention has been paid to environmental issues in the construction and property sector in Sweden. In order to simplify the work with these issues a Swedish environmental certification system for buildings called Miljöbyggnad has been developed. This thesis aims to investigate the opinion of a selected number of selected property owners of Miljöbyggnad. From that basis recommendations and actions for the future work with the system will be presented.The investigation has been conducted through personal interviews with five property owners. The main issues that the interviews have been based on are their purpose, experiences, perceived complications and future prospects in terms of certification using Miljöbyggnad.The system intends to be cost-effective, simple and to offer a relevant environmental assessment of buildings and the result from the report indicates that this is largely fulfilled.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling calculations have been performed within the estate every tenth year.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.